Excelente tutorial , las sierras de corona revisadas al máximo , gracias por compartir tanta información y experiencias , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🛠️🔝
If you're making a knob and using a drill press, back the center drill out a bit so that your knob doesn't have a hole in the front. The drill only needs to extend past the hole saws when hand-drilling a hole, for proper, steady alignment.
Como sempre as melhores invenções vem de fora do Brasil. Não pelos criadores daqui, mais sim pela ganância do governo que não dá incentivos para os micros e pequenos empreendedores.
감사합니다 Thank you so much for watching. It's a song called Christmas 8 in an editing app called ‘Vllo’. So maybe it's hard to find. Always be with good luck and love. 💚🍀
This can happen if you do it with a hand drill. In fact, it was also successful in making it with a hand drill, but it was not uploaded in the video because it was unstable. Thank you 😊 Have a nice time 🍀
I was thinking the same but I feel like if you don't run the RPMs up without load, it won't be an issue. The axial load when cutting at a relatively lower feed rate probably distributes the imbalance enough to make it a non issue. I feel like you can hear it a little bit when he speeds up the feed rate though.
You don't need very much wood. Takes very little for those little projects he just showed. You can easily do everything he did in the video with one single 2x4
Muchas gracias por enseñar estos "pequeños" grandes conocimientos,que como aficionado a la carpinterìa,le agradezco tanto,ya que nos entusiasma para seguir haciendo cosas que nos apasiona,muestre màs cosas que sean bàsicas para un amante de la madera,gracias y saludos.
its just fun for watching. and he just playing with any tool he have. like a 3rd ages of children watching another children playing "How to build a cube with Lego"
А я то думаю чего мне в жизни не хватало, это колечек. Теперь я счастлив.
Спасибо 😊 Хорошего дня 🍀
Ну,да!Полная хренотень!
What a waste of time!
@@user-by2yt5ru9p Разнообразие и художественная жилка и будет применение.
@user-by2yt5ru9p
*The pattern would be help to a novice.
* The hole 🕳 saw without the pilot drillbit -OMG- gave me "HIVES" 👀
I can't believe how many people haven't ever heard or seen a hole saw before when it's such a basic simple and beginner Carpenter tool
Thank you 😊 Have a nice time 🍀
Kommentare bitte in deutsch
공구의 활용을 잘하시네요
역시 새각하는게 다르네요
멋진 아이디어 와 영상감시합니다
잘보고갑니다 ~~
감사합니다~ 💚🍀👍 좋은 밤되세요
매번... 검은별님의 창의적인 시각에 많이 배웁니다.
감사합니다~ 우드님
날씨가 좀 풀려야 우드님 작업하시기도 좋으실텐데… 항상 안전 작업하세요 💚👍😊🤜🤛
R1
ruclips.net/user/shortsp0_Nwp3z6g0?feature=share
Чего только не придумают когда делать нечего! 😀
Спасибо 👍💚😊 Хорошего дня 🍀
감사합니다.
항상 감사드립니다~ 🎁💚👍
Excelente tutorial , las sierras de corona revisadas al máximo , gracias por compartir tanta información y experiencias , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🛠️🔝
Gracias 🇪🇸💚💚🇪🇸 😊 Que tengas un buen día 👍🍀👌
Yo ni siquiera sabía que existían
Would look neat pouring colored epoxy into the first piece example when it still had the concentric circles intact
Thank you 👌👍😊 Have a nice time 🍀
And jewelry box! I'll build and introduce myself. Thank you for this brilliant idea.
Thank you 💚👍😊 Have a nice time 🍀
Thank you for sharing your video. Watching with full support from Canada 🇨🇦.
Thank you so much 💚🇨🇦😊 Have a nice time 🍀
@@BStarCrafts you’re welcome 🙏.
혹시 천재인가요? 멋진 아이디어 입니다
에구 별말씀을요… 😊😊😊
오늘도 멋진 하루되시고 화이팅입니다. 💚👍😊🎁🙆
@@BStarCrafts 00000000000⁰0p
브랜드에서 판매되는 제품이죠.
