Thanks for this video! I have owned my P07 (with the CGW spring kit and firing pin) for two years and never had an issue until recently, When I decock the trigger the hammer is dropping all the way down (but not contacting the firing pin due to the firing pin safety).Instead of ending the pistol back to CZ, do you think installing the CGW hammer and sear spring would correct this issue? I am wondering if the sear just isn't caching on the small shelf of the factory hammer. I am willing to give it a go since it will improve the SA trigger as well. Thanks in advance!
Great video, thanks! So I put in the natural sear spring, with the 15# hammer spring. I haven't shot the gun yet, but my goodness that SA is super light. Would the red sear spring make the SA a tad bit heavier? Or should I put in the extra heavy firing pin block instead or both?
My P09 has real bad hammer walk to one side while in DA stroke. The trigger feels awesome thanks to CGW but I think the hammer walk is just the nature of the plastic frame on hammer contact. A little concerning but works great.
Nice video, I have one question, is the trigger mechanism the same for the c09 and c07? Since I'm thinking of improving my trigger and I see that the spring type and other things are marked as suitable for both p09 and p07? Ty
I can’t get my decocker out when I press the ejector down. Very little tolerance between the decocker and Sear. It’s hitting off the sear when I try to pull it out. I have the PO9 Cadet .22 so not sure if it’s the same. Any suggestions?
I have a question regarding the alignment of the lines when assembling and disassembling the gun. I own the P07 and I can disassemble and reassemble the gun with or without the lines being aligned. Is this unusual? The slide stop seems to work just fine either way.
Yes his explanation of things suck. “What you want to do” and then you cant see because it’s not zoomed in and his hands cover everything. Also if he could show the parts laid out from the pro package and then take them out in order and replace them.
Directions too fast, not zoomed in close with good lighting. Some speech slurred, directions not concise. Fair demonstration. Suggest you delete tis video, and redo slower, clearer explanation. Especially if your representing a company like Cajun Gun Works. Be more polished and professional. Love my P-09
Thanks for the updated video. The P09 is such a great pistol and the omega design is so simple.
Where on this was the roller bearing you have to measure for the pro kit?
/attached to the lifter
@@cajungunworks526 awesome. Thanks!
This really is so fascinating to see.
Ive watched this a couple times and feel confident enough to order the kit. Merry Christmas !
I wish you guys would make some kind of a magwell for the p07
Buy one from Rushby Industries
@@linesanraman7974 Bingo
Thanks for this video! I have owned my P07 (with the CGW spring kit and firing pin) for two years and never had an issue until recently, When I decock the trigger the hammer is dropping all the way down (but not contacting the firing pin due to the firing pin safety).Instead of ending the pistol back to CZ, do you think installing the CGW hammer and sear spring would correct this issue? I am wondering if the sear just isn't caching on the small shelf of the factory hammer. I am willing to give it a go since it will improve the SA trigger as well. Thanks in advance!
Awesome video! KEEP ON ROCKING!
Hahaha I love how you use your brothers to disassemble lol....probably gave it back like hey bro dont know what happened.
got the trigger spring set. damn its different.. but in a good way. the trigger reset spring broke on my p09.
Great video!
I have a P09, how do you lighten up the double action?
Great video, thanks! So I put in the natural sear spring, with the 15# hammer spring. I haven't shot the gun yet, but my goodness that SA is super light. Would the red sear spring make the SA a tad bit heavier? Or should I put in the extra heavy firing pin block instead or both?
Should this video work with taking down a P09 Nocturne C/full size?
There should be no mechanical difference between the p07 and the p09 c nocturne.
Thanks, visited Cajun Gun Works this summer, great people doing great great work.
My P09 has real bad hammer walk to one side while in DA stroke. The trigger feels awesome thanks to CGW but I think the hammer walk is just the nature of the plastic frame on hammer contact. A little concerning but
works great.
I can't find that work mat on the website. I neeed it lol
Nice video, I have one question, is the trigger mechanism the same for the c09 and c07? Since I'm thinking of improving my trigger and I see that the spring type and other things are marked as suitable for both p09 and p07? Ty
The P-07 and P-09 share all of the same internals.
I can’t get my decocker out when I press the ejector down. Very little tolerance between the decocker and Sear. It’s hitting off the sear when I try to pull it out. I have the PO9 Cadet .22 so not sure if it’s the same. Any suggestions?
Push the front of the sear down too
What cerakote color is the slide???
I have a question regarding the alignment of the lines when assembling and disassembling the gun. I own the P07 and I can disassemble and reassemble the gun with or without the lines being aligned. Is this unusual? The slide stop seems to work just fine either way.
No this isn't unusual. Some firearms seem to compart a little easier than others. I wouldn't be worried about it.
Dude love this
wish I had the money to fix up my po9 like that.
Use the extra heavy sear spring first.
Where does the DA Roller go. Please, for the love of God help me before I throw this P07 in the woods and forget I ever owned it.
On the far right side of the sear pin between the frame and lifter
Yes his explanation of things suck. “What you want to do” and then you cant see because it’s not zoomed in and his hands cover everything. Also if he could show the parts laid out from the pro package and then take them out in order and replace them.
@@shotbru I've already thrown it in the woods. (I got a good offer and sold it)
1540 ish.
Namlu ucundaki parçanın ismi nedir ve ne işe yarar
With stuff youd have at home. Anyhoo imma use a punch 😂😂😂
Who doesn't have a punch? I mean, even a nail set or a brass rod would work
Will a PMM compensated P07 fit on the P09 frame? Been trying to find out if it can like a PMM compensated P10 hybrid.
Directions too fast, not zoomed in close with good lighting. Some speech slurred, directions not concise. Fair demonstration. Suggest you delete tis video, and redo slower, clearer explanation. Especially if your representing a company like Cajun Gun Works. Be more polished and professional. Love my P-09
Sissy
I need a field strip not this bs
A field strip is just a removal of the slide, barrel and recoil spring. The first part of the video shows this.
What a pain in the ass