Just wanted to update here I've had this light for over a year I've used it everyday Or I should say every night..I work night shifts so my light gets used a ton!! Love it Love it Love it!! If you've got big hands you have a problem getting your hands in and out of your pocket this is 100% the light for you!!
The obvious pride you take in making exactly what I was looking for in a small light has immediately put this at the top of my "to buy" list. Can't wait to add this to my pocket
Update! I received the light today. I can say it’s very well made! Solid! I don’t see any reason why this light won’t last a life time. The only issue I’m having at the moment is getting memory mode turned off 😂. But I’m sure with time I’ll figure out.
Can you do a video on configuring this light? I cycle the switch 15 times but it never seems to go into configuration. I just want to turn on memory mode
I’ve probably clicked 500 times and can’t seem to get into programming mode. Battery only blinks 4 times too so that’s great.. not loving 400$ flashlight just yet. Will try again tomorrow but any advice here to inspire me keeping this is appreciated thanks!!
Have you charged the battery? The battery will need charging to reach max power and each battery will vary a little and some may not reach full ability of the light. Programming is checked on each light when assembled. It’s in speed and technique and you can check some of my other videos for help to get used to it.
@@bryancbailey I have not tested different power levels, on high allowing light to thermal regulate and then step down as battery weakens it ran over 2.5 hours on a new battery for me.
Charles, what battery is that is that this (10440 Efest IMR10440 V2 350mAh High Discharge Button Top) or what battery do you recommend to get the best performance out of this light? Thanks in advance for your help.
Thank you for the info, if I could give some input. I definitely recommend some testing. I purchased a Ti unit for lite use but I am around dust/water and now worried if small debris and accidentally dropping in a puddle could cause a malfunction. Again just my humble option. Thanks for your help and time.
Any update on that programming vid, could use a little further elaboration on how to work the programming mode, otherwise love the light, picked up the TAD edition
I got a couple of these coming from TAD, may i know if there are rubber switch cap, and switch available? (Or are they removable without special tools 😊?) I do takecare of my FLs but as the rubber are the ones moving i would like to have some extras as sending them from outside the US would be trouble some.
Рекламируете Американский бренд , так уж будьте любезны произносить его так как его произносят ! Но или хотя бы говорите всю информацию только русскими словами , а то половина английского сленга а вот сам нож с переводом из ГУГЛ;) Цирк!!
Just wanted to update here I've had this light for over a year I've used it everyday Or I should say every night..I work night shifts so my light gets used a ton!! Love it Love it Love it!! If you've got big hands you have a problem getting your hands in and out of your pocket this is 100% the light for you!!
Please do a video going over the thermal setting and how to set it up. Love my micro
yes I second this, I have no idea how the temp setting works, thanks
The obvious pride you take in making exactly what I was looking for in a small light has immediately put this at the top of my "to buy" list.
Can't wait to add this to my pocket
Was lucky enough to grab my first micro click the dirty bronze carry commission. Thanks brother, can't wait to check it out! 👊🏼
Just purchased Ti model. Can’t wait looks perfect.
I’m Officially on the hunt! Looks great!
He is definitely on top of it and serves his customers to the fullest!
Just got mine! Please make a video showing how to configure the light!
Getting one this week.
I'm stoked.
I thought you were making a program video.
Maybe I've overlooked it
Jus ordered one excited for mine to arrive
Just got me a machined one last night. Can’t wait to try it out
Update! I received the light today. I can say it’s very well made! Solid! I don’t see any reason why this light won’t last a life time. The only issue I’m having at the moment is getting memory mode turned off 😂. But I’m sure with time I’ll figure out.
Awesome tool! Would like to see more available from triple aught design
They should be dropping some in the next few days!!
Charles,. I like your micro Arcadian click
Just ordered the cobalt topo one from TAD!! Can't wait to get it in hand 🍻
Thank you. Hope you enjoy it!
I second the request to go over the thermal protection. Please and thank you
Man I do love this light. When I can talk the wife into it, I’d love to pick one up lol. Also, I love Titanium, but it sure is gritty lol.
I don't leave home without it!
Can you do a video on configuring this light? I cycle the switch 15 times but it never seems to go into configuration. I just want to turn on memory mode
I’ve probably clicked 500 times and can’t seem to get into programming mode. Battery only blinks 4 times too so that’s great.. not loving 400$ flashlight just yet. Will try again tomorrow but any advice here to inspire me keeping this is appreciated thanks!!
Have you charged the battery? The battery will need charging to reach max power and each battery will vary a little and some may not reach full ability of the light. Programming is checked on each light when assembled. It’s in speed and technique and you can check some of my other videos for help to get used to it.
Happy New Year from Canton, GA! Curious if you had any info on run times on this light? Thanks!
A new battery ran for over 2.5 hours for me.
@@charleswiggins9184 thanks Charles! Is that for high mode? Just ordered one of these triple aught design editions! Excited to get it!
@@bryancbailey I have not tested different power levels, on high allowing light to thermal regulate and then step down as battery weakens it ran over 2.5 hours on a new battery for me.
How long do these work on high? Do they stop to a lower setting after a certain amount of time? Thanks!
They will stepdown after getting hot, time varies depending on light body temperature, material and battery charge at that time.
@@charleswiggins9184 thank you very much!!
Is there a way to have battery check be first in the secret modes?
No.
Charles, what battery is that is that this (10440 Efest IMR10440 V2 350mAh High Discharge Button Top) or what battery do you recommend to get the best performance out of this light? Thanks in advance for your help.
That is an Efest but I am sending Vapcell with lights now. Either work great just get button top. Thanks
@@charleswiggins9184 thank you brotha, If you don't mind answering one last question. I work around water a lot. is this IPX rated?
@@gomezx6056 water resistant but has not been tested to depth.
Thank you for the info, if I could give some input. I definitely recommend some testing. I purchased a Ti unit for lite use but I am around dust/water and now worried if small debris and accidentally dropping in a puddle could cause a malfunction. Again just my humble option. Thanks for your help and time.
@@gomezx6056 You have a warranty, test it and let me know. 🙂
Question, am I able to use a regular triple A battery in the micro
No
@@charleswiggins9184 thanks for the quick response
Hi! How can I get one? Is there a website I can check this out?
Google search and you will find dealers.
Charles love the light. What is the warranty on the light?
If it breaks I fix it. Now if it’s broken due to being abused, the customer will pay for parts. Thanks.
@@charleswiggins9184 I just ordered one. Look forward to using your light sir. Thanks for replying.
Any update on that programming vid, could use a little further elaboration on how to work the programming mode, otherwise love the light, picked up the TAD edition
Look at my channel and the dragon driver. It programs the same.
I got a couple of these coming from TAD, may i know if there are rubber switch cap, and switch available? (Or are they removable without special tools 😊?) I do takecare of my FLs but as the rubber are the ones moving i would like to have some extras as sending them from outside the US would be trouble some.
They are available. Email me please
Рекламируете Американский бренд , так уж будьте любезны произносить его так как его произносят ! Но или хотя бы говорите всю информацию только русскими словами , а то половина английского сленга а вот сам нож с переводом из ГУГЛ;) Цирк!!