Yea I just realized I didn’t add a screen shot of that fig, according to the set it came in it’s an “ASP Droid” but it doesn’t really look like one lol
Would you consider doing a video giving us a closer look at all of the figures in the display? Since the series started with quite a few figures in the display anyone who hasn’t been new or needed a fix has only been viewable at a distance and I think it would be cool to see them all. Maybe do an overview video like what I’m describing at the end of the series?
The 1x2 plates on the bottom of the figs legs (that attach them to the stand) could crack the bottom of their legs. You should try part 93095 instead for those with normal legs
As a freelance artist myself who has done a couple comissions, I can tell you it's not easy... First of all it would cost a lot of money, the artist would have to make a new design, test a lot, 3D print, then mold, then print... It's a lot of effort and artists are not companies, so that effort would take a lot of time as well... It's just easier for them to just do it out of passion and once they have a good design sell a bunch of them... So yeah it would be much more expensive, you would have to wait for months and its difficult to find someone that would do it and also do it really well... Not impossible tho, try to find someone 😂😂😂
@@garbotoxins840I knew a guy who knew a guy who did the leg print, that was just a right place at the right time kinda thing not something I can do again
I’m pretty sure the buzz droids buzz saw is supposed to be the attached by the other section, idk if that makes sense but I think I got the point across Edit: I also believe in the complete saga the 1x2 plate is also supposed to be dark grey instead of light grey like it is on the set
@@imperial_brickz The 1x2 plate that connects to the "angled axle connector" is 1 stud too low. Move it up one, the saw isn't the issue fyi. Your collection is so damn cool though and I only want to see it completed 100%
@@imperial_brickz also sebulba was part of the game (the piece for him exists, he was part of the game, but he was unplayable, however unlike the game it's not printed so that's another one to collect!) There's also a few other characters from that pod race scene, such as mawhonic which exist, but in different colors and might be worth adding to the list, i saw a few folks make some of them
It wouldn’t be that hard. They’re all mostly Brickville except for the first two which were pad printed, but I don’t know how exciting that would be for anybody😭
I think the only respectful thing to do is take the whole thing over again and restart from square one with all new minifigures. For your communitys sake.
A childhood dream come true if I'm being honest.
@@Blaster1360 🫡🫡
1:40 The game calls it droid 3
The collection is going great, thanks for sharing!
Yea I just realized I didn’t add a screen shot of that fig, according to the set it came in it’s an “ASP Droid” but it doesn’t really look like one lol
That light bluish gray 1x2 plate on the buzz droid should be another dark bluish gray jumper.
Also it holds the saw from the top handle, not the back.
it’d be cool when you’re done with the minifigures to collect all playable ships and vehicles!
Would you consider doing a video giving us a closer look at all of the figures in the display? Since the series started with quite a few figures in the display anyone who hasn’t been new or needed a fix has only been viewable at a distance and I think it would be cool to see them all.
Maybe do an overview video like what I’m describing at the end of the series?
@@markdarc0448 I’m working on something don’t worry
You must have so many Minifig orders because you get delivered a new figure everyday 😂
not sure if you saw, but the light nuget Anakin ep2 head is available on nichi customs, if I remember correctly you still were looking for it ?
as well as the light nuget Jango fett/disguised clone head, not sure if you already secured these or knew .
@@kaeden8900yes! Thank you!
The 1x2 plates on the bottom of the figs legs (that attach them to the stand) could crack the bottom of their legs. You should try part 93095 instead for those with normal legs
You must be knew here.. #imperialbrickz #legostarwarsthecompletesaga #legostarwars
Beyond the missing second line, the shading seems to be far too dark on the new one and the line color on the old one seems more accurate.
I know there’s just nothing I can do atm. If I ever see a better one it will be acquired
4:24 u mean Lobot;)
I see what you did thete
I applaud you for your work here! Keep it up :))
Can you not pay someone to commission a specific minifigure as supposed to waiting for them to make one at their own pace?
Do you know anyone?
As a freelance artist myself who has done a couple comissions, I can tell you it's not easy... First of all it would cost a lot of money, the artist would have to make a new design, test a lot, 3D print, then mold, then print... It's a lot of effort and artists are not companies, so that effort would take a lot of time as well... It's just easier for them to just do it out of passion and once they have a good design sell a bunch of them... So yeah it would be much more expensive, you would have to wait for months and its difficult to find someone that would do it and also do it really well... Not impossible tho, try to find someone 😂😂😂
He has done that for Endor Leia recently, I think with the unique torso.
@@garbotoxins840I knew a guy who knew a guy who did the leg print, that was just a right place at the right time kinda thing not something I can do again
I’m pretty sure the buzz droids buzz saw is supposed to be the attached by the other section, idk if that makes sense but I think I got the point across
Edit: I also believe in the complete saga the 1x2 plate is also supposed to be dark grey instead of light grey like it is on the set
@@stevenpendell2481 thank you, I will fix these things in a future video 🫡
@@imperial_brickz okay cool, you should probably double check, I’m not certain but I think that’s how the one from tcs is
@@stevenpendell2481 will do
@@imperial_brickz The 1x2 plate that connects to the "angled axle connector" is 1 stud too low. Move it up one, the saw isn't the issue fyi. Your collection is so damn cool though and I only want to see it completed 100%
I look forward to these videos every week
@@whoisphantom I love to hear it! Lots more Imperial Brickz content in the works🤝😁
4-LOM is suppost to have 2 stripes on his torso!
Watch the whole video!
I’m going to keep asking
Will you put the Anakin skywalker (dark side) character that is in the TCS port for mobile or no
the skeleton is an easy extra toggle
@@Decigtzu 😳
@@imperial_brickz also sebulba was part of the game (the piece for him exists, he was part of the game, but he was unplayable, however unlike the game it's not printed so that's another one to collect!)
There's also a few other characters from that pod race scene, such as mawhonic which exist, but in different colors and might be worth adding to the list, i saw a few folks make some of them
I say after this you make a gonk collection where you collect all the gonk figs (I’m joking)
Love the collection! It looks awesome
It wouldn’t be that hard. They’re all mostly Brickville except for the first two which were pad printed, but I don’t know how exciting that would be for anybody😭
@@imperial_brickz lol
What happened to Bib Fortuna?
@@MilesC.325 wym?
will you get a custom tcs bantha?
Yes but not if it’s 3d printed or resin printed
Will you eventually be giving all the characters their respective accessories?
@@Wheaty03 at the end I will 🤝
You added Padmé?
Wym?
It’s an ASP droid
@@SolomonMagnus819 yes thank you 🫡
Hopefully I get my 4 Lom soon. I ordered it from LSW toys on 9/12 but it still hasn’t arrived :(
@@austinshepherd0901 they come from overseas so that might have something to do with it
@@imperial_brickzyeah for sure. I must have just got lucky last time. My previous order from them only took about a week.
Hyppèee🎉🎉🎉🎉
🫡
Hey brother I still haven’t received a response through email regarding your brickheadz
Nice! but Jawa torso in not TCS accurate:/
Version from the game is like a like a tusken torso, but brown:)
Nice try (Why are the legs inverted like that!?) #imperialbrickz #legostarwarsthecompletesaga #jawa
I think the only respectful thing to do is take the whole thing over again and restart from square one with all new minifigures. For your communitys sake.
Wym?
@imperial_brickz you know like donating all the figures you have and starting from square one. Just so you can make everyone happy.
@@Datsunz-fr2nw 😄