L.E. I pay for this item on 14.04.2024,it was shipped on 15.04.2024 and i receive the package on 30.04.2024,in Romania,in perfect conditions. Very very fast shipping from Canada to Romania! Awesome! Brilliant seller! Many thanks! Instant activation of product, after i sent email for this! I will try to use it for programming an volvo CEM,1999,2.0T and come back with review! Goog luck, everyone!
Hello. I watched your clip and it is very useful, very explicit. I have a volvo s80 from 1999 and on board I have a lot of errors caused by this CEM. I bought another CEM, which I want to clone with the information from my CEM. Please tell me, if I follow your instructions and copy the information from one CEM to the other CEM, is it enough to make it functional or do I have to also copy the information from the 28f400 flash memory? I saw in the video that you only copied the information from MC68376. Thank you . 
Hi ! So if all keys lost on this kind of Volvo CEM , the owner needs a pincode from CEM before any new keys can be programmed. Your BDM or your new U-link NT I do not see or hear anything about pincode in your video. So now can you tell or explain if U-link NT actually brings the pincode? My issue is pincode ! So I can program new keys because all keys lost. If it can do so I can buy it. But I saw nothing in the video about pincode or adding keys .
@@usbbdm So the data we saved by doing this procedure with your kit what app or software can analyze it? If you can add that analyzer for me in my purchase then I will buy it confidently because then I know I can get the pincode from data analyzer app. Thanks if you reply again to finish this for me.
@@maniimran4758if you save the dump from flash you can use a variety of tools to add the key on bench. You only need pin if you programming through OBD
Hello sir , i have read erase and blank check succesfully . But after writing data .. verification fails. Tried different things .. what could be the issue ?
@@usbbdm your other great video about creating new target xml file had helped me alot. I did not want to solder but i always use very high quality programming probes/pins. I know soldering is better but i literally use them for every car ecu i work on in jtag or bootmode. So instead of making the device work faster by modifying a new xml target file i decreased the speed in target file and set programmer to 4500mhz and everything was fine after. Thanks alot for making these videos . I have learned alot today 😁
Hello. I buy this item and pay with paypal. I receive confirmation of purchase on my email adress and after two days,i receive another email with shipping confirmation,without any information of package number, tracking number,document number,anything.! Nothing. I send you two emails and i ask for any information to can find a information of shipping/delivery status but ,no response. Weird! How can i find a information? Many,thanks.
EDIT: I found the other video but it reminded me of another problem I had. The scripts. Very confusing. Maybe someone will have better luck. ruclips.net/video/uUIETPyCdJI/видео.html
I tried using this a few years ago following another video. You can use VVDI2 to write key but the file has to be inverted. Maybe the creator can assist.
L.E.
I pay for this item on 14.04.2024,it was shipped on 15.04.2024 and i receive the package on 30.04.2024,in Romania,in perfect conditions. Very very fast shipping from Canada to Romania! Awesome! Brilliant seller! Many thanks! Instant activation of product, after i sent email for this! I will try to use it for programming an volvo CEM,1999,2.0T and come back with review! Goog luck, everyone!
Hello! I did get the "usb jtag nt" many years ago, will it work? or do i need to get usb bdm nt or perhaps newest u-link nt to read my cem?
USB JTAG NT will not work with this one. If you have USB BDM NT it will work. u-Link NT will work both JTAG and BDM targets.
Hello. I watched your clip and it is very useful, very explicit. I have a volvo s80 from 1999 and on board I have a lot of errors caused by this CEM. I bought another CEM, which I want to clone with the information from my CEM. Please tell me, if I follow your instructions and copy the information from one CEM to the other CEM, is it enough to make it functional or do I have to also copy the information from the 28f400 flash memory? I saw in the video that you only copied the information from MC68376. Thank you .

As far as I know it is sufficient.
Hi ! So if all keys lost on this kind of Volvo CEM , the owner needs a pincode from CEM before any new keys can be programmed. Your BDM or your new U-link NT I do not see or hear anything about pincode in your video. So now can you tell or explain if U-link NT actually brings the pincode? My issue is pincode ! So I can program new keys because all keys lost. If it can do so I can buy it. But I saw nothing in the video about pincode or adding keys .
u-link NT is simply a programmer to revive the unit. You need to analyze the data to where the key is.
@@usbbdm So the data we saved by doing this procedure with your kit what app or software can analyze it? If you can add that analyzer for me in my purchase then I will buy it confidently because then I know I can get the pincode from data analyzer app. Thanks if you reply again to finish this for me.
@@maniimran4758 I do not have anwer for the question as I do not do car tuning mysefl.
@@maniimran4758if you save the dump from flash you can use a variety of tools to add the key on bench. You only need pin if you programming through OBD
@maniimran4758 did you ever figure this out
Hello sir , i have read erase and blank check succesfully . But after writing data .. verification fails.
Tried different things .. what could be the issue ?
I have solved it. Thanks alot !
Depends on where it fails. Could be the 12V not apply properly.
@@usbbdm your other great video about creating new target xml file had helped me alot. I did not want to solder but i always use very high quality programming probes/pins. I know soldering is better but i literally use them for every car ecu i work on in jtag or bootmode.
So instead of making the device work faster by modifying a new xml target file i decreased the speed in target file and set programmer to 4500mhz and everything was fine after. Thanks alot for making these videos . I have learned alot today 😁
@@martinflierman2456 If you he you have longer wire you need to use slower clock.
Hello. I buy this item and pay with paypal. I receive confirmation of purchase on my email adress and after two days,i receive another email with shipping confirmation,without any information of package number, tracking number,document number,anything.! Nothing. I send you two emails and i ask for any information to can find a information of shipping/delivery status but ,no response. Weird! How can i find a information? Many,thanks.
Check your spam folder
Where to buy this u-Link NT,original product,not chinese. Thanks
Check the end of each video.
hello sir.. can ship to Indonesia?
Shipping is not good these days.
@@usbbdm info if ready to ship
EDIT: I found the other video but it reminded me of another problem I had. The scripts. Very confusing. Maybe someone will have better luck.
ruclips.net/video/uUIETPyCdJI/видео.html
I tried using this a few years ago following another video. You can use VVDI2 to write key but the file has to be inverted. Maybe the creator can assist.
@@thekeyman2372 The software allows you to swap the data read from other programmer. The command is "hilo"