*I was able to use the stop to cut my pieces all the same **MyBest.Tools** Only let the blade come to a complete stop before lifting it back up otherwise it might 'catch' the work and inadvertently move the stop. Used a second clamp for holding.*
Awesome! Finally one I can actually understand and do myself. I really like the way it turned out..Thank you for making this video..Seriously, I've looked at so many and none are as easy to follow as this one.
@@plywoodworking ooww berarti bisa yaa om..soalnya saya mau buat kaya gini pake cordless cuma cari riview yg bisa miring ko adanya base plat dipotong/diholangin kan sayang..hehe Thanx om..
@@plywoodworking oh bgtu om, iya niatnya mw nyari lg cs buat tablesaw, lg lirik ryu cma kek nya bgtu, pengenya si hitachi lg, tp mahal hahah. Oke om makasih
Saran jgn pake ryu gk bs presisi klo yg tipe bru skr klo yg lama msh bgs yg bru miring baseya, klo agk enak pke maktec aj lmyam cm emg harga agk mhl dikit
This is for explain HMR www.sinkwarehouse.com.au/blog/what-is-hmr-board-why-it-is-best-material-for-your-bathroom-vanity-cabinet/ Maybe wrong picture on web but the explain right
@@plywoodworking my point is : i would like to see a DIY tool making project using cheap, simple basic tools that almost everyone already has..After all isn't that the reason one would choose to MAKE the tool rather than BUY one?If one can afford to have all these power tools at his disposal, it does not make good sense to make another.Just buy one and save yourself time and labor.
@@junfabi1 i think almost all woodworking have table saw, that standart tools, DIY or from factory. all material easy for found and very cheap. on this video i use cheap powertools for build this. i think if i use router maybe you can change with cheap trimmer or etc. this video only give some inspiration and guide for build you . tha my point!!!
*I was able to use the stop to cut my pieces all the same **MyBest.Tools** Only let the blade come to a complete stop before lifting it back up otherwise it might 'catch' the work and inadvertently move the stop. Used a second clamp for holding.*
thank you very much!!!
Süpersiniz beğenerek hayranlıkla sizi izliyorum 🥇🙋🏻♂️👍👏
Awesome! Finally one I can actually understand and do myself. I really like the way it turned out..Thank you for making this video..Seriously, I've looked at so many and none are as easy to follow as this one.
Thank you, glad easy if easy to understand, hope can give some inspired
Лайк и большое спасибо за интересное видео и интересную конструкцию! Она мне очень понравилась, поэтому ещё и подписка на ваш канал.
thank you hope always give inspired
im in love with the way you have a cad model made so you can know how to make it
thank you hope can give some inspired
Sangat keren dan inspiratif
Thank you Jarvis, for this great project. You did it again, breaking the limit.
Your welcome brother👍👍
Mantap bosku....sukses selalu. Ijin ide buat contekan project di workshopku bos 😁
Siap, sng bgt klo bs ksh inspirasi & bermanfaat
Thank you for sharing with your know-how,
Your welcome hope can give inspired
Great
thank you very much!! sorry for late reply
Good job sir. Anyway, can I used exactly to 2"X 6" without modification? Thank you
Yes, you can
what software tool are you using for the illustrations ?
Autodesk 3D max
Om ini bisa buat potong miring gak pisaunya ?? Jadi kaya mitersaw gitu 30° - 45 °...
Untuk versi ini bs cm agk ssh mas klo potong bevel coz cs yg pake krng bagus am presisi potong 45°
@@plywoodworking ooww berarti bisa yaa om..soalnya saya mau buat kaya gini pake cordless cuma cari riview yg bisa miring ko adanya base plat dipotong/diholangin kan sayang..hehe
Thanx om..
Amazing graphic layout
Thank you hope can give inspired
sir you really deserve more subscribers,try investing in more outreach
Thank you, I will
ditunggu Upgradenya seperti chanel nya gokmen altuntas.
Klo buat kyk gitu rugi mas abisya kisaran hampir 1 jtan drpd itu beli yg idj jdi aj😅
Love your work...
thank you, hope can give inspired!
Ancen jos bosku 👍
Makasih mas
Стружкой не забиваются шариковые направляющие?
sometimes but all work properly.
Cuma mau tanya CS nya om, itu ryu kan ya? Ko pas motong kek nya debu nya ambyar bgtu om? Pdhl kn ada lubang pembuangannya ya om?
Iya bnr merek ryu tp yg seri lama bkn yg bru,coz yg bru kualitasya jelek, ya begitulah gk terlalu fungsi fitur debuya, ttp msh kmn2, aplgi cover bwhya dilepas tambah ambyar
@@plywoodworking oh bgtu om, iya niatnya mw nyari lg cs buat tablesaw, lg lirik ryu cma kek nya bgtu, pengenya si hitachi lg, tp mahal hahah.
Oke om makasih
Saran jgn pake ryu gk bs presisi klo yg tipe bru skr klo yg lama msh bgs yg bru miring baseya, klo agk enak pke maktec aj lmyam cm emg harga agk mhl dikit
Kerennn goood.
maksih banyak
O My Gods 👍
Thank you
Hi man ... Please explain mewhat IS HMR ... I ak from Slovakia and i cant find nothing about it ..
This is for explain HMR
www.sinkwarehouse.com.au/blog/what-is-hmr-board-why-it-is-best-material-for-your-bathroom-vanity-cabinet/
Maybe wrong picture on web but the explain right
So IT means thay hmr IS kind od plastic Board ?? ... How i Can find IT on my country ??
У мебельных направляющих большой люфт...
Thank you very much
can anyone please tell me what HMR means?
this is for ecplain hmr www.sinkwarehouse.com.au/blog/what-is-hmr-board-why-it-is-best-material-for-your-bathroom-vanity-cabinet/
@@plywoodworking THANK YOU VERY MUCH
Your welcome
The title of the video is different with the title in the thumbnail
Thank you for remind me
Salah judul ya mas?
Iya mas udh aq ganti maklum blm isitrahat dri kmrn lembur kerjain ini.
Makasih banyak mas
If you needed all these expensive power tools just to make one...what's the point?
maybe you need this tools what about the others, i just give simple solution maybe need need this tools
@@plywoodworking my point is : i would like to see a DIY tool making project using cheap, simple basic tools that almost everyone already has..After all isn't that the reason one would choose to MAKE the tool rather than BUY one?If one can afford to have all these power tools at his disposal, it does not make good sense to make another.Just buy one and save yourself time and labor.
@@junfabi1 i think almost all woodworking have table saw, that standart tools, DIY or from factory. all material easy for found and very cheap. on this video i use cheap powertools for build this. i think if i use router maybe you can change with cheap trimmer or etc. this video only give some inspiration and guide for build you . tha my point!!!
Keren rek ...
Siap