For "topping out" you want to increase rebound damping. Really informative video, man. Thank you. I have not had to open mine up but it seems like Begode is incapable of tightening a motor bolt... So it's great to know what I'm in for if I need to get in there. FYI - McMaster Carr is a good source for small quantities of high quality fasteners. They also provide charts and 3D files to help you understand the fasteners' dimensions and other specs.
Wow! You would think Begode would know by now to keep it simple and just have a single side panel. The Blitz has the same type of side panels. Begode has produced enough wheels and should know how to design a proper side panel with good hardware. Excellent video George!!🔥🔥 Thanks for sharing!
Use a Dremel disc and cut your own flathead groove into the screws at that point you can still reuse them with a flathead screwdriver. If you were able to cut a groove, I would try that
If you put more pre-load on the coil it will be pre-sprung and will top-out even harder, topping out is normal though, what problems is that causing you? Also if you didn't apply new loctite and didn't torque the motor screws to a specific torque value (I would go with something like 15Nm on M6 motor bolts) they are bound to become loose soon again.
Just like any begode wheel, needs updated, modified and fixed to make it somewhat right. We all know what we're getting into when you pull the trigger on any wheel. Especially a suspension wheel.
Thought the ET Max was sent back already and you have the GT Pro now ??? I'm going to assume, older video. I know you loved the ET Max though, charged really fast on the Roger Charger. Yeah for $4K, the quality should be High. Quality screws that won't stripe with hand tools... Ride to Live, Live to Ride.
@brianmccann666 yeah im just backed up on video editing , at least 1 more et max video left to come out. alot of the videos you've seen lately are videos shot and edited by nick!
ET Max is not a good wheel, too many issues for so many people. But people spent $4,000 on it so they making every excuse to justify the bad wheel...Ironically the wheel been out only 8 months and already dropped about $1000 in price at most dealers. Even Ewheels dropped the price about $500, That is against EWheels religion to give a discount I had a guy try to justify the ET Max not charging fully 168 volts, saying EUC will cut out when full charged...I guess Inmotion, Leaperkim, Kingsong and even other Begode wheels didn't get that memo...it is BS People come up with all kinds of excuses to justify Begode's bad build quality
Smh, All these newer wheels have more problems than ever!! They are just making way too many and too fast to really focus on quality. This is ridiculous
China can't compete with the quality of US Steel when it comes to creating fasteners, so the hardware companies produce large amounts of low quality hardware to exist as businesses. If the hardware companies stop producing low quality hardware, the hardware companies will no longer exist. Since there is so much low quality hardware available, it does not make sense for USA companies to compete with every different size nut and bolt. As products in China get better, this issue will eventually be addressed, yet I am sure the people who are selling all the poor quality parts, want to keep selling them and do whatever it takes to get in the way of positive change. This is why there are so many inferior parts on earth and "global fastener news" is a website...Fasteners are HUGE MONEY on EARTH!
Very informative video! Thanks for doing this!!!
For "topping out" you want to increase rebound damping.
Really informative video, man. Thank you. I have not had to open mine up but it seems like Begode is incapable of tightening a motor bolt... So it's great to know what I'm in for if I need to get in there.
FYI - McMaster Carr is a good source for small quantities of high quality fasteners. They also provide charts and 3D files to help you understand the fasteners' dimensions and other specs.
Wow! You would think Begode would know by now to keep it simple and just have a single side panel. The Blitz has the same type of side panels. Begode has produced enough wheels and should know how to design a proper side panel with good hardware. Excellent video George!!🔥🔥 Thanks for sharing!
Use a Dremel disc and cut your own flathead groove into the screws at that point you can still reuse them with a flathead screwdriver. If you were able to cut a groove, I would try that
Thanks for the vid, I'm watching the ET Max and Sherman L closely, it's a toss up between them for me and I haven't decided which yet.
Excellent content delivered with style George. Learned lots and look forward to more. Thanks, 6 pac Gord
@@gordmarshall5830 💪
Working on my ex30 and my master is a breeze…..this tear down looked frustrating
nice torqueing noise 💪
@@jimmykiang4420 💦
If you put more pre-load on the coil it will be pre-sprung and will top-out even harder, topping out is normal though, what problems is that causing you? Also if you didn't apply new loctite and didn't torque the motor screws to a specific torque value (I would go with something like 15Nm on M6 motor bolts) they are bound to become loose soon again.
Just like any begode wheel, needs updated, modified and fixed to make it somewhat right. We all know what we're getting into when you pull the trigger on any wheel. Especially a suspension wheel.
Thought the ET Max was sent back already and you have the GT Pro now ???
I'm going to assume, older video.
I know you loved the ET Max though, charged really fast on the Roger Charger.
Yeah for $4K, the quality should be High. Quality screws that won't stripe with hand tools...
Ride to Live, Live to Ride.
@brianmccann666 yeah im just backed up on video editing , at least 1 more et max video left to come out.
alot of the videos you've seen lately are videos shot and edited by nick!
ET Max is not a good wheel, too many issues for so many people. But people spent $4,000 on it so they making every excuse to justify the bad wheel...Ironically the wheel been out only 8 months and already dropped about $1000 in price at most dealers. Even Ewheels dropped the price about $500, That is against EWheels religion to give a discount
I had a guy try to justify the ET Max not charging fully 168 volts, saying EUC will cut out when full charged...I guess Inmotion, Leaperkim, Kingsong and even other Begode wheels didn't get that memo...it is BS
People come up with all kinds of excuses to justify Begode's bad build quality
I still love the wheel 😅
Smh, All these newer wheels have more problems than ever!! They are just making way too many and too fast to really focus on quality. This is ridiculous
China can't compete with the quality of US Steel when it comes to creating fasteners, so the hardware companies produce large amounts of low quality hardware to exist as businesses. If the hardware companies stop producing low quality hardware, the hardware companies will no longer exist. Since there is so much low quality hardware available, it does not make sense for USA companies to compete with every different size nut and bolt. As products in China get better, this issue will eventually be addressed, yet I am sure the people who are selling all the poor quality parts, want to keep selling them and do whatever it takes to get in the way of positive change. This is why there are so many inferior parts on earth and "global fastener news" is a website...Fasteners are HUGE MONEY on EARTH!