You did a great job on Jim's car we know you will do a great job. This Tim its out in the open which will make it easier. We all know Jolene will do fabulous with the camera work.
Remember as a kid when the junkyards were full of 1930s and 40s cars? I DO !!! Parts were not cheap either! You had to pay 20 bucks if you wanted a whole clip from something like a 37 Chevy.
It was nice to see I’m not the only boy that didn’t have matching shoelaces. Heck sometimes my shoes didn’t even match lol. It was terrible when I had to wear to left foot shoes. Little wonder I walked in circles all the time
This guy has his on show. That's basic cable for ya. They'll do anything for views. This proves my point. Go watch a real mf build real shit. Check out Bellos Customs. This is like polishing turds.
Chad and Jolene, Will you box in the car frame for strength? In addition, will you run stamp beads in the floor panels for added strength? Your sailing on the fly with the fabrication. It's great to watch. Thanks for your dedication and sacrifices. The show is wonderful.
Chad is the master and champion of free hand grinding and cutting. I use to grind on art work for 12 years and this guy is great at free handing a cut. He makes it look easier than it is.
Great work again, it's looking so easy to build a floor in the car,but it still is a piece of masterwork,also great filming again Jolene,also liked the video at the scrapyard,a lot of treasures over there,thanks for sharing
Hey Mr. Love your channel you rock my 11 yr old and I watch all your videos it's awesome showing my boy how to use your head and think outside the box you can do anything I was raised that way didn't have a lot but worked with what I had and could get much love from clarkston washington USA
Cracking on at a fair pace now and moving closer to seeing chassis and body together. Can't wait to see you section the rear wheel wells. Awesome stuff keep at it you two.
Your a Cool Dude Chad brother! You two make a hell of a team. Jolene is a darn good photographer. No jerking around. Slow positive moves. She’s very very good!!!👍👍🥸
I really try to watch all your videos and I fell like when I miss one I am losing out on learning something I may not have none so thank you for sharing it with us all u r a kick ass guy
Chad you are amazing !! I’m 65 years old and have quite a life but watching you makes me want to do so much more yet 🤔🤔. Thank you bad Chad and Jolene and FINA 48 hour of your time every single day !! 💥⚡️☄️🥇🥇🥇
You should see how fast he goes when he really wants to lol. This guy is a beast. He could open a drive-through top chop shop! “Let me have a hamburger and fries and a Diet Coke and ummm about 6” off the top!
The reason for the "wild bends" in the floors is for strength its positions are going to be specific to add strength in certain areas for collision and forces applied like torque and sheer force
This is an amazing build Chad! Working it out as you go but for the life of me do not understand why you would not put rear end and prop shaft in, before you make the floor. One thing for sure I am going to find out, you are probably two or three steps ahead of me haha It's just a brilliant show your mind is racing ahead all the time
Well im floored by this episode..ha...looking really good...moving right along..definitely don't fear old rusty cars no more...I liked them anyways but dang I gotta find me a project..ok..great episode thank you both
I am to believe if Bad Chad were dropped off in a land fill blind folded and then left to his 'common sense' (not often used in society) to his uncanny ability, he would produce a resolution to reduce the land fill. The measure of a man is positive product of harmony.
The only reason people don’t use common sense is because they don’t have any. They don’t know where to get it, and even if they did they wouldn’t know what it looks like. They would likely trip over it and break a leg. I’ve come to believe that possibly we are born with it, or not.
Real simple way to floor in a race car, Your very smart Chad and a joy to watch, you and Jolene are certainly a great match, all the planets and stars were lined up properly when you two were meeting up. Take care my friends!!!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
What I love with his videos its hands on rite there an then .Make it look so easy when it's not .looking at you all from Grenada 🇬🇩🇬🇩🇬🇩🇬🇩🇬🇩🇬🇩🔥🔥
Cliffhanger, dang... I have a new found inspiration to my car building hobby. I am having fun, again! Thanks to you!
i'm glad you are showing this procedure.
Best show on RUclips
Quick work on the floor sub frame. Always good to see what you are up to on each episode and Jolene trying to keep up with you. Thanks Chad and Jolene
This is so much fun to watch. Thanks for the great times. I tune in every day.
Great to see someone teaching ways that anyone can have go thanks for you sharing your knowledge 👍
This is going to be one of the most interesting videos I've seen in a long time
Nice work! A field trip to the junkyard is always a good time!
I really like watching you and learning something new every episode, thanks Chad!
Me to he is so informative I'm learning a lot from him.
