I love iwata spray guns I have 3 lph80 and 2 lph300 and 1 w400 and 1 lph 400 hopping to get the supernova someday. Buy with confidence they all spray great I’ve been spraying with iwata 15yrs and they hold up great.
Using a down draft you always start at the bottom of panel and work UP and let the OVERSPRAY fall on wet product , start at the top and you have dry ass overspray you are spraying over and it looks like you painted over sand , been and PPG Automotive refinish tech for 44 years and no matter what type booth you are in you always let your over spray land on WET product so you dont have a dry ass paint job! Been using Iwata for over 20 years now , and they all served me well. Great guns! I tested the SuperNova's a year before they were put in to production ( wonderful guns) and gave my input, only one thing I didnt like is they could have downsized the gun 25% for my small hands as I never switched to them from my W-400 's and my LPH-400's they are just easier to use!
Fresh channel. 150th subscriber. Thank you for this very informative content, though i dont have any of these guns, hopefully i can afford this guns in the future. From 🇵🇭
The room is clean, white and clear to see everything. The setup is excellent, lots of space to move around properly. The instructor is bang on with the explanations and I appreciate it so much!
22degC sounds bang on but 45% humidity seems high. I would also be careful about speaking loudly and directly at the panel like that as spittle could be an issue. My $.02.
All mixed by scale and to manufacturer TDS. Base coat = 20-30 seconds DIN cup no. 4 at 20°C. Clear coat = 15-17 seconds DIN Cup 4 at 20°C Thanks Anest Iwata Refinish
Split Nozzle Tecnology!! WOW!! Look, I'm a fan of Iwata guns. I have a few. I paint professionally. I hope this will come as constructive criticism. The video is called "How to...." and after a long intro of work prep you go immediately to "Split nozzle..." (with no definition or introduction) ...cool. A novice will have no idea what you're talking about. Is this a training vid on application? or is it an introduction vid on fancy Iwata nozzles and gun tech? I appreciate the enthusicdam and the tech and Iwata, but ????
Awesome video but unfortunately we production painters, have to save All the material we can as possible... Hes an excellent painter, would he do things different, yes always!!
People think painting is just put the paint in the gun and go for it.for some that may be true-but when you delve into it on a technical basis-there are so many variables involved in the craft..I have 4 Iwata SuperNova Guns and absolutely love them.I really enjoyed this video..very well done.Thankyou
I can tell u from experience I been to one of those training centers when the instructor had the perfect conditions inside the booth there was still orange peel in paint and clear he was a pro I do not know that but if u got the talent u can still get a good paint job from a conventional spray gun it's not the gun it's the painters technique and experience yhea gun will help to but if u have a 1000 gun and painters Inexpierenced u know the results
1st time i used the gun it was a water hose runs every where. Did you reduce wth activator ? by how much. Also my settings were ,Bottom wide open/trigger wide open and fan 3.5 out from closed fort he fluid.29 psi looks like you move way faster than i did.
Everyone seems so busy looking at the gun, or the technique, or the painted panels I always look for how much mist is in the room. I factor room size and how fast the mist is moving (ie this shows the power off the extraction fans) All that said, Boy was there a huge amount off air borne mist in that booth for what are only two doors
Hi, great video. I build scale models and I use Iwata miniature spray guns. I found this very informative. Please keep the tutorials coming. I wouldn't mind watching a very detailed one!
This video tutorial really helped me, especially in terms of the function of each spraygun, along with the technique of how to apply it. 👍👍👍Thank you, ....greetings from people 🇮🇩🇮🇩🇮🇩
Greetings from Donetsk! Thank you for the colors of the Ukrainian flag! I have more than five years of lph400 for base(it is slightly slower, but more economical than LS and works perfectly at 1.1 bar) and ws400 for clear. Ивата рулит))
Hi there. On the basecoat stage the text said the fan was fully open . Is this true because I've never heard of any supernova user using full fan. To be fair I've never tried it either. Always had my fan screwed all the way in and 2.5 turns out.
I've never heard any supernova user to ever run full fan either due to tendency for top and bottom heavy. However your fan looks very even in the video in the demonstration.. odd.