This is a great video. Never thought this can be accomplished with that tool. Thank you. Excellent craftsmanship 👌🏻❤️.
Thank you 😍🤜🤛👍😊 Have a nice time 🍀
I'm not sure how I ended up on a Korean wood working channel, but I enjoy it. I'm actually visiting Korea now. It's an amazing place
Welcome to Korea 🇰🇷💚🍀👋 Thank you 😊 Have a nice time 🍀
Que interessante! Quanta criatividade! Nunca pensei em usar minha serra assim! Parabéns!!
Obrigado 😊😊 Tenha um bom dia 🍀
Eu gostei 👍 👍 👍 parabéns!
Obrigado 😊🍀💚👍😊 Tenha um bom dia 🍀
ruclips.net/channel/UCtNsWxcIUteeatruXiVc60g .
If you're making a knob and using a drill press, back the center drill out a bit so that your knob doesn't have a hole in the front. The drill only needs to extend past the hole saws when hand-drilling a hole, for proper, steady alignment.
Thank you 😊 Have a nice time 🍀
Excellent demonstration 👍
Thank you 💚👍🎁😊 Have a nice time 🍀
저도 두개 동시에 끼워 돌려 만들어봤었는데
드릴프레스가 없으니 살짝 삐뚤해지네요^^
역시 발상의 전환 멋지네요~👍
주말에는 항상 공방에 계시나요?
날씨 따뜻해지면 연락을 하고 갈까해서요^^
맞습니다. 핸드 드릴로 정확히 수직으로 내리기가 쉽지 않아요. ㅎ
요즘은 영상 찍을 때만 나가는데 토요일은 그나마 꼭 나가려고 해요. 오다가다 저 보이면 차 한잔 마시러 들어오세요 😊💚🍀🎁
@@BStarCrafts 네👌
Все гениальное просто, отличная идея спасибо за идею. 👍👍👍
Спасибо 💚💚😊 Хорошего дня 🍀
이거보니까 알바할때 사장님이 홀쑈 달라고 했는데 못알아들어서 고무호스 가져다 드린게 생각나네요.
잘보고갑니다
ㅋㅋㅋ 누구나 있을만한 추억이… 😁
항상 멋진 하루되세요 💚👍😊🤜🤛
Nice presentation 👍
Thank you 🎁👍😊 Have a nice time 🍀
Nice to know it’s not just east coast US with such quickly grown pine it might as well be balsa…
Como sempre as melhores invenções vem de fora do Brasil. Não pelos criadores daqui, mais sim pela ganância do governo que não dá incentivos para os micros e pequenos empreendedores.
😊 Que tengas un buen día 👍🍀👌
Someone’s had time on there hands to play in the work shop.I can see a crazy build coming up in that mind of yours
Thank you 👍💚💚💚💚😊 Have a nice time 🍀
Very nice Very interesting. A pleasure . Thank you for these Peaceful ideas.
Thank you 💚👍😊🤜🤛😊 Have a nice time 🍀
888888
보면 볼수록 천재라고 느낍니다..
과찬… 감사합니다 😊😊😊😊
오늘도 멋진 하루되세요 💚👍🍀🎁
Beaucoup d'idées avec une si petite chose 👍👨🦽💨
Merci. 💚🎁👍 passe une bonne journée 😄🍀
Die Ideenvielfalt bei solchen Videos ist einfach toll.
Danke 😊 Schönen Tag 🍀
Very good & clever!. Thank you
Thank you 😊 👍💚 Have a nice time 🍀
Спасибо за идею!
Спасибо 💚😊 Хорошего дня 🍀
Очень интересно
А на кой нужныдеревянные цилиндры?
Мдаааа....с такого материала....
That’s a good idea 👍 좋은 생각이야
감사합니다 😊👍💚😊 좋은 하루 되세요 🍀
Très bonnes idées 😊👍
💚💚💚💚💚😊👍🍀🎁
Merci. passe une bonne journée 😄🍀
ZA STA CEMU SLUZI ?
