Lol people dont get it. There was a series of video where men with such saws shown that factory cut on square metal pipes is NOT 90° so you must cut the edge on your own for it to be straight. Thats all
Yes it’s true about factory edge on any manufactured wood product and sheets of drywall, they make sure to remind us every chance they can in carpentry school too!
@@youngwillis9255 lol I’m not sure if your being sarcastic , but just in case the chance your not During the 4 year apprentice ship , here in Canada you do ten months of working in the Feild ( 1550 hours) and then 2 months of in class schooling , theory , trades math and shop class , you must maintain a 65% grade average during the 2 months or you fail and must redo the 155o hours of field work before you can return to redo do the school portion , need 70% to pass the exams. After successfully passing the 4 years you are a qualified journeyman , then you may challenge the red seal test , once passing that your a red seal carpenter.
I don't want to blow your mind, but he probably made a hole in the other side of the can an poured the Cola out. Probably so his whole room wouldn't be sprayed with it.
It’s often said the ends of stock are cut imperfectly and some people don’t trust factory edges. This is a joke like someone takes that logic all the way. Dude don’t even take the soda factory edge. Dude even got circumcised at 30 for it
people got confused because in the video description it says „end“ but in the original videos they said edge.. „never trust a factory edge“ and in the auto text in that original video it said end (a mistake), so I guess that‘s why. Or people haven‘t seen the original and are confused this one exists lol
Dont do this. You should always use the full kerf of the blade when you make a cut. You want the blade to wear evenly. Hence dont trust a factory edge this is why. This is a video of an inexperienced operator seeking attention.
Yeah, I've seen factory cuts that are perfect. It makes sense that a worn blade can make uneven cuts. I guess it depends on the manufacturers tolerance. Yet to suggest we can't make precision cuts is just ridiculous. I've seen cuts so precise that you'd struggle getting a credit card between two ends placed together.
when we were kids in the 70s we took a file and filed the top and removed it and used it for a cup. the top is put on with a machine called a seamer. I don't understand what you're trying to prove. no big deal that the can and the top are separate
For instance when you buy a new sheet of plywood all 4 sides are considered factory edges. If the saw blade is defective it will show in the cut. It will be choppy or not 90° right angle. Does this help?
Lol people dont get it. There was a series of video where men with such saws shown that factory cut on square metal pipes is NOT 90° so you must cut the edge on your own for it to be straight. Thats all
Yes it’s true about factory edge on any manufactured wood product and sheets of drywall, they make sure to remind us every chance they can in carpentry school too!
@kushnastay there was a school? Lmao
@@youngwillis9255 😂
@@youngwillis9255 lol I’m not sure if your being sarcastic , but just in case the chance your not During the 4 year apprentice ship , here in Canada you do ten months of working in the Feild ( 1550 hours) and then 2 months of in class schooling , theory , trades math and shop class , you must maintain a 65% grade average during the 2 months or you fail and must redo the 155o hours of field work before you can return to redo do the school portion , need 70% to pass the exams. After successfully passing the 4 years you are a qualified journeyman , then you may challenge the red seal test , once passing that your a red seal carpenter.
😅😅😅
The thing I couldn't understand the most in this video was why the Coke wouldn't come out of the can even though it was supposed to be unopened.
I don't want to blow your mind, but he probably made a hole in the other side of the can an poured the Cola out. Probably so his whole room wouldn't be sprayed with it.
They stack the cans on pallets, and the original shape getd warped. It's used for consuming, not holding up a building.
Weird logic. What if I smashed your phone and blamed the factory??
It's factory fault that they made a product which you want to smash it. 😂
Your kinda slow aren't you
@@QrazeyOnly slow one here is you = 💅
9 KLM jmjjjnjm😊@@Qrazey
Jesus
Можно просто плоским напильником, аккуратно и красиво будет
You can take any can and open it by doing the exact same thing by running the upper edge across a belt sander.
/concrete
Or, just pull the tab.
Or sitting board and rubbing on a street curb
.@@hdghostrider1403
@@joelcruz9415 Oh, the Obvious Approach. I'd prefer the 1600 hp diesel powered centripetal or maybe the simple .357 can opener. Just sayin'...
Where's the soda?!
🤣
it's probably been drained on the other side.
@@bitfries exactly
ITS POP YOU DEGERERATE
Where's your brain?
You can do that with a butter knife. The cans are so thin.
The one homie in the back of the classroom doing this with his teeth:
Why didn't any soda come out of that can?
Боится.
It was drained out of the bottom?!?
it was scared of the saw
The saw was chugging it faster than wut you could See 🤒
A empty Coke can.Not soda.
This is a parody of another video which is clear to me that most of the comment section hasn't seen.
Explain
It’s often said the ends of stock are cut imperfectly and some people don’t trust factory edges. This is a joke like someone takes that logic all the way.
Dude don’t even take the soda factory edge.
Dude even got circumcised at 30 for it
A rare footage of an unstoppable force not meeting an immovable object
Gear ⚙️ blades don't seem to be that sharp and precise 👍🏻
My new way of opening cans. I never liked those tabs anyway
people got confused because in the video description it says „end“ but in the original videos they said edge.. „never trust a factory edge“ and in the auto text in that original video it said end (a mistake), so I guess that‘s why. Or people haven‘t seen the original and are confused this one exists lol
Guarantee you that can is more dimensionally stable than your jig holding the can or even the travel and alignment of the chop saw
The complicated way to open the coca cola can
"My dewalt chop saw is far more precise then a lazer cut": every half assed reno guy.
