Totally agree with your 4x4 and 5x5 choices, so going to go with your picks for 6x6 and 7x7. I just recently got into 4x4 and 5x5, so don’t have a 6x6 or 7x7 yet.
I have a suggestion for you for pyraminx. You can try the yuxin little magic, because it's similar to the bell V1, is very cheap and has better performance imo. Hope this helps!
The little magic is great, but is kinda a luck or bad luck kinda thing. Yuxin change the plastic on the newer batches, so is only worth getting if you can find the old batch.
I have a question that I have been wondering for quite a while. When I got my Yuhu V2, it was terribly slow out of the box, and I was mourning my 13$, although pretty soon after break in it was good. After a few more months with it, I got the Dayan pro, and was straight away amazed by it out of the box, because it was so much faster than the Yuhu V2. So is does the Yuhu V2 get about as fast as the dayan pro after significant break in, or is there something else I am missing?(I am not great at megaminx, but I average 1:25)
Quick question I'm in need of a new 5x5 The Hong is half the price of the gan so I'm leaning towards the Hong Do you recommend it over the gan Do you think the performance is similar?
the performance is similar but they're very different cubes. the hong is stable and controllable, whereas the gan feels like if you took a gan 3x3 and turned it into a 5x5. if you like gan 3x3s you might prefer the gan 5 more
@@JavaCuber ok cool thanks I prefer more stable cubes and I hate gan 3x3s for some reason so according to your advice I should like the Hong better Thanks 🔥🔥
@@sofiamn_05 that's fair And while I think that the gan could be better for me then the Hong the price difference is a big deal for me right now so I think the Hong will be the better option for right now Worst comes to worst I will make a plan to get the gan but I will unfortunately have to stick to the Hong right now Thanks tho
![My Main Speedcubes [2021]](/img/1.gif)
"Except fmc and mbld" - said person, who has 20/22 and 21 single with 23.67 mean
I thought he meant as in he can’t show mains cause like you don’t have an fmc main
@@Anthony_JiangI have an fmc main 😅
Nah idk what you’re talking about I have a GAN pen (unreleased) with maglev ballcore and repelling edge magnets
Someone did no cube fmc ffs
I didn’t realise how good of an all-rounder you were until I checked SOR/Kinch and saw how high your name was
Totally agree with your 4x4 and 5x5 choices, so going to go with your picks for 6x6 and 7x7. I just recently got into 4x4 and 5x5, so don’t have a 6x6 or 7x7 yet.
Short and Comprehensive thank you
5:14 java just predicting the future
Square 1 arc when?
never 😔
sq-1 is so cool!!!!1!!1!11!!!1
square-1 is cool!!!
Squan is!
I have a suggestion for you for pyraminx. You can try the yuxin little magic, because it's similar to the bell V1, is very cheap and has better performance imo. Hope this helps!
The little magic is great, but is kinda a luck or bad luck kinda thing. Yuxin change the plastic on the newer batches, so is only worth getting if you can find the old batch.
Good choices. I also prefer the Hong over the GAN 5x5.
Good to know! I'm gonna try both and try and use them as my main. Though I have high expectations on the hong
I saw the video thumbnail in my recommendation and I was like ‘Is that JPerm ?’
for 6x6/7x7, the meilong v2s are comparible
Agree, especially the Meilong v2 7x7.
oh yes i forgot about those
4:07 not too surprising since many world class OH solvers use it
I also use it because I use roux
Java, can you try doing mini Guildford on cam?
idk why i felt like mentioning this but we share 4 mains (v5, vin 4, qy clock, mgc sq1)
PLEASE MAKE SOLVES AND TURNING REVIEW VIDEO! and which 6x6 do you recommend 🤔
aoshi wrm is by far the best 2:48
W music choice, Mario galaxy has the best soundtrack
What's the name of the music played when showing your pyraminx?
