If you're having trouble with the part numbers you can go to the dealer and get the exact part numbers for you car with the VIN, you can also get a list of parts from them and making it easier to look for them on the web since you are gonna know what exact part you are looking for, another thing, you should start looking for parts in the EU cause they're are much cheaper venders then in the US, and last, you could also look for the parts in scrap yards in LA and SD areas, we never had a shortage of high end car parts specially in SD the only down side is that you gotta call and ask because a lot of the places don't post their parts on the internet, best of luck man really looking forward in seeing the finished product 😁😁😁
Hi Tim, You’d hit the lotto if your garage burned down and you collected insurance on the Lamborghini. Second best is unloading the car and buying a frame machine for your new shop.
Every rubber or plastic o-ring, gasket, hose, vaccum line needs replacing on that engine. You do great work, but I think this thing is just too far gone to make it a worthwhile rebuild
Slap a S58 From a G80 on it. It would be a rear engine setup and they’re lighter than G80s but with the same motor and all wheel drive. Car would be a drag monster
i can tell you right now, it's going to cost you just as much to replace all these bad parts, as it would to just buy a whole car !. your best bet ?, buy a part out car, strip it, use those parts, will be cheaper. on a side note, no way in heck would i take this project on !..lol.
Dude, you can reconstruct your damaged harness by replacing the damaged wires and the plastic terminals. Use All-Data to download the wiring diagram and the pinouts, and read the S/N of the connectors to buy them. It will not cost you more than 500 USD. I know it's pain in the butt and will take time, but you need to save money and built the harness yourself.
I have been waiting patiently for this episode. I wonder if I will ever had to fix a car this expensive, but I just like watching your rebuilds and seeing you fixing all those big cars it’s amazing. Watching All the way from South Africa 🇿🇦 You very funny at times and would like to meet you someday. Keep up the good work. 😊
I would say the only way to swap this car and make it cooler than what it is stock is replacing the v10 with a v12. Maybe that v12 Mercedes motor that the Pagani Zondas share with that cheap E&S 600 from back in the day. If not a Lambo V12 or Ferrari V12 would be super interesting
Hi Tim , Why aren't there any hoody's / shirts on the store? That would make more sense with shipping to Europe...... I know the car is not available but still. Keep it up! 🤙
Wow ! Awsome ! 👍 Man ! you guys are enjoying this gigantic project !, I really appreciate sharing this video on RUclips's .👌 Be blessed, Praying for Ukraine. 🙏
How bad is that harness? Clean it and lay it out. If you got a cheaper harness could you not repair it by splicing parts together / swapping connectors over? It’s not as difficult as it sounds…
Hi there i want to contact you please tell me how I hade accident with my ram 1500 and i am wandering if you could help me to repair it😢,I am from Iraq by the way
Its a Lambo with Audi R8 parts.The airbag on the steering.The V10 also similar to Audi R8 V10.Just a thought because Lamborghini and Audi Are Build by Vw.
5k for some wires. i dont get it. are they made out of gold. whats so expensive about the harnesses? im all for the crazy swap. atleast it will be unique :)
1 like on this comment and I’m not going to give up on this build! 😅
Go get your 20x entry! BackYardBoyz.Store
Ok I’m not giving up 😁
Some reason I can’t see you giving up 😂
OEM spec Lamborghini is the best way forward
I know it not easy or cheap but if you can I’d defo keep the Lambo engine. These things TT are just awesome! Keep up the awesome content
do a custom wireing hardness it would be cheap
My friend, This lampo is really mess!! Good luck!!
Find a local fabricator to repair the turbo kit like tavarish did with his burnt Gallardo
Don't give up Tim we know your capabilities..... ❤
Bro, we did almost same rebuild on our channel. It took us 60 episodes to rebuild my burnt Gallardo. If you have questions pls contact us! ❤😊
If you're having trouble with the part numbers you can go to the dealer and get the exact part numbers for you car with the VIN, you can also get a list of parts from them and making it easier to look for them on the web since you are gonna know what exact part you are looking for, another thing, you should start looking for parts in the EU cause they're are much cheaper venders then in the US, and last, you could also look for the parts in scrap yards in LA and SD areas, we never had a shortage of high end car parts specially in SD the only down side is that you gotta call and ask because a lot of the places don't post their parts on the internet, best of luck man really looking forward in seeing the finished product 😁😁😁
This series is so interesting, i want to see the result!
Easy, some of the best camera angles/shots, since way back, engine wire search and the seatbelt removal
I’m too invested I need to see this finished! Amazing content
Hi Tim, You’d hit the lotto if your garage burned down and you collected insurance on the Lamborghini. Second best is unloading the car and buying a frame machine for your new shop.
I'd put it on back burner till you get all the parts and get another project for now,we all know your capabilities Tim keep up the great content 👌
Man, it’s about time you put that car out and work on it. I’ve been waiting for it.
Hey quick question what happened to the track m4? Haven’t seen it since you moved to Florida
Dude, crazy swap, mad scientist :)
Think you need a smashed up donor vehicle. Just use the frame, engine, gearbox from your crispy car.
Let's goooo for the Kswap!!!!
Just a fun idea tow it behind a car with a cable and make it look like its driving already.
Could sell it to Matt Armstrong it would be right up his alley 😊
Every rubber or plastic o-ring, gasket, hose, vaccum line needs replacing on that engine. You do great work, but I think this thing is just too far gone to make it a worthwhile rebuild
Two videos in one week bro you are amazing🎉❤
Keep the stock engine dont swap it
Slap a S58 From a G80 on it. It would be a rear engine setup and they’re lighter than G80s but with the same motor and all wheel drive. Car would be a drag monster
It’s all V.A.G Group electrics and running gear - probably easiest swap is with Audi V10 units then “mod it” from there.