My Dewalt chop saw is....oh...you're right!
I think using the original ring to open it is more practical
First one looked straighter if im honest, yur cuts the crooked one 😂
Excellent hands and sight, in case it's done this way, and not with other more sophysticated machinery. (Sorry if I wrote wrong...) ❤
We took social media too far these days😢
It was probably drained from the bottom. Or it would of been foaming and spraying.
😅
Quicker if you just pull the tab 🤷🏾♂️
Not the double-bonded seam 😭
You got ripped off, that can was empty!😂
Ух ты! У меня от восторга чуть глаза не лопнули! 🤓😜
Nada más le tallas un poco con una lima y sale la tapa, no hay necesidad de hacer eso tan peligroso.
Nichts geht über einen praktischen Büchsenöffner
Dont do this. You should always use the full kerf of the blade when you make a cut. You want the blade to wear evenly. Hence dont trust a factory edge this is why. This is a video of an inexperienced operator seeking attention.
Yes, this is true
Yeah, I've seen factory cuts that are perfect.
It makes sense that a worn blade can make uneven cuts. I guess it depends on the manufacturers tolerance.
Yet to suggest we can't make precision cuts is just ridiculous. I've seen cuts so precise that you'd struggle getting a credit card between two ends placed together.
What many people usually do not understand is where the opener did go.
And why is this the end of the factory?
the opener is your biggest concern? whered the drink go!?
Am i the only person who feels like something will get into my eyes
Not sure if losing my tongue on a Coke is what im actually looking for, but thanks anyway...
Bro doesnt show the results, only this vid haves one 😢
Maybe your miter saw is off ?
Cadê o líquido?
Это тот случай когда у баночки оторвалось кольцо для открытия 😂😂😂
I can do this with my trusty can opener. No power saw needed. The blade on the saw can cut aluminum a quite easily. It wont damage the blade.
「この機械があれば建設マスターは職を失うでしょう」
？？？
Just rub the top on a belt sander
🤔🤔🤔 I dunno..... That saw can't fit in my Cooler?👀 So, I think I'll just keep using the "Pull Tabs" 😂🤣
when we were kids in the 70s we took a file and filed the top and removed it and used it for a cup. the top is put on with a machine called a seamer. I don't understand what you're trying to prove. no big deal that the can and the top are separate
А куда делась кола из закрытой банки?
Выпили, через дно 😅
Now do it with a Full Can of Coke.
So, where's the soda?
Can someone explain to me what happens at the end of a factory and/if/or this is it
For instance when you buy a new sheet of plywood all 4 sides are considered factory edges. If the saw blade is defective it will show in the cut. It will be choppy or not 90° right angle. Does this help?
That vice level?
Can moved of course cut is not straight.
Спасибо за полезное для конструктора видос.
Why'd you ruin someone's blade cutting that?
You won't ruin a carbide insert blade cutting Aluminium.
Why would that ruin any blade. Ignorant.
at least its not a can crushing factory, that job must be soda-pressing (*buh dum shhh*)
Shit went right in my eye
Where is Cokacola
С открывашкой для консерв будет лучше .
You can open that can by pulling the tab! Duh!
Итак чему это было показано?
Use a Forrest blade
Empty?
So why dident pop come out
Мне бы такую в дом 😢
I dunno.. seems within the margin of your holding apartus
平ヤスリで擦れば直ぐに取れる😊
I just watched a coke can catch a fade🔥
Excellent job!
Show me doing a full can😂😂😂😂😂
Kaltenbach ...et les superbes lames ...
.à tout couper ...en série et a l équerre ....a part le rebord d' appui de la scie quand c'est neuf !!
Makita la mejor yo la tengo con disco de diamante para materiales ferrosos
You wanna know how I got these scars?
Hell of a pipe lol
Станок изготовлен правильно. В рф таких не делают.
А ГДЕ ЖИДКОСТЬ? 😮
I know this thing from 1995
How AI opens a pop
What about the factory beginnings... can we trust those?
Wieder ein Unsinn Reel
Y para que haria esto?? Expliquen..
Вот так надо правильно открывать 😂
Ou est le liquide ?😂
And the purpose for this video. 10 seconds wasted of my time
That will work to 😂
No mames ase 35 años yo lo asia con la banqueta de mi canton tallandole un buen rato jajaj
Why?
What's the point of that video?!
No recycling
No Coke😂
I’m not impressed I can do the same thing holding a Skil saw in one hand and a beer can in the other😂😂 after six beers😂😂
Hold my beer!
aka +/- tolerance, resolution
Guys wake up it’s all commercial for Coca-Cola , drink water 💦 be healthy CR 7
誰がなにを知りたいのだろうか？
Mere aankh Mai Gaya 😢😢😢chilka
Sin asunto
??????
😊
Скільки перевели банок?
And your point ??????
重點要有人用
منشار دقيق في القطع
You broke it
ما شاء الله يا ماشا❤❤❤❤❤😂
Saludos ❤️ 😊
POV never trust a factory esge
Your point is?