I called and talked to Tom about installing the windshield and heater and he was a really good help. Thank you for posting these videos! Hopefully 2024 accessories will be more plug and play.
Good Morning, I suppose my concern on cost is directed at the competition (Polaris/ Can Am). If you were in the market for this particular side by side the CFMoto comes in around $10,000 less the way this is built compared to the competition. Not everyone wants the wiper kit so that is why it is offered as an accessory. Also, there are aftermarket hand crank options that are much less if that works better for you! Enjoy the ride, Jared
Exactly. I'm having to install one at a dealership and the instructions don't say anything about where to run wires, just to do it and I'm the first one here who's doing one.
@@killianlastname1108 well since they did away with the plug and play on the 24 models right behind the fuse box is a 3 wire plug u can plug in a bus bar to it or just cut the plug and wire it direct the outer 2 wires are your hot wires and the center is ur ground use the white with green line and the center ground leave the other wire about 2 inches long and tuck it back and cover it with tape and it will only work with the key on so that’s how I have been done it
Just installed the kit, any chance you could share how you connect the 12 volt power? The harness has a plug, but no pigtail plug to tie into the machine anywhere?
Great video. Anyone looking for the main cable harness plug for the wiper, it can be found under the right fender after removing the wheel well panel. On a 2023 XL anyway. Wanted to share as I spent too much time looking for it in all the wrong places and thought it might require an accessory fuse block.
We’ll see I work and build Cfmoto drone Side by sides to street bikes and ATV’s and the 2023 model had that plug for the 1000 and the 1000xl under the fender witch was a great place to run your plug to but the new 2024’s do not have that plus so I talked to a Cfmoto rep and that they was coming up with an ode to fix that issue so I came up with an idea so there is a 3 wire plug behind the fuse box right on the firewall and there is a purple wire a blue wire and a white wire with a green stripe on it so I have been hard wiring my wiper kits there the white wire witch is a hot wire the green wire witch is a negative wire the purple wire is a hot wire as well so either out side wire will work as long and u connect the other wire to the middle so my green wire went to my brown wire on the wiper plug and my blue wire to the green wire and it works with the key on as it should but does not with the key off witch shows me it’s doing what I needs to do
Does anyone know if you have to drill the glass with the windshield shown in the video? I have the same, but it looks like you would only need to drill the black plastic?
Good Morning, wherever you hit the button is where it stops. I suppose with me making a video I was not super in tune with where I stopped it. You can get it to stop higher, just have to hit the switch in time. Enjoy the ride, Jared
I called and talked to Tom about installing the windshield and heater and he was a really good help. Thank you for posting these videos! Hopefully 2024 accessories will be more plug and play.
What world do you live in where only $495 is not to much $ for a wiper. That should be the combined price of windshield and wiper assembly
Good Morning, I suppose my concern on cost is directed at the competition (Polaris/ Can Am). If you were in the market for this particular side by side the CFMoto comes in around $10,000 less the way this is built compared to the competition. Not everyone wants the wiper kit so that is why it is offered as an accessory. Also, there are aftermarket hand crank options that are much less if that works better for you! Enjoy the ride, Jared
@3SeasRecreation I haven’t been able to find a video showing how to remove upper half of the door like the ones on that UFORCE your in in this video
Great dealer and very good customer service
Thanks for the positive feedback! Enjoy the ride, Jared
How about a video of the wiring and how u added the power supply to it
Exactly. I'm having to install one at a dealership and the instructions don't say anything about where to run wires, just to do it and I'm the first one here who's doing one.
@@killianlastname1108 well since they did away with the plug and play on the 24 models right behind the fuse box is a 3 wire plug u can plug in a bus bar to it or just cut the plug and wire it direct the outer 2 wires are your hot wires and the center is ur ground use the white with green line and the center ground leave the other wire about 2 inches long and tuck it back and cover it with tape and it will only work with the key on so that’s how I have been done it
Just installed the kit, any chance you could share how you connect the 12 volt power? The harness has a plug, but no pigtail plug to tie into the machine anywhere?
Great video. Anyone looking for the main cable harness plug for the wiper, it can be found under the right fender after removing the wheel well panel. On a 2023 XL anyway. Wanted to share as I spent too much time looking for it in all the wrong places and thought it might require an accessory fuse block.
Great feedback! Thanks for sharing your experience, I am 100% sure that will save people some time LOL. Enjoy The Ride, Jared
We found it! Thanks for thar tip!
Thanks for this!!
We’ll see I work and build Cfmoto drone
Side by sides to street bikes and ATV’s and the 2023 model had that plug for the 1000 and the 1000xl under the fender witch was a great place to run your plug to but the new 2024’s do not have that plus so I talked to a Cfmoto rep and that they was coming up with an ode to fix that issue so I came up with an idea so there is a 3 wire plug behind the fuse box right on the firewall and there is a purple wire a blue wire and a white wire with a green stripe on it so I have been hard wiring my wiper kits there the white wire witch is a hot wire the green wire witch is a negative wire the purple wire is a hot wire as well so either out side wire will work as long and u connect the other wire to the middle so my green wire went to my brown wire on the wiper plug and my blue wire to the green wire and it works with the key on as it should but does not with the key off witch shows me it’s doing what I needs to do
Wiper is a must for full cab units
We agree! Enjoy the ride, Jared
Can this be installed on a poly Windshield ? I have a 23 zforce 800 Trail.
Will this wiper kit work on a 2023 CFMoto Uforce 600 with a glass windshield (looks exactly like the 1000 one you installed the wiper on)?
Does anyone know if you have to drill the glass with the windshield shown in the video? I have the same, but it looks like you would only need to drill the black plastic?
My 2023 Uforce 1000 already had a wiper but the range of wipe is only 90 ° Is there an adjustment for this?
Good Morning, nope that is just the way the motor is designed. Nothing can be done with the internal motor that we are aware of. Enjoy The Ride, Jared
How about showing the install?
Hey I'm looking for a how to install on that windshield wiper. Any info would be appreciated. Thanks
Good Afternoon! The next time we install one here at the shop I will be sure to video the install! Enjoy the ride, Jared
Is that the same kit for the UForce 600?
Do you have an installation video for this by chance?
Good afternoon, no I do not but we will film one on the next glass windshield that we install. Enjoy the ride, Jared
Is that really where the wiper sits in the off position?
Good Morning, wherever you hit the button is where it stops. I suppose with me making a video I was not super in tune with where I stopped it. You can get it to stop higher, just have to hit the switch in time. Enjoy the ride, Jared
Do you have a video on installing that windshield?