За километры приходится платить весом аккумуляторов. Но то что у вас мотороллер а не велосипед как база - очень хорошо. Успехов! У вас очень интересный канал.
Don't put your balance leads directly over the tin. If any of those balance leads gets a short due to vibration over time, boooom. Use some fish paper between the leads and the tin.
can you explain what's going on with the bms wiring? Looks like you're connecting wires to the negative and positive of every other cell instead of just to the positive on each cell? Ive never seen this before and im a little confused, im going to be building a similar battery soon and would like some clarity on that. Thank in advance. also love what you did with the clear plastic looks awesome!
@@SRNAR8 copper allows more current to flow than nickel. Why use copper for only one series connections if none if the other series connections have copper also.
You really should check the pack with a thermal heat gun after a hard day of riding because those interconnects are probably handling a fair bit of current. What does your controller pull? What cells are you using?
Can you please add some protection to your battery? Any dirt debree put up by your tire may damage the battery potentially start a fire. You don't want to do anything with lithium ion batteries catching on fire. 5mm plastic on front and 3mm everywhere else. And seal it from water.
Да не надо ничего мерить ни ёмкость ни сопртивлению, это делается в этих российских видеах потому что качество банок аховое, и тот что тратят кучу часов своего времени не делает их ни сколько лучше. тут конечно банки из гадюшиника тоже
Lupet idol!di na maarok ng utak ko yung battery connection😀.Good job sir!👏
parang 12v lng yn.. dumami lang.. haha
@@albertnario4877 grabe dami sir.sana all marunong maka pag build pangarap ko yan kaya bumili nako mumurahing spot welder sa shopee.😀
basic lang sayo yn.. haha.. kayang kaya..
@@albertnario4877 kung malapit ka lang pinatira ko na sayo tong hub motor ko.hanggang ngaun di ko parin nagagawa.hahaha😂
Great job! Impressive to see someone willing to go through what you do. Loved seeing you power using the same pack you did
За километры приходится платить весом аккумуляторов.
Но то что у вас мотороллер а не велосипед как база - очень хорошо.
Успехов!
У вас очень интересный канал.
Крутой сварочник для своих размеров, прямо сквозь медную фольгу варит!
Nice! Ref magnet pala maganda pang assist habang nag spot weld. Salamat sa idea.
haha,. sakto lng dn lakas nung magnet..
Don't put your balance leads directly over the tin. If any of those balance leads gets a short due to vibration over time, boooom. Use some fish paper between the leads and the tin.
yes, your right.. just realized it while editing this video.. 😅
@@albertnario4877 did you fix it????? Be safe bro!! We love your work
@@albertnario4877 di sz bateri 48v
Nice dude, could you explain what you did with the imax and the tricks for charging all parallel please ?
Scary AF removing those old welds hahaha
tlga haha..
can you explain what's going on with the bms wiring? Looks like you're connecting wires to the negative and positive of every other cell instead of just to the positive on each cell? Ive never seen this before and im a little confused, im going to be building a similar battery soon and would like some clarity on that. Thank in advance. also love what you did with the clear plastic looks awesome!
Ang galing mo sir. Thank you for sharing this. Pwede po ba magpagawa ng battery sa inyo?
Dami naman ng Battery 😯 sana all
how come you didnt do capacity checks on the batteries, looks like you just read voltages?
I've always loved your videos. please make the most powerful electric bike with 72v battery and bafang motor.
when I got fund for that.. thanks for support.. 😁👍
You only used copper for the series connection between the two halves of your pack. What about all the other series connections
he used 0.15 mm nickel strips, go watch the video again
@@SRNAR8 copper allows more current to flow than nickel. Why use copper for only one series connections if none if the other series connections have copper also.
@@MotoAlias it is prolly what he had on hand
@@MotoAlias he don’t have Amazon same or next day delivery nor the $$$$ for that I bet
That strip clearly says 0.1mm not 0.15mm. 0.1mm nickel plated steel has pretty much no current carrying capacity beyond a few amps.
You really should check the pack with a thermal heat gun after a hard day of riding because those interconnects are probably handling a fair bit of current. What does your controller pull? What cells are you using?
grabe anlayo ! 😍
Where did you get the BMS ?
online shops..
CAn you do a test with higher speed?
I make more video like this.. thanks
Can you build me a custom battery for my razor mx650 72v
Only kapton tape is missing✌🏼
Can you please add some protection to your battery?
Any dirt debree put up by your tire may damage the battery potentially start a fire.
You don't want to do anything with lithium ion batteries catching on fire.
5mm plastic on front and 3mm everywhere else. And seal it from water.
saan store ka bumibili ng batteries, controller, BMS etc sir?
Sakto 72v ebike ko ah. Dinodonate m nba sa mahihirap yan?
sunod nlng pag mayaman n tyo 😅
а замер ёмкости и сопротивления ?
Да не надо ничего мерить ни ёмкость ни сопртивлению, это делается в этих российских видеах потому что качество банок аховое, и тот что тратят кучу часов своего времени не делает их ни сколько лучше. тут конечно банки из гадюшиника тоже
Nice video, thanks for sharing :)
Lods tanung lang magkano ang one PCs Ng ganang 18650???
depende start 120 isa,
@@albertnario4877 San nakakabili lods Ang mamahal dto 700 dalawa
Cool video bro.
Mantul
its insane power its ok i know cool one but just not safe.....
Baka po pwd paturo idol, baka pwd nyu po akong gawing apprentice hehee
RUclips University
Tên app map Bạn dùng là gì vậy, map ???
Pwede bang magpagawa sayo? Syempre babayaran ko
pwede kuya sayo partsmura lang labor ko... 👍
sir ako din po pagagawa.
Nice
💯💯💯
👌🏿
.
Ĺ
u didnt tested back wtf????? U INSAIN????!!!!;
bad really really bad....