Lol people dont get it. There was a series of video where men with such saws shown that factory cut on square metal pipes is NOT 90° so you must cut the edge on your own for it to be straight. Thats all
Yes it’s true about factory edge on any manufactured wood product and sheets of drywall, they make sure to remind us every chance they can in carpentry school too!
@@youngwillis9255 lol I’m not sure if your being sarcastic , but just in case the chance your not During the 4 year apprentice ship , here in Canada you do ten months of working in the Feild ( 1550 hours) and then 2 months of in class schooling , theory , trades math and shop class , you must maintain a 65% grade average during the 2 months or you fail and must redo the 155o hours of field work before you can return to redo do the school portion , need 70% to pass the exams. After successfully passing the 4 years you are a qualified journeyman , then you may challenge the red seal test , once passing that your a red seal carpenter.
Dont do this. You should always use the full kerf of the blade when you make a cut. You want the blade to wear evenly. Hence dont trust a factory edge this is why. This is a video of an inexperienced operator seeking attention.
Yeah, I've seen factory cuts that are perfect. It makes sense that a worn blade can make uneven cuts. I guess it depends on the manufacturers tolerance. Yet to suggest we can't make precision cuts is just ridiculous. I've seen cuts so precise that you'd struggle getting a credit card between two ends placed together.
For instance when you buy a new sheet of plywood all 4 sides are considered factory edges. If the saw blade is defective it will show in the cut. It will be choppy or not 90° right angle. Does this help?
Lol people dont get it. There was a series of video where men with such saws shown that factory cut on square metal pipes is NOT 90° so you must cut the edge on your own for it to be straight. Thats all
Yes it’s true about factory edge on any manufactured wood product and sheets of drywall, they make sure to remind us every chance they can in carpentry school too!
@kushnastay there was a school? Lmao
@@youngwillis9255 😂
@@youngwillis9255 lol I’m not sure if your being sarcastic , but just in case the chance your not During the 4 year apprentice ship , here in Canada you do ten months of working in the Feild ( 1550 hours) and then 2 months of in class schooling , theory , trades math and shop class , you must maintain a 65% grade average during the 2 months or you fail and must redo the 155o hours of field work before you can return to redo do the school portion , need 70% to pass the exams. After successfully passing the 4 years you are a qualified journeyman , then you may challenge the red seal test , once passing that your a red seal carpenter.
😅😅😅
Weird logic. What if I smashed your phone and blamed the factory??
It's factory fault that they made a product which you want to smash it. 😂
Your kinda slow aren't you
@@QrazeyOnly slow one here is you = 💅
9 KLM jmjjjnjm😊@@Qrazey
Jesus
You can take any can and open it by doing the exact same thing by running the upper edge across a belt sander.
/concrete
Or, just pull the tab.
Or sitting board and rubbing on a street curb
.@@hdghostrider1403
This is a parody of another video which is clear to me that most of the comment section hasn't seen.
Explain
Where's the soda?!
🤣
it's probably been drained on the other side.
@@bitfries exactly
ITS POP YOU DEGERERATE
Where's your brain?
Guarantee you that can is more dimensionally stable than your jig holding the can or even the travel and alignment of the chop saw
Можно просто плоским напильником, аккуратно и красиво будет
Why didn't any soda come out of that can?
Боится.
It was drained out of the bottom?!?
it was scared of the saw
The saw was chugging it faster than wut you could See 🤒
A empty Coke can.Not soda.
Dont do this. You should always use the full kerf of the blade when you make a cut. You want the blade to wear evenly. Hence dont trust a factory edge this is why. This is a video of an inexperienced operator seeking attention.
Yes, this is true
Yeah, I've seen factory cuts that are perfect.
It makes sense that a worn blade can make uneven cuts. I guess it depends on the manufacturers tolerance.
Yet to suggest we can't make precision cuts is just ridiculous. I've seen cuts so precise that you'd struggle getting a credit card between two ends placed together.
What many people usually do not understand is where the opener did go.
And why is this the end of the factory?
My new way of opening cans. I never liked those tabs anyway
It was probably drained from the bottom. Or it would of been foaming and spraying.
😅
I can do this with my trusty can opener. No power saw needed. The blade on the saw can cut aluminum a quite easily. It wont damage the blade.
What about the factory beginnings... can we trust those?