Many variables could make a pattern have a heavy top and bottom. Wrong pressure... Wrong set up for the paint system in use... Gun maintenance... Humidity and temperature... The list goes on! We often hear about users tweaking fan and fluid, Every painter is different. We actively encourage the discussion on gun performance as this helps us improve our products and services!!
Не согласен, факел с акцентированым центральным пятном лучше дает покрытие базы при перекрытии 50 процентов. Не люблю на базе I факел. With base I pattern has problems and spotting effect, it s obvious.
good video,very imformative.i have two iwatas 1.4 w400 and this always worked very well with damondclass anti scratch clear and a 1.3 wbx bellaria ,which always seemed to work v well with solvent basecoats.really like anest guns.moved on a long way from devilbiss jga 43 aircap @60 psi.
Well said. Very nice,no bull,comprehensive, strait "shooter" lol. And on top of that panels look great, even spraying them with the wrong hand! Hahaha🤘
My problem with most guns and these are in that category is, nice wide pattern, has to overlap 90% down the panel to make it wet. The need for anything more than. 15-20% overlap negates wide fan claims.
@@jondoe4667 if you paint jamb first any overspray from jamb lands on main surface. That overspray causes irregular surface tension for the paint to land on when you transfer to main surface. Possibly effecting how it lays down or metallic/Pearl orientation. If you spray main surface first and then switch to jamb any overspray from jamb will land on an already wet bed/surface and melt in flawless. This comes into play even more so when spraying tri stage coats.
I watch your videos I wish I could understand them! Captions are in Russian too 😞 what don you think of the new kiwami guns you buse them alot. I can't understand if you like them or not
@@richmondprofinishes Hello! It is very pleasant that they answered! The new Kiwami is certainly better than the previous W400, unfortunately I have little quality information from the manufacturer about how the models differ from the old version. There is a technical part, but not specifically for spraying. It is clear that it is better and faster, but how it works is not) I think in Russia there are very few really good specialists who know the question as well as you, so I turned to you with a request to allow you to translate your video into Russian, I am not as literate as you ... Captions - subtitles can be translated and they will be displayed in English, for this video you need to watch on a computer, not on a smartphone and in the settings for the video, click the translate button and indicate which language. And with the WIEDER series, nothing is clear at all, what is the difference with Kiwami
Hi great video. I have borrowed a ws400 of a friend as I am thinking of buying one. I have noticed it flutters as I'm painting. It doesn't affect the finish but I'm finding it a bit weird. is this normal? 🇦🇺
This could be the nozzle make sure it is tightened correctly. If issues continue you may need a new nozzle/needle set. it may also be worth checking there is no residue and give everything a thorough clean. Thanks Anest Iwata Refinish!
This video is just what I've been looking for--and it comes from Iwata themselves!. I would like to know what face mask the instructor was using in the video, as I also wear eye spectacles.
Can you tell me what is the actual nozzel size in mm on the W400 LV WBX 1.4. I have A W77 with fluid tip N°22 which is supposed to be 2mm and actually is 1.7mm and a old Wider 85 11S and it says 1.4 on the box and is actual 1.1mm. I need to buy a new gun and am a bit worried about the fluid tip sizes. All the manufactures seem to lie about the fluid tip sizes.
Hi i just bought the ATZ hte 1.8 and 1.3 for 1k primer, base and clear coat, i saw a few bad comments on this gun, can you please comment on it and advise thanks. I will be spraying black in a garage. Thanks
Worked at a shop recently, clowns were priming 180 grit with rattle cans then straight into the booth Many 20 cars were murdered I was done with that place in 2 weeks
Ótimo video muito bom , só poderia ter legenda em português , tenho 4 w400 belaria e 1 w400 wbx 1.3 , espero poder ver mais vídeos assim , o seu foi o melhor obrigado
I’m not a painter but I want to paint my motorcycle myself, I’ve been watching videos for a year now and trying to learn as much as I can , I’ve learned a lot from your video, thanks
I must admit your awesome ! A scientist. You have to keep making videos like this,like a real heavy course silver paint instruction video ,that gun might work for me!, thank you!