I have a question that I have been wondering for quite a while. When I got my Yuhu V2, it was terribly slow out of the box, and I was mourning my 13$, although pretty soon after break in it was good. After a few more months with it, I got the Dayan pro, and was straight away amazed by it out of the box, because it was so much faster than the Yuhu V2. So is does the Yuhu V2 get about as fast as the dayan pro after significant break in, or is there something else I am missing?(I am not great at megaminx, but I average 1:25)
the yuhu needs to be lubed with fast lube
Also loosening it if you'd like to take the time.
id like to be all rounder, but i struggle with big cubes. Any tips?
just a lot of time and practice tbh
Qiyi hong instead of gan 562M. Any reason?
i can't adjust to the turning of the gan 5x5
Is the Gan 562 5x5 your main one?
i prefer the hong
Very nice video!
If you want to try a good pyarminx buy the welong pyarminx with a magnetic core from the cubicle but they are separate
sadly, he is sponsored by scs
Oh ok
@@ClockSolverwdym sadly?
What do you avg for each cube
For clock I use this thing
Should they make a budget clock for like $15
that would be nice
Only clicked because of that cool ass clock
Bud casually getting good at a event
….. quits the event
How are your hands so small???
can you show us some of the setups? My YuHu V2 is really slow, and i'd wanna see the NxN setups.
clean your cube and adjusting compression to the tightest but have enough corner cutting.and for lubing,angstrom lubes will working good for any cube!
i don't think i'll make a video just on setups, but my yuhu has lunar+martian+stardust, and big cubes are usually just lunar
@@JavaCuber ok thanks
@@chuanyundai-bx7op thanks. forgot to say i’m a cubicle kid
Yo can you compare the guhong v3 and the rs3m 2020.btw just subscribe love your content😊
How many solve do u need to do on the aoshi to make it polished
i think mine has less than 500
@@JavaCuber oh no that gonna take me a week without practice any others event 🤣😂
what springs did you use? could you link?
i had an extra super v1 laying around so i used its springs
how do you setup the rs3m v5
If you don't see the link it's his 5th latest short so far
Im glad there is another all rounder that is really good at 3x3 (not me luke garret)
i am not really good at 3x3 (yet)
@@JavaCuber 7.52 average. That's insane
@@Sharkcuberthat's a couple tiers below world class. Very very good, but still not luke garret level. Nowadays a lot of people are at that speed.
@@sofiamn_05 fair
what springs do you use for the v5?
super v1
@@JavaCubersuper v1 bros java edition
When gan 5x5x5 unboxing? And Nice video
i'm not going to get a gan 5
What are your mains for mbld?
Also I tried to use your 3-style trainer and it gave me an error, can you pls help me with that?
use 3styletrainer.xyz it’s better
Cool
I'm curios. What do you use for multiblind?
i have some ylms and meilongs that are specifically for mbld + whatever else i happen to have
@@JavaCuber Thanks a lot
People need to know my pyraminx main. I will also make a mains video
fr i'd watch it
Clock
The qiyi one
Quick question
I'm in need of a new 5x5
The Hong is half the price of the gan so I'm leaning towards the Hong
Do you recommend it over the gan
Do you think the performance is similar?
the performance is similar but they're very different cubes. the hong is stable and controllable, whereas the gan feels like if you took a gan 3x3 and turned it into a 5x5. if you like gan 3x3s you might prefer the gan 5 more
@@JavaCuber ok cool thanks
I prefer more stable cubes and I hate gan 3x3s for some reason so according to your advice I should like the Hong better
Thanks 🔥🔥
@@osmanbadroodin3215do take into account that your needs and preferences in a 5x5 could be different from those in a 3x3
@@sofiamn_05 that's fair
And while I think that the gan could be better for me then the Hong the price difference is a big deal for me right now so I think the Hong will be the better option for right now
Worst comes to worst I will make a plan to get the gan but I will unfortunately have to stick to the Hong right now
Thanks tho
hello
Coo
what is this music 💀
you didn't cover FMc
multi blind blind
0:09 top left
FMC doesn't matter and mbld is either the same as 3bld or anything
hai java
Hong > Gan fr
just erase the vin logo
i’m too slow for it to matter lol
first? 0_0
Jesus loves us all
how is this related to the video
@@lFishyyGMD it isnt
@@wanniesup then why did you comment it
@@lFishyyGMD bc i wanna