Génial
Merci pour se partage 👍
Merci. 💚👍 passe une bonne journée 😄🍀
ruclips.net/channel/UCtNsWxcIUteeatruXiVc60g .
Браво,маэстро!👏👏👏👏👏👍👍👍
Спасибо 😊 💚 Хорошего дня 🍀
Complimenti! hai una genialità creativa!
Grazie. 😄👍 Buona giornata 🍀🍀🍀🍀
Хорошая идея!
Спасибо 👍💚💚💚😊 Хорошего дня 🍀
ruclips.net/channel/UCtNsWxcIUteeatruXiVc60g .
alatnya canggih
Terima kasih 😊🇮🇩Semoga harimu menyenangkan 👍🍀👌
@@BStarCrafts can u speak indonesian language??? 😊😊
terimakasih
당신은 매우 전문적입니다
감사합니다 😊😊😊 멋진 하루되세요 🍀💚🎁
Супер, отличные идей.
Спасибо 💚👍😊 Хорошего дня 🍀
Muy bien y ingenioso gracias bendiciones éxito
Gracias 👍💚😊 Que tengas un buen día 👍🍀👌
Where do you get the holder for the saws?
Thank you
I searched for a hole saw set on the internet and bought it. (Hole saw set 7p)
Have a noce day 🍀💚😊
I have hole saws but how do you get the holder?
Bravo, guarda con no cortar la base del taladro también
Thanks for the video. What song is playing? I love those chords, very soothing!
감사합니다 Thank you so much for watching. It's a song called Christmas 8 in an editing app called ‘Vllo’. So maybe it's hard to find. Always be with good luck and love. 💚🍀
Veramente bravo un saluto da un collega dall Italia 🇮🇹
Grazie. 🇮🇹😄👍 Buona giornata 🍀🍀🍀🍀
very interesting tutorial,
Nice for sharing 👍❤️
Thank you 💚😊 Have a nice time 🍀
Hi.....! Very beautiful idea....! Where can I get this hole saw drill bit. Thank you for video.
Search for 7psc hole saw set in Google 🎁 😊 Have a nice time 🍀
@@BStarCrafts thank you so much.
C'est super bon travail
Merci. 💚👍🎁 passe une bonne journée 😄🍀
이런 홀쏘 뭐로 검색해야할까요?
좋네요
목공홀쏘 5p로 검색하시면 나옵니다.
좋은 저녁되세요 💚🎵😊
Bravissimo, complimenti!
Grazie. 😄👍 Buona giornata 🍀🍀🍀🍀
Show de bola muito legal idea maravilhoso
Gracias 💚💚💚💚😊 Que tengas un buen día 👍🍀👌
Amazing idea. Best regards from Brazil.
Thank you 😊 🇧🇷 Have a nice time 🍀
회집에서 사용조아요
감사합니다. 횟집에서도 가능한가요? 😊😊 좋은 하루 되세요 🍀
Thanks for sharing 👍
Thank you 👍👍👍👍💚😊 Have a nice time 🍀
Спасибо, очень интересно
👋👋💚💚😊 Хорошего дня 🍀
중간에 살짝 그을리는건 출력이 모자라서 그런건가요?
보통은 타는 건 드릴이 힘이 약하거나 아니면 톱날이 마모되었거나… 인데 아마 톱날이 안 좋아서 그런 거 같아요. 당시에 확인해 보지 않아서 그냥 추측일 뿐입니다. 휴일 잘 보내세요~~^^
@@BStarCrafts 오 김사합니다 ㅎㅎ
별말씀을요. 항상 좋은 하루되세요~ 😊
Alhamdulillah, Amazing technique. Bi idnillah bi qudratillah bi iradatillah bi rahmatillah bi'aunillah billah. Amin 🤲🙏
SALAMET JAYA MENANG
Hatur nuhun~ Wilujeng akhir minggu. 🤜🤛👍🍀💚
감사합니다~ 멋진 주말되세요.
Genial!Bem pratico ,será que aqui no Brasil encontro dessa pra comprar.Gostei muito!