It’s cheap as hell considering the air fed respirator and associated hardware he is using will be 5k minimum. Also look at paper he is using to do the spray pattern tests! Looks expensive!
Why do companies want to sell you a different gun for every kind of paint? If you know what you're doing, you can do it all with 1 gun (plus a mini gun) and a few different tips/caps. Maybe I'll use a cheap gun for primer if i know I'm going to sand anyway.
...paint is a fluid, and when it comes to spraying it, the only real factor is its viscosity. Viscosity is addressed by tip/cap size (including cap air hole size) and air pressure. You don't need multiple guns to achieve this.
I have (2) Iwata guns- both are W-400 Bellaria /classic-1 has a 1.2 tip the other has a 1.3 tip is it possible to purchase the W-400 WBX AIR CAP&1.3 TIP FOR LAYING DOWN WET ON WET PRIMER??-thank you, PATRICK.P
This guy clearly knows what he is doing, Awesome amount of knowledge, Thank you so much 💖
I love iwata spray guns I have 3 lph80 and 2 lph300 and 1 w400 and 1 lph 400 hopping to get the supernova someday. Buy with confidence they all spray great I’ve been spraying with iwata 15yrs and they hold up great.
Hoping to get a supernova? The lph 80 costs just as much haha
Thank you for the video tech tips now I know more about the clear gun can’t wait to use it in the booth
Using a down draft you always start at the bottom of panel and work UP and let the OVERSPRAY fall on wet product , start at the top and you have dry ass overspray you are spraying over and it looks like you painted over sand , been and PPG Automotive refinish tech for 44 years and no matter what type booth you are in you always let your over spray land on WET product so you dont have a dry ass paint job!
Been using Iwata for over 20 years now , and they all served me well.
Great guns!
I tested the SuperNova's a year before they were put in to production ( wonderful guns) and gave my input, only one thing I didnt like is they could have downsized the gun 25% for my small hands as I never switched to them from my W-400 's and my LPH-400's they are just easier to use!
Fresh channel. 150th subscriber. Thank you for this very informative content, though i dont have any of these guns, hopefully i can afford this guns in the future. From 🇵🇭
The room is clean, white and clear to see everything. The setup is excellent, lots of space to move around properly. The instructor is bang on with the explanations and I appreciate it so much!
nice video Sir.nice work..from philippines.keep safe Sir
22degC sounds bang on but 45% humidity seems high. I would also be careful about speaking loudly and directly at the panel like that as spittle could be an issue. My $.02.
I like the paint suit
Our coveralls are available to buy! check with your local distributor to find out more!
Where can I purchase this guns? Information will be greatly appreciate it! I’m in NYC
What viscosity of material did you have?
All mixed by scale and to manufacturer TDS.
Base coat = 20-30 seconds DIN cup no. 4 at 20°C.
Clear coat = 15-17 seconds DIN Cup 4 at 20°C
Thanks Anest Iwata Refinish
what are the ratios for wet to wet primer , basecoat and clear coat?
All mixed by scales.
Hi, LS 400 entech 1.2 et, is good for clear?
You would preferably want WS-400!
Split Nozzle Tecnology!! WOW!!
Look, I'm a fan of Iwata guns. I have a few. I paint professionally. I hope this will come as constructive criticism. The video is called "How to...." and after a long intro of work prep you go immediately to "Split nozzle..." (with no definition or introduction) ...cool. A novice will have no idea what you're talking about. Is this a training vid on application? or is it an introduction vid on fancy Iwata nozzles and gun tech? I appreciate the enthusicdam and the tech and Iwata, but ????
Awesome video but unfortunately we production painters, have to save All the material we can as possible...
Hes an excellent painter, would he do things different, yes always!!
He should be painting bottom to top. Much easier to see what your doing. I hate these iwata guns. Their airbrushes are the best though.
Why are all these you tube trainers always left handed!? 🤣
Too expensive and many guns out there that can do as well if not better in the right hands.
Other guns may do a good job but better? I highly doubt it!!!
