Exhaust Manifold V6 Engine SolidWorks Tutorial 2021! Learn from homee :D
HTML-код
- Опубликовано: 21 авг 2024
- Hello friends, and welcome back on my channel, in this video I am making the Exhaust Manifold from an V6 Engine. I hope I am helping you with this videos to learn SolidWorks faster! If you have any parts like this and you want a tutorial about them, leave a comment, and I will answer you as fast as I can :D
Thank you for watching, and I hope to see you in the next videooo :D see you!
And if you want to support me, you can leave a like/share or subscribe :D
1) CrankShaft: • V6 Engine CrankShaft S...
2) Piston: • Piston V6 Engine Solid...
3) Engine Block: • V6 Engine Block SolidW...
4) Rocker Arm: • Rocker Arm V6 Engine S...
5) Cylinder Head: • Cylinder Head V6 Engin...
Here is my Facebook page where I am posting some of the drawings that I am using for my videos :) I will try to upload drawings every Sunday for the previous week.
/ alexs-engineering-1146...
#SolidWorks #CADCam #V6EngineSolidWorks
Sharing is Caring, any support is welcome www.tipeeestre...
Download drawing from here:
www.pinterest....
-How to activate "Dynamic mirror entities" see in this Tutorial:
• SolidWorks Double Bear...
-How to limit Movement in Assembly:
• How to LIMIT the MOVEM...
-How to make a MOLD:
• How to make a MOLD in ...
-How to use BELT/CHAIN command:
• How to use BELT/CHAIN ...
-How to make EXPLODE VIEW:
• Explode View!! SolidWo...
-How to use AUTOTARCE :
• How to use AUTOTRACE t...
-How to Engrave a Picture on a Sphere:
• How to ENGRAVE a PICTU...
Can you put the 2D drawing of the Exhaust Manifold ? thank you
Check the description of the video, and if you find it there, leave a like 😁
@@AlexsEngineering best like :)
I discovered errors in the V6 engine (block), when assembling it, it doesn't really fit, the shifting of the two halves is wrong. Not 12.7mm but 25.4mm.
And where is the error? Whatch the tutorial, is 12.7 mm from the center point to that center line and when you rotate it becomes 25.4
@@AlexsEngineering when I place pistes in the pipe openings of the block, it does not fit on the crankshaft
Yes, I did it wrong, I didn't turn it 180 degrees, but mirrored it and then moved it by 12.7mm. I have to change that tomorrow to 25.4mm
@@w.binder-freecadchannel be careful next time 🙂
@@AlexsEngineering 👌
can you put 2d drawing of Exhaust Manifold V6 Engine?? :)))))