Obrigado 😊🇧🇷💚💚🇧🇷😊 Tenha um bom dia 🍀
Já adquiri no MercadoLivre, há 2 anos atrás.
@@sidneycamacho885 obrigado, , me ajudou muito!valeu!
@@sidneycamacho885 amigo, qual o nome do encaixe?
Good vid. Certainly something I'd have never have thought of . !! thks
Thank you 😊 🙆💚💚 Have a nice time 🍀
Cuídate las manos gracias bendiciones
🤜🤛👍💚🎁🍀
Невры успокаивать..
Покрутил, повертел и
Вот весьма хорошо
Excelente trabalho!
Obrigado 😊💚😊 Tenha um bom dia 🍀
ruclips.net/channel/UCtNsWxcIUteeatruXiVc60g .
Where do we get one of those? I've only seen the cup style!
Search for 7psc hole saw set in Google 😊 Thank you 😊 Have a nice time 🍀
Genuinely curious if you can use a hole saw to make a White oak bottle stopper.
Well… It is possible, but the sealing power seems to be lower than that of cork. Thank you 😊 Have a nice time 🍀
А шесть режущих элементов нужно обязательно?. Думаю 2-3 достаточно!
Isn't it problematic that the blades cause an imbalance and thus wobble?
This can happen if you do it with a hand drill. In fact, it was also successful in making it with a hand drill, but it was not uploaded in the video because it was unstable. Thank you 😊 Have a nice time 🍀
I was thinking the same but I feel like if you don't run the RPMs up without load, it won't be an issue. The axial load when cutting at a relatively lower feed rate probably distributes the imbalance enough to make it a non issue. I feel like you can hear it a little bit when he speeds up the feed rate though.
The possibilities are endless.
Thank you 👌👌👌👍🤜🤛😊 Have a nice time 🍀
Very nice
Thank you 👍💚😊 Have a nice time 🍀
I've had that tool bagging around my shop for years and never realized what you can do with it. So thank you very much Sir. Ps. I liked and subscribed
Thank you 💚💚💚💚😊 Have a nice time 🍀
فكرة رائعة شكرا
شكرا 😊😊 أتمنى لك نهارا سعيدا
감사합니다 😊😊 좋은 하루 되세요 🍀
쿠독 좋아열 홀쏘 어디제품인가요
안녕하세요. 보쉬 제품이긴 한데… 브랜드만 받아서 만들어 파는 거 같아요. 보쉬 홀쏘라고 치면 여럿 나올겁니다. 항상 좋은 하루 하루되세요~👍💚🤜🤛👌😊
*EXCUSEME MY FRIEND* THNKS FOR SHR1NG VIDEO 👍
Thank you YouTukang 😍💚👍😊🍀
What the name of the "hollow screw" for the wooden handle are you using?
Are you asking for a ‘hex wrench bolt’?
😊 Have a nice time 🍀
@@BStarCrafts actually not.. I'm about that tricky "bolt/nut" at 5:29. I've never seen this before
AHA… It is called pupa nut in English. 😊
사용 하시는 홀쏘가 어떤 재품인지 알고 싶습니다.
가능 하시면.. 구매 좌표도 부탁 드립니다.
울프크래프트와 보쉬 두 종류를 사용하고 있는데 울프크래프트가 두꺼운 모재 타공하기에 더 좋은 거 같습니다. 링크는 자동 삭제되니 울프크래프트 6pcs 로 검색하시면 됩니다. 😊
很聰明
請問 鉅片怎麼固定?沒固定好蠻危險……
谢谢😊 🙆祝你有美好的一天🍀
Qual a utilidade desse cerviso 🤔🤔 alguém sabe?