I couldn’t. Expensive outlay, but well worth it. So worth it I’ve purchased more iwata expensive spray guns.
People think painting is just put the paint in the gun and go for it.for some that may be true-but when you delve into it on a technical basis-there are so many variables involved in the craft..I have 4 Iwata SuperNova Guns and absolutely love them.I really enjoyed this video..very well done.Thankyou
Yep so little emphasis is put on good spray guns. I myself have a supernova, and I never could get a finish I do now with my other cheaper guns.
Why would you need 4 super novas? Just wondering. Like 2 for the shop and 2 for home?lol
@@sphdg my mate retired from painting/so basically gave me his two-and I already had two..
@@falcon0351 sweet! Do you run them all the same fluid size?
I can tell u from experience I been to one of those training centers when the instructor had the perfect conditions inside the booth there was still orange peel in paint and clear he was a pro I do not know that but if u got the talent u can still get a good paint job from a conventional spray gun it's not the gun it's the painters technique and experience yhea gun will help to but if u have a 1000 gun and painters Inexpierenced u know the results
1st time i used the gun it was a water hose runs every where. Did you reduce wth activator ? by how much. Also my settings were ,Bottom wide open/trigger wide open and fan 3.5 out from closed fort he fluid.29 psi looks like you move way faster than i did.
Everyone seems so busy looking at the gun, or the technique, or the painted panels
I always look for how much mist is in the room.
I factor room size and how fast the mist is moving (ie this shows the power off the extraction fans)
All that said,
Boy was there a huge amount off air borne mist in that booth for what are only two doors
Hi, great video. I build scale models and I use Iwata miniature spray guns. I found this very informative. Please keep the tutorials coming. I wouldn't mind watching a very detailed one!
live that mini gun
This video tutorial really helped me, especially in terms of the function of each spraygun, along with the technique of how to apply it. 👍👍👍Thank you, ....greetings from people 🇮🇩🇮🇩🇮🇩
That's great to hear. Thanks for watching!!
Great vid. I am using your guns foor wood and pvc refinishing but i find i still picked bits up from this. Your guns are the best btw! 👌
That's good to hear. Thanks for watching!!!
Very professional and comprehensive video, looking forward to many more from Iwata UK.
Greetings from Donetsk! Thank you for the colors of the Ukrainian flag! I have more than five years of lph400 for base(it is slightly slower, but more economical than LS and works perfectly at 1.1 bar) and ws400 for clear. Ивата рулит))
Приветствую вас ✌️🇺🇦
donetsk part of Russian flag,
Very good Brasil 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Só faltou habilitar a legenda português Brasil 🇧🇷 e outras línguas obrigado 👍
Habilita no celular. Simbolo engrenagem. Legendas tradução automática português...
@@ednofelipevieira1456
Obrigado, consegui 👍🇧🇷✌️
Hi there. On the basecoat stage the text said the fan was fully open . Is this true because I've never heard of any supernova user using full fan. To be fair I've never tried it either. Always had my fan screwed all the way in and 2.5 turns out.
Hello, Yep fan and fluid fully open! I'm sure we will elaborate further in future videos about settings and set ups!
@@AnestIwataRefinish thanks . I will give it a go 👍🏻
Me too
I've never heard any supernova user to ever run full fan either due to tendency for top and bottom heavy. However your fan looks very even in the video in the demonstration.. odd.
Many variables could make a pattern have a heavy top and bottom. Wrong pressure... Wrong set up for the paint system in use... Gun maintenance... Humidity and temperature... The list goes on! We often hear about users tweaking fan and fluid, Every painter is different. We actively encourage the discussion on gun performance as this helps us improve our products and services!!
Не согласен, факел с акцентированым центральным пятном лучше дает покрытие базы при перекрытии 50 процентов. Не люблю на базе I факел. With base I pattern has problems and spotting effect, it s obvious.
good video,very imformative.i have two iwatas 1.4 w400 and this always worked very well with damondclass anti scratch clear and a 1.3 wbx bellaria ,which always seemed to work v well with solvent basecoats.really like anest guns.moved on a long way from devilbiss jga 43 aircap @60 psi.