Great episode! Thank you for huge time saving (plasma holes, one of them) build tips! Cutting and fitting rafters 👍🏻
You did a great job on Jim's car we know you will do a great job. This Tim its out in the open which will make it easier. We all know Jolene will do fabulous with the camera work.
No floor, no problem, lol. Nothing is a problem when you have the tools and mind you got, rock on, Take care and thanks. Cheers and peace out.
Awesome job Chad and Jolene. It is cool to watch it come together
Wow we were at the wrecking yard this morning getting a rear-end and now already you're hopping on the floor work. Awesome job guys
Remember as a kid when the junkyards were full of 1930s and 40s cars?
I DO !!!
Parts were not cheap either!
You had to pay 20 bucks if you wanted a whole clip from something like a 37 Chevy.
Keep up the good work watching from south Carolina
74...cant get enough ..thanks for the bonus video today
I think this is going to be one of the most interesting videos when floor meets body.
Go Chad and Jolene, we’re having real fun watching you 👍🏻😉
It was nice to see I’m not the only boy that didn’t have matching shoelaces. Heck sometimes my shoes didn’t even match lol. It was terrible when I had to wear to left foot shoes. Little wonder I walked in circles all the time
Learning alot with this build
Another great lesson. Thanks guys.
Floor going in already great news
Enjoyed the junk yard video and the floor installation process. Another great information video from Jolene and Chad. HI FINA!!!!! Bill
Chad you are the master of metal! Looking forward to watching tonight. Always enjoy the show. Thank you Chad and Jolene for the great videos every day
This guy has his on show. That's basic cable for ya. They'll do anything for views. This proves my point. Go watch a real mf build real shit. Check out Bellos Customs. This is like polishing turds.
that's so much fun to watch , love your work both of you
What a guy just like the ever ready bunny great job chad and Jolene watching from ohio
Hi Jolene and Chad, Here to watch another great show on the racecar build. Thank you
Moving along with the HupFORD. Chad always makes great progress and Jolene is terrific with the camera. Floor fab today will be a good one.
Moving fast with the race car. It is going to be on the frame in no time. Keep up the great work!
Love watching and learning. Thanks for the hard work you two
These episodes are like the old cliff hangers! Can’t wait to see what you will do next! Guess you are figuring it out as you go Chad!
Chad and Jolene, Will you box in the car frame for strength? In addition, will you run stamp beads in the floor panels for added strength? Your sailing on the fly with the fabrication. It's great to watch. Thanks for your dedication and sacrifices. The show is wonderful.
Your on the way to a nice hot rod ! Thanks for the video
Chad & Jolene, I really enjoy what you both share with the world. Thank you!!
Anti-Flintsoning the Hupfordmobile.
Love it! Keep on chooching!
Best RUclips channel ever.
Love it that the shop is seasonally adjusted or located. Lol Peace out!
I'm floored how Chad just does it.
Chad is the master and champion of free hand grinding and cutting. I use to grind on art work for 12 years and this guy is great at free handing a cut. He makes it look easier than it is.
Always learn something when I see your videos.It's like FRIDAY everyday.GBY!
Thanks for this, looking forward to seeing you guys tomorrow. 👌
2 videos in one day. God bless you and jolene 👉♥️♥️⚘⚘👍👍🙏😎
I love the " dat dat dara!"...i means the mind is working faster than the hand! Love it!
Good Saturday afternoon. This great watching you and your own ideas. Have a great evening.
Coming along really good. It will definitely be a one of a kind!
Getting closer everyday, looking good. You two work well together to create a great channel.
Chassis looking good Chad with the short of time spent on it . Loving this race car build thank you
Great work again, it's looking so easy to build a floor in the car,but it still is a piece of masterwork,also great filming again Jolene,also liked the video at the scrapyard,a lot of treasures over there,thanks for sharing
Hey Mr. Love your channel you rock my 11 yr old and I watch all your videos it's awesome showing my boy how to use your head and think outside the box you can do anything I was raised that way didn't have a lot but worked with what I had and could get much love from clarkston washington USA
Cracking on at a fair pace now and moving closer to seeing chassis and body together. Can't wait to see you section the rear wheel wells. Awesome stuff keep at it you two.
