Samsung Dryer Door Reversal - How to Change the Door Swing
HTML-код
- Опубликовано: 28 сен 2024
- In this video, I show you how to reverse the door swing on a Samsung dryer. If your door is opening the wrong way, now you will be able to change the way it opens on your dryer.
This is a very simple how to video on dryer repair. Just follow the step by step instructions and you'll have it fixed in no time at all.
If you are not Subscribed to my RUclips Channel, be sure to do that now. Give the video a thumbs up if you like it. I upload new videos every Sunday.
Follow me on Google+
plus.google.co...
Follow me on Twitter
/ applianceguy101
Order Some Parts
bit.ly/Applianc...
Very thoughtful of you to show this sometimes much better than reading instructions and we know instructions can be not so good 😵💫
Bill, thank you for such easy to follow instructions. That project was on my list for 5 months and took only 15 minutes to complete.
thanks bill. your video about the ps for the washer helped alot it was just loose from heavy washing
Thank you for making look so easy and giving concise tips
Great job!!! My screws on one side of the door just came loose with no abuse or anything; so now I can switch the way the door opens and hope it holds.
Did you do it ist work?
Thanks Bill, very clear directions.
Thank you for sharing the experience. I am going to do the same job in Korea.
Just what I needed!
Thanks Marine!!
Simpli Fy
great video bill as always, ontario ca
+Everardo Camacho Thanks!
Really nice videos, thanks!
Thanks for the video it help me
Thank you!
great we just received our pair and those doors are reverse of what we need and I was puzzled how to reverse them, this helps thanks. this helps for the dryer but we have the 2018 door in door washer and for my life I can't think how it will reverse to have that little door where it should be after reversing it?
So what happens if one of the screws is frozen? I tried WD-40 phillips and straight screw drivers. It's not budging but the head is beginning to show damage.
thx
Semper Fi, Dawg.
Can you reverse the washer door too?
Not that I know of.
wanted to pick your brain on a different dryer but don't know how else to get a hold of you. I am a relatively new tech 2yrs and work alone and am scratching my head on a prob. if you'd be willing to give input thad be great here or by text email or whatever. . thanks in advance
+Stacy Newman Let's try it here. What's the problem your having?
Maytag Coin Op Dryer Model # MDE16CSAYW. Original prob squealing. Replaced idler pulley and noise gone. Then could hear a stretching sqeek noise, so replaced the belt and rollers and again that noise gone! After all other noises quiet then there is an obviously struggling motor that turns into slight vibration and gets very loud after appr. 10 min then it goes away then starts again? so after the parts changing monkey ive turned into on this ( even though I tested motor with belt off and seemed fine) I replaced it anyway and to no avail. Drum turns easily and does not seem out of round with a bad seam and no restrictions anywhere that i can see. It sounds electrical like the start winding isn't been taken out of the circuit almost, but I'm not sure what would cause that or if I'm on the right track . the motor just doesn't ever sound completely right after a few minutes. oh the outlet and inputs are all good.. Noises are tough sometimes and very hard for you to decipher through my bable but hoping maybe I've overlooked something simple and rings a bell to you..
+Stacy Newman Private message me your phone number. I might be able to help you out.
+Bill Newberry How did you make out with the dryer? Was it what we talked about?
My switch plate doesn't have any screws on the face plate. Does that mean that it pops out? I'm asking before I potentially break anything. Samsung has been no help with my problem
I've taken the door off but no screws on the latch plate, I think it comes off. But I wanted to know for sure before I attempted to jimmy it off
Johnathan Winfrey read your manual they always have instructions on door swings
thanks bill. your video about the ps for the washer helped alot it was just loose from heavy washing
I wish it were that easy. I took out the screws and now there is nothing to 'screw' them into. in other words, there is no tread for the screws. appears something is missing on the backside of the dryer front.
Can the door be reversed on any Samsung/ Brada washers?
Thanks for Watching Guys! Does anybody have any suggestions for videos on this dryer before it goes out the door? Let me know!
Lol @ "Mystery Screw" that would have absolutely ended up in my magnetic tray. Also, that's a mean looking tattoo.
I think a useful one would be a video showing a continuity test of the element, hi limit & thermostat from the board as well as testing appropriate board voltage output.
Thanks for this brother!
Thanks man. Semper fi