I have a design in mind. Just wanting something I can hitch to the back of the bike for more camping/rally/meet up gear and the likes of. Also, I am going with a Trike conversion kit from Voyager. After last fall's rear tire blowing. This old boy has a little PTSD when it comes to riding on just two wheels. I handled it and kept it up. But I may not if there is a next time.
@@xanbiker What Kind of bearing ? if its sealed the fitting zerk is fake . what rating are the tires is it Highway 70 MPH safe . I see a End cap on the axle hub . Little things can be a life saver .
@JCcanU I have had both outer bearings out they are well packed. The grease zerts are on the back side of the hub, so you grease your axle and bearings without pulling them out to do so. They are not fake, for I added more grease through them to be on the safe side.
@JCcanU I had to knock out the hubs from the back side in order to place hubs assembly onto the axle and secure with washer, castle nut, and cotter pin.
@@xanbiker I would weld a floor and then I would weld boxes on it for storage or I would create a box at aluminum and weld it so I could store stuff in it
looking good Xan..you beat me to the trailer bit though...LOL can't wait to see what you end up doing with it.
Nice looking tent setup.
Nice kit thought about one, too.
Can't wait to see what you are going to do with this.
I have a vision... LOL. Maybe a Hallucination?
Great video XanBiker. Cant wait to see your build on to it.Thanks for sharing 👊✌️
I have a vision for it...but may be an hallucination. LOL
Nice 😎👍👍👍
Nice looking trailer
Thanks, more to come on this.
I sure hope it tows well. Be safe!
That's the plan. Thanks for watching Eric.
I'm intrigued
I have a design in mind. Just wanting something I can hitch to the back of the bike for more camping/rally/meet up gear and the likes of. Also, I am going with a Trike conversion kit from Voyager. After last fall's rear tire blowing. This old boy has a little PTSD when it comes to riding on just two wheels. I handled it and kept it up. But I may not if there is a next time.
XAN 👋👋👋
it's a start
Looks Good , hope it pulls nice for you . Keep and eye on the wheel bearings each spring if they are Tapered re pack them .
It has a grease zert in the hubs for the bearings.
@@xanbiker What Kind of bearing ? if its sealed the fitting zerk is fake . what rating are the tires is it Highway 70 MPH safe . I see a End cap on the axle hub . Little things can be a life saver .
@JCcanU I have had both outer bearings out they are well packed. The grease zerts are on the back side of the hub, so you grease your axle and bearings without pulling them out to do so. They are not fake, for I added more grease through them to be on the safe side.
@JCcanU I had to knock out the hubs from the back side in order to place hubs assembly onto the axle and secure with washer, castle nut, and cotter pin.
It is open tapered roller bearing. Not a sealed bearing.
😎👍👍
Thanks for the emojis. It is nice knowing who is watching!!!
I see it now.
Like I said not much but there is potential.
@@xanbiker I would weld a floor and then I would weld boxes on it for storage or I would create a box at aluminum and weld it so I could store stuff in it
@@raysmotolife yep, yet I want to keep it light weight, water tight.