ideal specs 18x9.5 +22 front and rear. 225-45-18 tyres. for now a 5mm slip on spacer on the front will get rid of the rubbing. CR kai, T5r, T7r Work wheels are common on JZX models. go with what YOU like. buy quality wheels, try not to buy replicas if you can help it due to faulty manufacturing.
Amazing, hope your wheels dont drop off, you now got after market wheel nuts on factory wheels and vice versa. The chamfer of the nuts are normally different, i.e. factory are 60 degrees thru to 35 degrees. . might pay to check em!!
Always pays to check this. Some wheel bolts/nuts have a conical taper, some have a spherical taper, if you get it wrong you can do a lot of damage when they come loose.
@@AdamC3046 I would pull one of each wheel bolt off and compare the tapers to make sure they're the same type. If a wheel comes loose it will rattle about on the hub and destroy the taper seat on the wheel.
@@davidrobert2007 They don't have to come loose to do damage. I had alloys with conical taper than someone had use radius bolts on and just torquing them up mashed the taper in the wheel.
Adam I luv the jr11 wheels. I actually have a set from my Lexus ls430 that I will soon be trying to make fit to my mk3 superb. But they would look lovely in white
Have you tried the Bola B1s? They're a Rays rep but still pretty strong and good value. I think they'd suit the Chaser and they come in white (I have them on my FN2)
White on white looks better than black on black for me . As I said on FB only persons opinion who matters is yours if others like it for not but handy you have the swap. Those wheels would both fit my lancer CS and look different again
I was surprised but I actually think the 350 suits its new wheels better than the Chaser. That's entirely down to the colour issue though. With the right white, that will look the absolute tits.
just paint the wheels whatever white the chaser is. the other wheels suit the Z, but i reckon they would suit better if the car was still its original blue.
It is amazing what different wheels make to a car. Sometimes good, sometimes bad, but I think you should run them for a while. Great video buddy. 👍
Great call. They both look better.
“A pop?…no, I think I ran over a branch” 😂
White wheels on Chaser look sound Adam! Without the centrecaps they’ll look even better 👌🏼
I appreciated the fact you cleaned the base before applying and enjoyed the small comment made about this. Great looks on both setups
ideal specs
18x9.5 +22 front and rear.
225-45-18 tyres.
for now a 5mm slip on spacer on the front will get rid of the rubbing.
CR kai, T5r, T7r Work wheels are common on JZX models. go with what YOU like. buy quality wheels, try not to buy replicas if you can help it due to faulty manufacturing.
Haha nice twist there Adam. Practically free 😂
I think both swaps suit each car. The chaser really does suit white socks 👍🏼
The old wheels on the chaser look better
I agree
Imo should of kept the original chaser wheels and make them look more silver and shiny
Both wheels are terrible
If you’re spending money on an expensive car then don’t cheap out on wheels and look like total baboon at the meets 🤡
@@connoisseuroftigolbitts that Can be cheap and good wheels, i love both
Nice mate, nice to meet you at Hendys Thruxton the other day 🤙
I really like the changes on both the cars! Really cool
Amazing, hope your wheels dont drop off, you now got after market wheel nuts on factory wheels and vice versa. The chamfer of the nuts are normally different, i.e. factory are 60 degrees thru to 35 degrees. . might pay to check em!!
Always pays to check this. Some wheel bolts/nuts have a conical taper, some have a spherical taper, if you get it wrong you can do a lot of damage when they come loose.
I was going to change the nuts over, but the two cars have slightly different thread patterns.
@@AdamC3046 I would pull one of each wheel bolt off and compare the tapers to make sure they're the same type. If a wheel comes loose it will rattle about on the hub and destroy the taper seat on the wheel.
@@davidrobert2007 They don't have to come loose to do damage. I had alloys with conical taper than someone had use radius bolts on and just torquing them up mashed the taper in the wheel.
12:42 possibly riding to the left because of the road camber? A roads usually have a slight slope to help draining.
Looks great !!! ✅
Perfect combination for the chaser
You need a Adam c sticker on one of the spokes lol 💯 look sick tho
Whatever that brief shot was of at 5:10... THOSE wheels will look brilliant on the Chaser!
Yuck
Both cars look 100% better with the wheel swap 👌🏻
Oooh Yes the 350 rims look SICKKK on the CHASER👏👏 and the 350 looks dapper with the chaser rims on👍👍 Great Thinking ADAM C👏👏👏 Wheelie good idea😂
Def has made both cars look better, the dark wheels against the yellow works great and white wheels on the chaser def looks way better 👌
Improvement to both I reckon. The 350 has a classic sports car look now.
Adam I luv the jr11 wheels. I actually have a set from my Lexus ls430 that I will soon be trying to make fit to my mk3 superb. But they would look lovely in white
Good video,the wheel switch looks good.
I rarely like clickbait but this was clever, and it was great. I actually like the Chaser's wheels on the Nissan
Can we see some Rostyles on the Chaser??
We cannot
you can always respray the rims which are now on the chaser to match them up ?
Can you fit ganidor mirrors? 👌also try strom wheels for Ireland they have few different designs at affordable prices 🤫👌👍
I think black rims on the 350z look great
Check out team dynamics jade R wheels dude, they could possibly go well in white? I quite like the Nissan wheels on it though tbf 🤷♂️👍🏻
Surprisingly nice, white 5 spokes in my opinion would look great 👍 as deep dish with yellow centers for the nissan.
