SALDATRICE MULTIPROCESSO YESWELDER MIG 205-D | TEST MIG/MAG/TIG LIFT PARTE 2 | MEHRPROZESS 5 IN 1

VI LASCIO QUI SOTTO IL LINK PER ACQUISTARE QUESTA FANTASTICA MACCHINA MULTIPROCESSO 👇
vi lascio qui sotto il link per acquistare la saldatrice 👇
yeswelder.com/...
🎁codice sconto del 10% (FILFIT10)su tutto il sito yeswelder.com👇
yeswelder.com/...
----------------------------------------------------------
✔🤗SE TI FA PIACERE AIUTAMI A FAR CRESCERE E MIGLIORARE IL CANALE CON UN PICCOLO CONTRIBUTO,GRAZIE MILLE
paypal.me/filf...
-------------------------------------------------------------------------
🎁CODICI SCONTO SUL SITO DEKOTOOLS.COM DEL 12% (CODICE: FILFIT5)
👉SITO DEKO TOOLS:
www.dekotools....
👇VI LASCIO SOTTO I LINK DEL SITO KAIWEETS
15% CODICE SCONTO: FF15🎁
TESTER E PINZA AMPEROMETRICHE 👇
kaiweets.com/c...
-----------------------------------------------------------------------------------------------------
👇SITO YESWELDER.COM NUMERO UNO DELLA SALDATURA
yeswelder.com/...
CODICE SCONTO DEL 10% SU TUTTI I PRODOTTI "FILFIT10" 🎁
---------------------------------------------
IPOTOOLS ,SALDATRICI,PLASMA E QUANT ALTRO QUA SOTTO👇
ipotools.it/?w...
------------------------------------------------
📸PER INFO E CONTATTI: / fil_fit_homemade
✉Email: [e-mail]
#welding
#saldatura
#migmag

[@GB-pk2px]

davvero utile anche questa seconda parte..... grazie

[@davidrossi5776]

Grandiosa recensione come sempre, bravo Fil 💪

[@filfithomemade]

Grazie mille 🙏

[@mapzan5313]

Ho appena acquistato questa saldatrice con la bobina del filo consigliata da Amazon da accoppiarci.
Ma la bobina ha il foro piccolo classico da 15 mm.
Quindi non monta con la puleggia in plastica grande nera.
Sai se posso usarla lo stesso togliendo la puleggia o serve per forza?

[@filfithomemade]

Ciao, togli l adattatore nero grande che serve per le bobine con diametro maggiore come quelle da 5kg ecc. Se lo togli puoi inserire la bobina da 15mm D100 se non sbaglio.

[@yanelihurtado2191]

Serías tan amable de decirme que marca es la antorcia TIG,compre esta misma machina y no se que ANTORCIA comprar, muchas gracias

[@filfithomemade]

Ciao la torcia è una Wp17.

[@uzenicukadakrenemja]

@filfithomemade Hi, I saw all the capabilities in your comprehensive review, thank you. I see on your channel that you have also tested other cheaper brands from amazon (arccaptain etc.). I am new to welding and want a machine that I can do home repairs with, a fence, or some table legs, maybe even something that will be bear loads like a pergola or similar. Which of the machines you tested has the best build quality, will last the longest and is the easiest to use...in fact which of the tested machines would you recommend in the 200€ to 300€ range? Thank you.

[@filfithomemade]

Hi, thanks so much for your comment. I made a video on my channel of the top 5 multi-process welders, see it if you like. Right now any brand is good, be it hitbox, primeweld, YesWelder etc. Maybe in that money range that yeswelder money is the best. Decapower and welding machines are also excellent but the prices are higher.

[@uzenicukadakrenemja]

@@filfithomemade Thank you so much for your reply, I will have a look at the video you mentioned and I have just subscribed to your channel. Take care and keep up the good work. Greetings from Croatia.

[@filfithomemade]

@@uzenicukadakrenemja Thanks to you for your comment and subscription, I'm pleased to share with you my same passion for DIY.
Say hello to Croatia!

[@boubzi95]

Bonjour merci pour belle vidéo, par contre pourriez vous faire une vidéo vite fait sur la présentation et le montage de la torche tig lift ? Merci a vous

[@filfithomemade]

Hi, thank you very much, I'm very happy. My channel is the assembly of the torch with the Pyrex gas saver kit, which is more or less the same process. I'll leave you the link to the video
ruclips.net/video/batpBpVv-Po/видео.htmlsi=3V2gDd2b_MpPPu7D

[@boubzi95]

@@filfithomemade merci, mais moi je voudrais comprendre comment relier une torche tig lift au poste yeswelder "205D" avec le gaz ,car je ne vois pas comment relier la torche wp17 au GAZ ARGON du poste, il n'y pas de sortie gaz tig sur le devant du poste a souder 205D? Je pense que c'est un tutoriel qui pourrait intéresser grand nombre de personnes possédant le multi procédé yeswelder 205D.
En vous remerciant d'avance. Xavier

[@filfithomemade]

@@boubzi95
Then I'll send you the video of the wp17 connected to the parkside which uses the same principle for all of them, the gas tube is integrated into the lift torch😉
ruclips.net/video/oHAqDU4VM7I/видео.htmlsi=Ly06sXRPt-cNpS7D

[@boubzi95]

​@@filfithomemadeun grand merci a vous, maintenant je comprends mieux 👌car avec le service client YESWELDER on reste sans réponse. Du coup je m'aperçois qu'il faut changer le connecteur de la torche tig en 35/50 ,sauf si vous le vendez en 35/50 directement ? dommage que rien n'est expliqué a ce niveau,bref merci encore et bonne vie a vous