Nema 1 000 w jer postoji procep ili otvor u sredini jezgra, mora da se ukloni otvor u sredini sa brusnim papirom koji se kvali vodom i da površina bude staklo da obrušena površina bude ravna, koristiti vodeni brusni papir finoće 300. Procep ili otvor u T jezgru i rastojanje određuju kojiko snage može feritni trasformator da izbaci.
What a shithead he is to leave that out... In a similar video it was 4 wires with a smaller transformer at .75mm I imagine this one is similar but more because it's higher watts, maybe 6-8?
Hey friend,You can't use ferrite with air gap in push pull tplgy. Primary winding must be 2*3 turn not 2*6 or 5 turn With 2*5 turn you are underutilizing the core
Mantap sahabat ku sukses selalu
Welche Drahtstärke hat die primär und sekundär wicklung? viele grüße.....
Hello, I want to make a transformer for an inverter with your formula. Does this transformer really work and give real 1000 watts?
Nema 1 000 w jer postoji procep ili otvor u sredini jezgra, mora da se ukloni otvor u sredini sa brusnim papirom koji se kvali vodom i da površina bude staklo da obrušena površina bude ravna, koristiti vodeni brusni papir finoće 300. Procep ili otvor u T jezgru i rastojanje određuju kojiko snage može feritni trasformator da izbaci.
Bhai ji secondrcoil ka swg batai thank you
### 1000 watts energy requires 12vDC at battery draw of 83 amps current. How can you get 83 amps at high frequency through tiny wires....???
Inverter push pull does not use air gap in ferrite when put together. Wrong part number. Old core set may have been for an inductor.
Ne zna autor videa za snagu i veličinu otvora u trasformatoru, he he he.
Bhai ji primary swg kaya hai batai
What is wire gauge number ? not mention for video
Hello sir, what is primary and secondary wire gauge?..... please tell me. Thanks.
21 swg wire
For good work
@@tahirshah2589sure
Which Wire Gauge no sir
My friend, when the transformer was wound when I turned on the inverter, it closed it short in the battery, why
What exactly do you power the transformer with?
@@dagon6469 My dear brother, I ask you to work for me an oscillator circuit to operate the transformer
I can but where will send you the circuit diagram
Gaped core not used for push pull configuration
Só que ele não sabe disso, também não diz a bitola do fio, a pessoa pra postar um vídeo, tem que saber o que está fazendo.
@@joaoreinaldo1213 Razmak potvrđuje da telo tarsformatora daje manje od 100w he he he.
Primary how many wire?
What a shithead he is to leave that out... In a similar video it was 4 wires with a smaller transformer at .75mm I imagine this one is similar but more because it's higher watts, maybe 6-8?
It's is an Old TV kit AXt transformer
Why 96 turns and not 76
Coper wier k SWG...kya hai...?
hola faltaria las medidas de Los alambres de cobre
Hma EE55firetcor tansfrma kua milaga
Hey friend,You can't use ferrite with air gap in push pull tplgy.
Primary winding must be 2*3 turn not 2*6 or 5 turn
With 2*5 turn you are underutilizing the core
Млм/2 транзистор .фет ?
Where part2
Transformer size
bhai mere usme jo tar lagya h uska numbar b to batyo
gud morning sir
am from Nigeria
so sorry to ask.
the calculation for this is what?
(96turns-5turns)? am confused
96 turn secondary and 5 turns primary
This is wrong method of winding the 5+5 turns, it should have been wound in buffila method
After dasaktia
ٹیلنٹ تو آپ کے پاس ہے مگر افسوس کے زبان نہیں ہے
😂
Lol🤣 lulusan chat GPT
Hmmm... rdzeń że szczeliną nie nadaje się do push pull....
Fake.
Vídeo horrível, não informa número dos fios.