🧐🤔🥴
@@user-ji1dy2tq1f e aí Russo doído, firme e forte na vodka 💪
Que top 🤗🤗🤗🤗
Gracias 💚😊 Que tengas un buen día 👍🍀👌
ruclips.net/user/shortsp0_Nwp3z6g0?feature=share
Hi where can I buy multi layer hole saw like that. Thank you
I searched for a hole saw set on the internet and bought it. Thank you 😊 Have a nice time 🍀
Super easy to find on Amazon or ebay or any hardware or lumber store
That's a cool idea But.Need a lot of wood and A Hole saw ..Which I don't have😂...would try in future
👍👌
Thank you 😊 Have a nice time 🍀
You don't need very much wood. Takes very little for those little projects he just showed. You can easily do everything he did in the video with one single 2x4
Muchas gracias por enseñar estos "pequeños" grandes conocimientos,que como aficionado a la carpinterìa,le agradezco tanto,ya que nos entusiasma para seguir haciendo cosas que nos apasiona,muestre màs cosas que sean bàsicas para un amante de la madera,gracias y saludos.
Gracias 😊 Que tengas un buen día 👍🍀👌
its just fun for watching.
and he just playing with any tool he have.
like a 3rd ages of children watching another children playing "How to build a cube with Lego"
Thank you 😊 Have a nice time 🍀
good 👍
감사합니다~ 좋은 밤되세요 👍💚🍀😊🤜🤛🎁
Это интересно.
Спасибо 😊 Хорошего дня 🍀
おい!あなたのアイデアは刺激的です、ありがとう! 私はロシア出身です。日本語が書けないので、グーグルの訳が間違っていたらごめんなさい)))
Спасибо, я не японец, я кореец. Переводить не только японский, но и корейский непросто. Желаю всегда удачи и любви 👍💚💚💚🍀🍀🍀🤜🤛😊🇰🇷
@@BStarCrafts О, извини! 😁 Просто я не разбираюсь в иероглифах. Корейские, японские или китайские для меня выглядят одинаково 😄
все в порядке. Меня тоже очень смущают русский, украинский, кириллица и т.д. 😁😊🙆👍💚
@@BStarCrafts Такое ощущение, что ты очень хорошо знаешь русский язык)
good 😃🇧🇷
Thank you 🇧🇷💚😊 Have a nice time 🍀
Bosch North America will always fail simply because they do not have this drill press here.
Alternate title: How to make Bamboo pen stand from wooden blocks.
Thank you 😊 Have a nice time 🍀
more concerned why the dust collector doesn't have enough suction to pick up the saw dust with out having to literally stick it to the table
Genial,como siempre
Gracias 😊 Que tengas un buen día 👍🍀👌
Я не очень люблю такие пилы, высок риск травмирования вылетевшей из-за ненадежного крепления. Но, если осторожно, то можно работать.
Спасибо 😊 🍀🎁💚
I've used the same kind for 20 years and never even came close to injury from one and neither has any of my employees over the years.
Exellent job and idea!
Thank you 😊 Have a nice time 🍀
요제품 저렴한 중국산 보루방으로 돌리면 큰톱니 하나로 따기도 버겁습니다. 출력 좋은 보루방에 쓰시는게 좋아요.
감사합니다 😊😊 좋은 하루 되세요 🍀
Nice!
Thank you 🤜🤛🎁😊 Have a nice time 🍀
잘 봤습니다 😊👍
감사합니다 😊💚💚💚😊 좋은 하루 되세요 🍀
Cảm ơn bạn chia sẻ clip hay và ý nghĩa , Rảnh ghé nhà mình uống trà nhé cả nhà
cảm ơn. 🤜🤛💚👍🇻🇳😄 Chúc một ngày tốt lành 🍀
GENIUS
Thank you 💚👍😊 Have a nice time 🍀
👍👍👍
💚💚💚💚💚👌😊🍀
так и не догадался сделать кружку. обычно кружка получается.
Спасибо 🎁👍😊 Хорошего дня 🍀
Intéressant
💚👍🍀😊🤜🤛🙆
Супер👍🏻!!
Спасибо 😊💚👍 Хорошего дня 🍀
Para hacer eso no era más sencillo sacar las piezas en el torno y luego vaciarlas con el taladro de pedestal.
Gracias 😊 Que tengas un buen día 🍀👌