Your explanation and illustration on the use of PLAN SWIFT to take off MEP has been so satisfying and educative. Power points and key tools needed were all explained to details. Thanks so much, this has been very helpful.
Glad to see your feedback. I have started a Complete Quantity Surveying Programme is available on RUclips for Construction Professionals by following NRM2 (RICS) with PlanSwift Software. 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟲 Foundation / Earthwork Quantity Takeoff ruclips.net/video/Ucm-FYI4Ad4/видео.html 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟳 Rate & Material Analysis for Earthwork ruclips.net/video/ST_tpFp9PjU/видео.html 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟴 Concrete Column Quantity Takeoff ruclips.net/video/Eu3vdsXD5lo/видео.html 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟵 Slab & Beam Quantity Takeoff ruclips.net/video/VG8nI6UyeHI/видео.html 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟭𝟬 StairCase & Lintel Quantity Takeoff ruclips.net/video/kWbwvBAspqE/видео.html 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟭𝟭 Rate & Material Analysis for Concrete ruclips.net/video/K9WLzdhrvVI/видео.html
Did you watch the Complete Quantity Surveying Programme, which is available for Construction Professionals by following NRM2 (RICS) with PlanSwift Software? 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟲 ruclips.net/video/Ucm-FYI4Ad4/видео.html
The same way we highlight horizontal. Either we depend on Schematic Diagram or section but we have to highlight somewhere. For more questions, feel free to contact me through social media applications. Links are given in the description.
We have measured smoke sensor in GF drawing and excel sheet automatically updated. How can we update the same quantity for second floor in the same excel cell.?
Continue the same Takeoff item on the Second floor by pressing Green Button. It will merge the Qty. Follow this basic training of PlanSwift for MEP. It will help. ruclips.net/video/nsckp2wHumg/видео.html For more questions, connect with me on Insta, FB & Linkedin.
@@SaadyChohan Can we merge both the quantities for smoke sensors in first floor and second floor where in first it is taken by manually counting and in second floor it was taken by autocount. Please clarify.
Did you watch the Complete Quantity Surveying Programme, which is available for Construction Professionals by following NRM2 (RICS) with PlanSwift Software. 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟲 ruclips.net/video/Ucm-FYI4Ad4/видео.html
YES, You can use it for Estimation, Planning & QuantitySurveying etc. As long as your concern is to measure something from the drawings, PlanSwift is helpful.
Thanks for watching. Dear, It was just a demo video to show how PlanSwift works. We should consider all the riser and vertical takeoff in the same way I have shown. And I have started a Complete Quantity Surveying Programme for Construction Professionals by following NRM2 (RICS) with PlanSwift Software. Soon, we will cover MEP as well. Where we will discuss all the aspects. 𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟲 Foundation / Earthwork Quantity Takeoff ruclips.net/video/Ucm-FYI4Ad4/видео.html
Your explanation and illustration on the use of PLAN SWIFT to take off MEP has been so satisfying and educative. Power points and key tools needed were all explained to details. Thanks so much, this has been very helpful.
Glad to see your feedback.
I have started a Complete Quantity Surveying Programme is available on RUclips for Construction Professionals by following NRM2 (RICS) with PlanSwift Software.
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟲
Foundation / Earthwork Quantity Takeoff
ruclips.net/video/Ucm-FYI4Ad4/видео.html
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟳
Rate & Material Analysis for Earthwork
ruclips.net/video/ST_tpFp9PjU/видео.html
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟴
Concrete Column Quantity Takeoff
ruclips.net/video/Eu3vdsXD5lo/видео.html
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟵
Slab & Beam Quantity Takeoff
ruclips.net/video/VG8nI6UyeHI/видео.html
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟭𝟬
StairCase & Lintel Quantity Takeoff
ruclips.net/video/kWbwvBAspqE/видео.html
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟭𝟭
Rate & Material Analysis for Concrete
ruclips.net/video/K9WLzdhrvVI/видео.html
Another great demonstration of PlanSwift's pin-point flexibility in Fire Alarm items take-off
Thank you for the positive feedback.
@Patrick
MashAllah Allah blessing you Allah ap ko kamyab kary Ameen
Shukriya!
MasahAllha vary nice and so good dear Saady Chohan Allah Almighty will bless you with happiness and so good
Thank you 😇😇
Regarding cable, How much buffer length can be considered extra for termination ? Say 10% or more?
It Depends.
Contact me if you have questions.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
GREAT! Job thank you, very helpful.
Did you watch the Complete Quantity Surveying Programme, which is available for Construction Professionals by following NRM2 (RICS) with PlanSwift Software?
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟲
ruclips.net/video/Ucm-FYI4Ad4/видео.html
Hi sir. May I ask on how to get the vertical of conduits? hoping for your response. Many thanks .
The same way we highlight horizontal.
Either we depend on Schematic Diagram or section but we have to highlight somewhere.
For more questions, feel free to contact me through social media applications. Links are given in the description.
We have measured smoke sensor in GF drawing and excel sheet automatically updated. How can we update the same quantity for second floor in the same excel cell.?
Continue the same Takeoff item on the Second floor by pressing Green Button. It will merge the Qty.
Follow this basic training of PlanSwift for MEP. It will help.
ruclips.net/video/nsckp2wHumg/видео.html
For more questions, connect with me on Insta, FB & Linkedin.
@@SaadyChohan Thank you ❤️
@@SaadyChohan Can we merge both the quantities for smoke sensors in first floor and second floor where in first it is taken by manually counting and in second floor it was taken by autocount. Please clarify.
As a civil engineer.
Should learn MEP Qs ?
There is no harm to learn. Quantity Surveying is not limited to Civil or MEP. I'll suggest you to learn everything.
Can you do a video for MEP HVAC quantity takeoff by planswift?
Did you watch the Complete Quantity Surveying Programme, which is available for Construction Professionals by following NRM2 (RICS) with PlanSwift Software.
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟲
ruclips.net/video/Ucm-FYI4Ad4/видео.html
I have shown a ducting examples in this video.
ruclips.net/video/nsckp2wHumg/видео.html
dude how can i put auto count? i dont have it on my planswift 10.2 version
This video will help you.
ruclips.net/video/SzrXU_qXhZ8/видео.html
Can we use this software For Estimation ?
YES, You can use it for Estimation, Planning & QuantitySurveying etc.
As long as your concern is to measure something from the drawings, PlanSwift is helpful.
Why don't you take Riser for wiring and conduit
Thanks for watching.
Dear, It was just a demo video to show how PlanSwift works. We should consider all the riser and vertical takeoff in the same way I have shown.
And I have started a Complete Quantity Surveying Programme for Construction Professionals by following NRM2 (RICS) with PlanSwift Software.
Soon, we will cover MEP as well. Where we will discuss all the aspects.
𝗤𝗦 𝗣𝗿𝗼𝗴𝗿𝗮𝗺𝗺𝗲 𝗘𝗣 #𝟲
Foundation / Earthwork Quantity Takeoff
ruclips.net/video/Ucm-FYI4Ad4/видео.html
helpful sw. I am downloading a crack to try it 😁
You can downlod the trial version:
ruclips.net/video/_b_pCaFnzNw/видео.html
It offers a great opportunity to explore Planswift's features.
How to link it with excel
PlanSwift & Excel Integration requires proper installation. Which version of PlanSwift & Excel do you use?
@@SaadyChohan Des this mean without the latest version of excel or planswift, I won't be able to successfully link both softwares?
@@Ovoplus You can still export the sheet.
There is another way but that is very complicated. Soon I will make a video about it. Stay connected.