@AdamC3046 what about a set of white Enkei RPF1’s in white?
free fiddy looks mint on those wheels
The ray wheels are brilliant for other Nissans, gives them that oem+ look
the chaser looks so good now and the nissan ain’t too bad either but teh white wheels did look great on it
I think the z suits the chasers wheels really well. I think both cars look better imo
Very good idea!
Have you tried the Bola B1s? They're a Rays rep but still pretty strong and good value. I think they'd suit the Chaser and they come in white (I have them on my FN2)
No they’re a Rays rep lol, why’d you wanna run reps?
@@beanmw96 Because they cost 1/4 of the price.
👍👍. Looks awesome 👍👍.
chaser sounds awesome
Japan Racing Wheels needed
JR19 would look cool
Chaser would look sick on air ride white with chrome rims wing delete and a sub in the back
White on white looks better than black on black for me . As I said on FB only persons opinion who matters is yours if others like it for not but handy you have the swap. Those wheels would both fit my lancer CS and look different again
Yoooo the 350z shoes are gonna look so good on the jzx
🤍🤍🤍🤍 chaser looks amazing Adam 👍 and the z 🖤🖤🖤🖤 brack dust will be your pet hate 😂
Pink neons on a white chaser... Idk why but that just looks mint as 👌
A lot of the Advan wheels are six spoke like TE37 and your 350z wheels however they are very expensive.
Great swap over on the shoes for both cars. Now what about “bring neon’s back”?
What should you do next? Bin it for clout, or sell it
Or something else
I can imagine that distinct 90s car smell, my Volvo 940 has the same!
They look a lot better amazing what difference can do
Yeah the old vrs from the chaser look better on the 350z.. it actually suits it better than the white did. Also please get the tires sorted
I think they both look better 👍
Yes Adam love the new trainers on the chaser it’s a temporary fix but wow let’s hope you don’t get a curb crawling with these ones lol
They look good on the chaser same white and be spot on 👍
I was surprised but I actually think the 350 suits its new wheels better than the Chaser. That's entirely down to the colour issue though. With the right white, that will look the absolute tits.
You have to get a real JDM body kit and maybe candy apple red metallic wheels will look sweet Adam
I wanna see that e36 in the background 😌
White wheels on the chaser definitely works, just not those wheels.
The chaser wheels work so much better on the 350Z than on the chaser.
TE37s for the chaser mate ,in white of course !!
Too similar to what I've just put on it
So glad you mentioned that white wheels look awful on white cars when they are a different white. I was about to start shouting at my tv :D
The chaser wheels on the 350z looks awesome
For some wheels for your chaser how about some bola's
Bola B1's would look good on the Chaser. Not too costly either 👍🏻
I think the wheels I have on my 23 year old E38 BMW 7 series sport would look good. The Style 37 18 inch wheels.
Work emotion cr Kiwami look beasts on chasers, driftworks stock them so tap them up you never know you might get a few quid off for a free plug or 2
Both cars suit the alloys now the 350z was cool with the white but still looking good as the wheels match the hood nice swap
I don’t think I’ve come across a white chaser on TE37s 👀 but more on the expensive side but I think they would really suit the car 👀
They look too similar to the wheels I've just put on it
The chasester✌🏻🇳🇱
Look up cruize alloys, £600 you get anything from old bbs style to new race look
Hi Adam You should get some enki rpf1s on it
Both look better now.
They both look better, Leave the wheels the same white on the chaser just centre cap change
Just keep the Nissan caps in for the memes
Have a look at the JR32 adam
👍 👍 👍 Could spray them gloss black
And make them invisible?
White Jr11’s would slap
Both look better with changed wheels
Have to put neons on the chaser
Definitely better!!
Actually I like the swap both cars look better 👍🏼
I think white 5 spokes on the chaser and those 6 spokes back on the Nissan
Every proper Chaser needs a proper set of TE's.
i think both cars look better with there new wheels
for the chaser white toyo proxes
If the Z had meaty tires on it the wheels would look better. I really don't do streched tires. The Chaser looks way better!
Both cars look better
It,s a YES from me like both cars
1:54 its a JZ engine so it should make a thousand horsepower
Needs tracking after changing wheels 😂😂😂😂
Yup
Much better
Can you come caffeine and machine on bank holiday for diakoku nights plz
The rub is due to the wider wheel on the front
What time will it start
It does say
@@AdamC3046 Just saw, I feel like a idiot lol. I reckon your going brave and put on some whites
Drift livery but with Adamc fest
Yup
Couldn’t believe u saw my dm love ur videos ❤
Deep dish are better and spray them the same colour of car,,, makes sense,,,and new tyres
just paint the wheels whatever white the chaser is. the other wheels suit the Z, but i reckon they would suit better if the car was still its original blue.
bring neons back on the chaser
👍
Needs a nice body kit ❤
Did they forget to concrete the floor in that garage?
Now swap the wheels between the Chaser and the IQ.
326 wing would look good
Chaser looks better now in my opinion, will drive/turn fine with the rear wheels on the rear & fronts on the front. The Z on the other hand.. 💩