Real life, exotics surge might have all the parts you need
Please keep a Lamborghini engine in it. Only engine I’d say swap it with would. Be a lambo v12.
❤
Keep up the good work
16:15 Its the A/C return vent
I have a feeling... This Lamborghini will never run again😂😂😂😂
i can tell you right now, it's going to cost you just as much to replace all these bad parts, as it would to just buy a whole car !. your best bet ?, buy a part out car, strip it, use those parts, will be cheaper. on a side note, no way in heck would i take this project on !..lol.
an e60 V10 would be a crazy never done before swap in this car
Dude, you can reconstruct your damaged harness by replacing the damaged wires and the plastic terminals. Use All-Data to download the wiring diagram and the pinouts, and read the S/N of the connectors to buy them. It will not cost you more than 500 USD. I know it's pain in the butt and will take time, but you need to save money and built the harness yourself.
I have been waiting patiently for this episode. I wonder if I will ever had to fix a car this expensive, but I just like watching your rebuilds and seeing you fixing all those big cars it’s amazing.
Watching All the way from South Africa 🇿🇦
You very funny at times and would like to meet you someday. Keep up the good work. 😊
Oem specialises for sure
You need some Knipex side cutters
DO the crazy swap. Find a wrecked camaro with a 1000hp LS and put that in there.
2jz twin turbo swap! 💥
If you’re going down the swap route, DAZA swap would be awesome to see😎
So some people like us living on Botswana can we enter and stand a chance to win ?
Build it back to OEM spec
Loving the content 💯
V10 TDI swap?
Hi Tim I'm in Zimbabwe i really love your show,how can i buy something from your shop so that i can enter into giveaway of that AMG
Tim go watch B is for build he is putting his lambo spider body on a tesla he may have wiring and other parts you need cheers from down under
This car is toast
and will cost more than it’s worth
The parts cost will be extortionate
Will the car get shipped to sweden for example if the winner lives there?
if u mange to rebuild that u deserve a medal dude.it is truely fucked.coming from an englishman
Prolly should go lambo & deal with the all the custom work
Your videos are getting better and better Tim! Keep up the good work!
You can buy a custom wiring harness for the civex
Bro, it's very funny when you speak Slavic words, I'm from Russia, and to be honest, I really like your content.
Look for a wrecked lambo in Europe, way cheaper and you can just ship it fairly cheap.
i know one scrap in my contry but wht is model ur car ? 2008 ?
So: i bet 1$ the build will be more expensive than buying one in perfect condition 😂
I would say the only way to swap this car and make it cooler than what it is stock is replacing the v10 with a v12. Maybe that v12 Mercedes motor that the Pagani Zondas share with that cheap E&S 600 from back in the day. If not a Lambo V12 or Ferrari V12 would be super interesting
What about people who paid for subscription?
tax exemption shi im not hatin 🔥🔥🤝
I don’t think this car is fixable but we’ll see
Hi Tim , Why aren't there any hoody's / shirts on the store? That would make more sense with shipping to Europe......
I know the car is not available but still.
Keep it up! 🤙
Wow ! Awsome ! 👍
Man ! you guys are enjoying this gigantic project !, I really appreciate sharing this video on RUclips's .👌
Be blessed, Praying for Ukraine. 🙏
How bad is that harness? Clean it and lay it out. If you got a cheaper harness could you not repair it by splicing parts together / swapping connectors over? It’s not as difficult as it sounds…
Hi there i want to contact you please tell me how
I hade accident with my ram 1500 and i am wandering if you could help me to repair it😢,I am from Iraq by the way
LS swap and a painless harness done
A stock Rebuild is best 👌
Why not try looking offshore try hunting around in Australia for some parts
Rebuild it… keeps the essence or the car… any good fabricator can make the pieces thats missing a lot of turbo setups need a lil fab work
Tavarish might know some people
keep engine!!
I’m here for crazy swap
Its a Lambo with Audi R8 parts.The airbag on the steering.The V10 also similar to Audi R8 V10.Just a thought because Lamborghini and Audi Are Build by Vw.
What happened to Insta subs being included in the giveaway?
Put that motor in something 😊
Can we enter the give away if you are not from the states?
To Me!!!! 🎉🎉🎉🎉 Thank you!!!
Channel your inner Tavarish
what do you do with the gold wheels bro? im the guy who sell it to u
nice videos btw
My opinion the simplest way to rebuild this car is to contact a company that parts whole cars, there is a well known one, I forgot its name
Do a crazy swop. It will not be economical to restore this car to original condition....
Bet some of the parts from the Audi v10 S6 are interchangeable ☝️
Best videos
Just part it out
How about a b58 gallardo
Put a viper engine in
i swear this guy's been talking about that giveaway for 4 years
6 years
Wiring harness, look at both audi r8 spyder and gallardo spyder, identical cars under the skin, as you probaby knows 😊
keep the engine
The brunt?
Just put it up in you attic until the right parts car comes online.
If you have just pulled oof the intake plenum you could have go to all those wires.
I’m gonna win that E63 🗣️
What is blud Tim yapping on about ?
You guys are hilarious 😂
I’m sorry, did you say “meth kit tank??” Lol
Unfortunately I did😂
I'd do an chevy 6.2 ls swap and twin turbo charge it . Cheaper, lighter,easier to wire and just as powerful. Can get adapter to mate engine.
5k for some wires. i dont get it. are they made out of gold. whats so expensive about the harnesses? im all for the crazy swap. atleast it will be unique :)
I have a good Idee for you Tim!
Canu enter on the other side of the pond?🤔🤔🇬🇧
if you swap its got to be something wilder than the v10 b58 not gonna cut it
Here!
u should try reach other guys like u , eg Tavarish i think he could help u with some ideas for your electrical problems , best of luck ...