Well said. Very nice,no bull,comprehensive, strait "shooter" lol.
And on top of that panels look great, even spraying them with the wrong hand! Hahaha🤘
Nice to finally see Iwata UK on RUclips, very informative video keep up the good work.
About time right? Haha. Thanks for watching!!
Spot on that well explained thanks with the settings helps a lot off people out who are just trying to learn out to paint
Glad we could help!
My problem with most guns and these are in that category is, nice wide pattern, has to overlap 90% down the panel to make it wet. The need for anything more than. 15-20% overlap negates wide fan claims.
This is really a great video hope to see more from Iwata
Never paint jamb first. Always outside then jamb
What is the reason for painting jam last?
@@jondoe4667 if you paint jamb first any overspray from jamb lands on main surface. That overspray causes irregular surface tension for the paint to land on when you transfer to main surface. Possibly effecting how it lays down or metallic/Pearl orientation.
If you spray main surface first and then switch to jamb any overspray from jamb will land on an already wet bed/surface and melt in flawless. This comes into play even more so when spraying tri stage coats.
@@full_metal2452 makes sense. Thanks for explaining.
Yes I would like to see the hot dry ETS setup, because I'm in a hot dry climate
What nozzle size on the W400 for the wet on wet ?
Hello, can I use your video on my channel, I want to translate your video into Russian for my viewers who want to know better about IWATA
I watch your videos I wish I could understand them! Captions are in Russian too 😞 what don you think of the new kiwami guns you buse them alot. I can't understand if you like them or not
@@richmondprofinishes Hello! It is very pleasant that they answered! The new Kiwami is certainly better than the previous W400, unfortunately I have little quality information from the manufacturer about how the models differ from the old version. There is a technical part, but not specifically for spraying. It is clear that it is better and faster, but how it works is not) I think in Russia there are very few really good specialists who know the question as well as you, so I turned to you with a request to allow you to translate your video into Russian, I am not as literate as you ... Captions - subtitles can be translated and they will be displayed in English, for this video you need to watch on a computer, not on a smartphone and in the settings for the video, click the translate button and indicate which language. And with the WIEDER series, nothing is clear at all, what is the difference with Kiwami
@@richmondprofinishes Hello, so can I post your videos on my channel?
@@красимправильно absolutely 💯 👌.
@@красимправильно у Яндекс- браузера есть закадровый перевод иностранных видео. Может кому пригодится...
شكرا على مشاركة الفيديو فقط كان من الأحسن توضيح نوع الألوان المستعملة في الرش
Excellent! Now I have to check how much these guns cost.
Hi great video.
I have borrowed a ws400 of a friend as I am thinking of buying one.
I have noticed it flutters as I'm painting.
It doesn't affect the finish but I'm finding it a bit weird.
is this normal? 🇦🇺
This could be the nozzle make sure it is tightened correctly. If issues continue you may need a new nozzle/needle set.
it may also be worth checking there is no residue and give everything a thorough clean.
Thanks Anest Iwata Refinish!
What is the price on these guns ?
This video is just what I've been looking for--and it comes from Iwata themselves!. I would like to know what face mask the instructor was using in the video, as I also wear eye spectacles.
In the video, we are using the 2020 Airfed mask. On our website we have more information: www.anest-iwata-coating.com/en/air-fed-mask-2020/
@@AnestIwataRefinish thank you
Yo tengo una d esas fantástico el acabado exelente herramienra para pintar
Can you tell me what is the actual nozzel size in mm on the W400 LV WBX 1.4. I have A W77 with fluid tip N°22 which is supposed to be 2mm and actually is 1.7mm and a old Wider 85 11S and it says 1.4 on the box and is actual 1.1mm. I need to buy a new gun and am a bit worried about the fluid tip sizes. All the manufactures seem to lie about the fluid tip sizes.
Hi i just bought the ATZ hte 1.8 and 1.3 for 1k primer, base and clear coat, i saw a few bad comments on this gun, can you please comment on it and advise thanks. I will be spraying black in a garage. Thanks
WOW superb,
i love Iwata Guns.
