oi como faz tempo este video. e não sei se esta vivo kkkk... vou me ariscar kk uma prgunta .... como fazer para funcionar no programa lightburn ...tem como ? sou leigo
Hey what is your battery's mah? I have used li-on bettry 3.7 volt 1200 mah (3 battery in series) in same motor driver but after battery connection my motor drive' IC is started to burn so what is perfact mah and volt for this motor driver
Pls use 7 volt bez i have experience my bettry volt is 3.7 and using 3 battery in series so. Ic was burn pls use a powerbank in aurdino by usb and give extra power by adapter in arudino don't gave power in motor driver i have two time experience
I have connected 12 v 300 rpm Johnson motors to my shield and a servo too but one of the motor isn't running , all other motors are getting voltage but one motor is lying in between 1v and the shield ic is getting heated , how to solve?
Bro till how much mah battery we can plug to motor driver shield bro can I use 4.2 v 6000 mah battery of 2psc is the motors works good bro plz give me a solution bro plzz
but bro when I keep my 20000mah powerbank it is not supporting that means car is not moving at all why bro means for 6000mah 2 psc means 12000mah it is. Ok naa bro
ULTRA FIRE xd, 4800 mAh yeah in what reality. Max capacity for 18650 is around 3500 mAh closer to 3450. I once was young and stupid too and bought 16 18650 from ultrafire 8 with 7800 mAh and 8 with 8800 mAh. To obtain real capacity value you simply need divide by 10
![Jack Harlow - Hello Miss Johnson [Official Music Video]](http://i.ytimg.com/vi/Q86_nlRoIGw/mqdefault.jpg)
We use af motor library of gear motor in voice control car(arduino)
Plzzzz tellll
If you are connecting your shield with External power supply, then you should remove the jumper at PWR port. 3:14
oi como faz tempo este video. e não sei se esta vivo kkkk... vou me ariscar kk uma prgunta .... como fazer para funcionar no programa lightburn ...tem como ? sou leigo
😂@@janeofernandes6054
that was crucial info thanks
This card is used to control a servo that consumes a voltage of 8.4v? And how much should I feed her?
Really helpfull. Thanks🙌
Hey. When I use the shield are there any inputs left for buttons or sensors?
yes, GPIO pin 2 and 13 are unused
also A0 to A5 are unused
I couldn’t find a battery holder could you tell me how to fix it please ?
Thanks bro happy to see your videos
Is L293D motor driver module compatible with raspberry pi?
Can we run motors with pwm signal????
sir , in my moter driver shield l293d, when i connect moters it is not working. i am useing 12 volt battery, plzz reply.
12v voltage is good.But check again your code
I have problem with the outer voltage m4 it gave 7volt but the 3 authors it gave me 2volt what is the problem,?
My battery zee 7v 5200mah
My motor driver is making a beep sound i created an obstacle avoidng robot its not moving znd making beep sound whats the reason
Amae
Same
you may not giving enough voltage
well explained, but the audio description could have been better.
Thank you
Super bro I will understand easily
My motor driver is not working with gear motor but working with servo after one ic got overheated please reply....
Check your wire connection.
@sritu_hobby it's all fine I even changed the ic on the shield but also it is not working
Bro at a time power supply to arduino and shield one of battery and USB same time to power on what happen bro
How to connect this Arduino and L293d with nodemcu esp8266?
@@sritu_hobby is it possible?
Is there a way to power it besides battery?
iam too late 😓, but if u see this can you tell me if this driver shield can plug-in 4 gear motors?
yes of course
How many rpm of motor
I made light tracking robot all working but only left side motor is working not right side and motor is 100rpm plz reply
Hey bro have your problem solved?
Hey what is your battery's mah?
I have used li-on bettry 3.7 volt 1200 mah (3 battery in series) in same motor driver but after battery connection my motor drive' IC is started to burn so what is perfact mah and volt for this motor driver
4800mah
Hey I have connected 2800 mah 1.2 v 8 battery in series and after 1-2 minutes my motor driver's Ic heated like glue gun what to do ??
Pls use 7 volt bez i have experience my bettry volt is 3.7 and using 3 battery in series so. Ic was burn pls use a powerbank in aurdino by usb and give extra power by adapter in arudino don't gave power in motor driver i have two time experience
@@kaushaltrivedi8877 ok ,thanks
And one more thing if I run 2servos IC does not heat but if I connect normal dc motor it's starts heating in 5seconds
I have connected 12 v 300 rpm Johnson motors to my shield and a servo too but one of the motor isn't running , all other motors are getting voltage but one motor is lying in between 1v and the shield ic is getting heated , how to solve?
Is your problem solved?
Please make LDR sensor control of &on reverse & forward
Nice..but how conect multiple servo and one stepper?
2 servo motors and 2 stepper motors
@@sritu_hobby i need 1 stepper,3 servo 🥹
thank you so much
thank you very mach king:)
Can I use 9v battery to test it and in future projects?
You will
@@sritu_hobby Can I use 9v battery pls answer yes or no I am getting confused
You can use
@@sritu_hobby Ok thanks
Plus I commented on that Voice control+Bultooth control+Obstacle Avoidance video. Pls reply to that question
How many gear motors can the motor driver control ?
Two
Why only 2 tho it has many attachment point (sorry i'm new in the electronic world )
Bro till how much mah battery we can plug to motor driver shield bro can I use 4.2 v 6000 mah battery of 2psc is the motors works good bro plz give me a solution bro plzz
Its not issue..
Thank u bro
but bro when I keep my 20000mah powerbank it is not supporting that means car is not moving at all why bro means for 6000mah 2 psc means 12000mah it is. Ok naa bro
Bo motor test not working . I used a 9v battery but it didn't work I used li ion battery but it also didn't work. What should I do now ?
Check your motor wires and program
Very. Nice
why servo pin is 10 in code
if i use stm32 which is the signal pin, how are you going to control the dc motor
bro i uploaded the code but my servo in not working plzz tell😘
Please visit my website for this issue
I have made Arduino blutooth control car with sensor . It gets connected but does not run . Please help.
Please check my previous videos
Ok thanks
Good video thanks
You're welcome
Bro is it necessary to first join the circuit then code the Arduino? Can i first code the Arduino the join the circuit???
Yes you can bro!!
@@romnathbaba3287 does it work same
@@romnathbaba3287 But my Arduino is getting heated
ULTRA FIRE xd, 4800 mAh yeah in what reality. Max capacity for 18650 is around 3500 mAh closer to 3450. I once was young and stupid too and bought 16 18650 from ultrafire 8 with 7800 mAh and 8 with 8800 mAh. To obtain real capacity value you simply need divide by 10
يتعذر الاشتراك ولا يوجد جرس-يتعذر التعليق - لا أعلم .
❤❤
Really helpfull. Thanks
where is the programme
how to connect L293D Motor Driver Shield to the Raspberry Pi
Its code can be found??
Plz send me
Please visit the video description
@@sritu_hobby thank you so much
Make drone with arudino chip
Ok sure
Where is the code?
Description
code?
Description
My Arduino is getting burnt anyone have any idea y it's happening
Check your power source
L298n vs L293d motor driver
Give me code please
Please visit the video description
hello, give your arduino code
Check the video description
Hlo
English??
Is L293D motor driver module compatible with raspberry pi?