Can’t wait to see what you will do with this ongoing build
that same as the rest never finished
Your a Cool Dude Chad brother! You two make a hell of a team. Jolene is a darn good photographer. No jerking around. Slow positive moves. She’s very very good!!!👍👍🥸
Great job again today thanks for sharing your knowledge with us.😁
I really try to watch all your videos and I fell like when I miss one I am losing out on learning something I may not have none so thank you for sharing it with us all u r a kick ass guy
Chad you are amazing !! I’m 65 years old and have quite a life but watching you makes me want to do so much more yet 🤔🤔. Thank you bad Chad and Jolene and FINA 48 hour of your time every single day !! 💥⚡️☄️🥇🥇🥇
I bend electrical conduit the exact same way for a perfect fit on a piece of equipment. Just look around for something to hook it behind/under 👌
Saturday night entertainment and learning session, most enjoyable.
This should prove to be informative, can't wait to see.
Thanks for producing this great content!
Florida here I enjoy watching.
The Hupford is coming along nicely
Awesome! Really incredible work. Thank you Chad
I think the Hubmobile FORD/HOTROD is going to look very cool.... looking forward to seeing it completed.
Everything you say makes sense when it come to this kind of any car will understand its great work
Big thumbs up to you guys! Your rocking it hard and fast!👍
It's amazing how fast You Guys are putting these creations together with parts mostly from around the yard
You should see how fast he goes when he really wants to lol.
This guy is a beast. He could open a drive-through top chop shop!
“Let me have a hamburger and fries and a Diet Coke and ummm about 6” off the top!
Great find with the 2 rear end. Thanks for the video Jolene and chad 👍👍👍
and it all begins again...looking great thx
The reason for the "wild bends" in the floors is for strength its positions are going to be specific to add strength in certain areas for collision and forces applied like torque and sheer force
Thank you for sharing some amazing insight into building hotrods.
Amazingly fast. Brain! Love watching the projects develop
Thanks for today’s content it’s lookin some good!!!
It's amazing watching Chad's mind working
Really enjoyed this tutorial on building floor ,got some ideas for my son's 31 ford tudor keep doing what you're doing and carry on. 👍
This is an amazing build Chad! Working it out as you go but for the life of me do not understand why you would not put rear end and prop shaft in, before you make the floor.
One thing for sure I am going to find out, you are probably two or three steps ahead of me haha
It's just a brilliant show your mind is racing ahead all the time
Thank yall for the hard work
Fast, rational, creative and brilliant, 😎👍 as always.
Great job guys.
hey Jolene, 😉 nice surprise ending. 🎬
Greetings from Switzerland
Amazing job, so far so good.
I don't think I've ever seen someone work so fast at such level
got two Jeep rears in an earlier bonus video and this one is very flooring LOL keep up the great work
chad i'm very happy and excited about you doing your custom body work ,cool
Chad makes it look as easy as Kraft Dinner! 👍
Keep up the good work Chad and Jolene 👍
Keep up the great work Chad, look forward to seeing many more episodes.
Doing a fantastic job on the frame Chad you & Jolene keep up the great work and God Bless you guys. 🔥💯💪🏼👍👍🙏🙏✌😊✌
Use what you got. I like that. Keep it up. 🏁🏍️🏎️🏆🎖️🥇🏅
Always learning so,Ethan new from Bad Chad.
Well im floored by this episode..ha...looking really good...moving right along..definitely don't fear old rusty cars no more...I liked them anyways but dang I gotta find me a project..ok..great episode thank you both
Great work, love this show 👍
I'm floored by this build. :)
No floor, no problem. Chad shows the way.
its good of you to save these cars most people would scrap them
Some good material for making hot rods. Or you can make one of a kind cars like Chad does.
I'm really curious as to how drive shaft will work with the rear end up above the chassis gonna be interesting to see
I am to believe if Bad Chad were dropped off in a land fill blind folded and then left to his 'common sense' (not often used in society) to his uncanny ability, he would produce a resolution to reduce the land fill. The measure of a man is positive product of harmony.
The only reason people don’t use common sense is because they don’t have any. They don’t know where to get it, and even if they did they wouldn’t know what it looks like. They would likely trip over it and break a leg. I’ve come to believe that possibly we are born with it, or not.
Amazing man can't hardly wait to see them done!..class in session!
This is going to be a great episode!
This guy is amazing....He is a mad scientist...He is Bad Chad ....
Can’t wait to see how the floor turns out
Real simple way to floor in a race car, Your very smart Chad and a joy to watch, you and Jolene are certainly a great match, all the planets and stars were lined up properly when you two were meeting up. Take care my friends!!!
🤪🤞🤞hope the power comes back on to see the completed floor.🎬🎬
Habeing a plasma cutter is amazing what a Time saver
Do your thing bad Chad🤘🤘