Это тот случай когда у баночки оторвалось кольцо для открытия 😂😂😂
First one looked straighter if im honest, yur cuts the crooked one 😂
You got ripped off, that can was empty!😂
at least its not a can crushing factory, that job must be soda-pressing (*buh dum shhh*)
Why'd you ruin someone's blade cutting that?
You won't ruin a carbide insert blade cutting Aluminium.
Why would that ruin any blade. Ignorant.
I think using the original ring to open it is more practical
Bro doesnt show the results, only this vid haves one 😢
🤔🤔🤔 I dunno..... That saw can't fit in my Cooler?👀 So, I think I'll just keep using the "Pull Tabs" 😂🤣
Am i the only person who feels like something will get into my eyes
Not the double-bonded seam 😭
A kerf was just enough to square it up.😂
Quicker if you just pull the tab 🤷🏾♂️
Cadê o líquido?
Just rub the top on a belt sander
Now do it with a Full Can of Coke.
Maybe your miter saw is off ?
So, where's the soda?
Guys wake up it’s all commercial for Coca-Cola , drink water 💦 be healthy CR 7
А куда делась кола из закрытой банки?
Выпили, через дно 😅
「この機械があれば建設マスターは職を失うでしょう」
???
Show me doing a full can😂😂😂😂😂
Станок изготовлен правильно. В рф таких не делают.
Excellent job!
I just watched a coke can catch a fade🔥
Nichts geht über einen praktischen Büchsenöffner
You can open that can by pulling the tab! Duh!
How AI opens a pop
Use a Forrest blade
Спасибо за полезное для конструктора видос.
Nada más le tallas un poco con una lima y sale la tapa, no hay necesidad de hacer eso tan peligroso.
I’m not impressed I can do the same thing holding a Skil saw in one hand and a beer can in the other😂😂 after six beers😂😂
Hold my beer!
No Coke😂
And the purpose for this video. 10 seconds wasted of my time
Hell of a pipe lol
Can someone explain to me what happens at the end of a factory and/if/or this is it
For instance when you buy a new sheet of plywood all 4 sides are considered factory edges. If the saw blade is defective it will show in the cut. It will be choppy or not 90° right angle. Does this help?
С открывашкой для консерв будет лучше .
Вот так надо правильно открывать 😂
I dunno.. seems within the margin of your holding apartus
You wanna know how I got these scars?
Where is Cokacola
I know this thing from 1995
Can moved of course cut is not straight.
Ух ты! У меня от восторга чуть глаза не лопнули! 🤓😜
POV never trust a factory esge
That will work to 😂
No mames ase 35 años yo lo asia con la banqueta de mi canton tallandole un buen rato jajaj
That vice level?
А ГДЕ ЖИДКОСТЬ? 😮
What's the point of that video?!
So why dident pop come out
Итак чему это было показано?
Empty?
Wieder ein Unsinn Reel
I don't find what he's doing funny
??????
😊
Kaltenbach ...et les superbes lames ...
.à tout couper ...en série et a l équerre ....a part le rebord d' appui de la scie quand c'est neuf !!
Guys its a joke😂😂
Dk wins Purple Heart 💜 tan tank🎉🎉🎉🎉
Y para que haria esto?? Expliquen..
Coco cola boycott
平ヤスリで擦れば直ぐに取れる😊
Ou est le liquide ?😂
ما شاء الله يا ماشا❤❤❤❤❤😂
Saludos ❤️ 😊
And your point ??????
Why?
aka +/- tolerance, resolution
Now what?
You broke it
hêr bijî Kurd û Kurdistan🇹🇯🇹🇯🇹🇯🇹🇯🇹🇯🇹🇯🇹🇯
Your point is?
Good to know
🇹🇯🇹🇯🇹🇯KURDISTAN🇹🇯🇹🇯🇹🇯
Sin asunto
Chile 🇨🇱
منشار دقيق في القطع
Скільки перевели банок?
Quando eu era criança fazia isso apenas ralando a latinha na calçada 😂😂😂
重點要有人用
why
ジャリメ
И зачем?
🤷🤷🤷🤷nu înțeleg.
Нечем заняться ?
#کوردستان🇹🇯🇹🇯🇹🇯🇹🇯🇹🇯
#kurdistan🇹🇯🇹🇯🇹🇯🇹🇯🇹🇯