Worked at a shop recently, clowns were priming 180 grit with rattle cans then straight into the booth
Many 20 cars were murdered
I was done with that place in 2 weeks
Not nice teaching teach them easily
Is the bes anest iwata good i like thanks
I just purchased a LS and WS 400 Supernova for Base and Clear Coat. What overlap % would you recommend for metallic to avoid Tigerstripes
Try 75% overlap, also do a "cross hatch" patern
вы помешены на украине походу
I spray outside, the conditions change minute to minute. Hope it doesn’t rain and get to gusty.
Ótimo video muito bom , só poderia ter legenda em português , tenho 4 w400 belaria e 1 w400 wbx 1.3 , espero poder ver mais vídeos assim , o seu foi o melhor obrigado
Ws 400 1.3 HD
I like it
Great info many thanks
So which exact model of the ws400 are you using. This is not a HVLP model correct? Do the make a 1.8 nozzle for the ws400 for primer?
Correct, in this video we are using the WS-400 Clear! LS-400 is HVLP! On WS we only go up a 1.5hd.
Excellent work! 🖖🏻
Thank you! There's more to come!!
Amazing results! These guns are making wonderful job. I wish I had them. Do you sell some of these used guns perchance?
We do not currently supply any used guns, depending on where you are located talk to your local distributor and they should be able to help!
I’m not a painter but I want to paint my motorcycle myself, I’ve been watching videos for a year now and trying to learn as much as I can , I’ve learned a lot from your video, thanks
Thanks for the reply - we're glad you found value in this video. Check out the rest of the channel for different topics!
Which one of this would be best for spraying lacquer on wood cabinets? And where can I buy it in the US?
Your best option would be the WS-400!
Do you provide any hands-on training in the USA on your guns?
👍👍👍
GOOD
Un saludo desde patagonia argentina gracias
Holy loosing half of the material out the gun with to high pressure. Looks good if you want to spend double on paint!
In all of our videos we follow the correct TDS sheets provided by every paint brand!
Love this video!!! Awesome explanation!!
Epa guidelines is another thing itself
I must admit your awesome ! A scientist. You have to keep making videos like this,like a real heavy course silver paint instruction video ,that gun might work for me!, thank you!
More videos to come on a range of different topics! Thanks for watching!!
I love the spray wid nova
More Video
More coming soon! Thanks
HV & HP & LV = air or paint?
عمل رائع...
That gun same price for my scooteer 🛵 😅
It’s cheap as hell considering the air fed respirator and associated hardware he is using will be 5k minimum. Also look at paper he is using to do the spray pattern tests! Looks expensive!
My faves
Why do companies want to sell you a different gun for every kind of paint? If you know what you're doing, you can do it all with 1 gun (plus a mini gun) and a few different tips/caps. Maybe I'll use a cheap gun for primer if i know I'm going to sand anyway.
...paint is a fluid, and when it comes to spraying it, the only real factor is its viscosity. Viscosity is addressed by tip/cap size (including cap air hole size) and air pressure. You don't need multiple guns to achieve this.
When you’re a simpleton, everything looks simple.
@reefhog Apparently, when you're a simpleton, everything looks simple when you just throw money at it.
@@nicholash8021 You’re telling the story, simpleton.
@@reefhog Maybe you can provide some insight instead of ad hominem.
howdy,what psi on clear?
26
What is a bar equal to?
1.0 bar is the same as 14.5 psi. 2.0 bar = 29 psi.
How much?
Prices will vary depending on where you are based! We'd recommend contacting your local sales branch for any support you may require!
I have (2) Iwata guns- both are W-400 Bellaria /classic-1 has a 1.2 tip the other has a 1.3 tip is it possible to purchase the W-400 WBX AIR CAP&1.3 TIP FOR LAYING DOWN WET ON WET PRIMER??-thank you, PATRICK.P
Hi! sorry for the late reply, Yes you should be able to purchase the WBX air cap and nozzle from one of your local distributors!!
very enthusiastic about split-nozzle technology
Always!