great job I just got one and I plugged it into the van and I thought it was broke and did not know I had to set it up first Thanks to you I now know how to do it
Fuel system status "CL" means Closed as in closed loop, not clear. It will change to "OL" or closed loop once vehicle has been cranked and off of high/cold start idle.
I bought the newer model 629, I have a 2019 Nissan frontier, I have Airbag/srs alarm blinking but when I scan it says no DTC, it doesn't detect any fault?
Can it be changed to sae or standard readings instead of the metric readings yours is showing? Is in your temps were showing in °C I would want °F. Your intake air temps showed 40°C which actually would be 104°f.
@@royzcustomz OK! I really wanted to know why I have a machine that just isn't opening the diagnostics on the vehicle and it says communication failure with the ECU. Why am I welcomed?
Hey bruh, I got my Launch OBD2 529 Scanner C-reader, about a couple days ago. Do you think I should go online, and update my device software, or is it updated already, and just ready-to-use?🙂
Just wondering, i got the same device and did all the steps you did but when i plug the 529 into my gmc yukon all i get is red X all across.Is there more software i need to install?
Hey Chuck, After l plugged mu CR529 in, l realised l hadn't turned the ignition to on.... Then it began reading. Hope yours is working now too. Kind regards Chuck.
I believe it is on the package. I believe it's the serial number. I don't even have this unit anymore. It's a good little unit for what it is. I've had a few other people ask me about this unit and I don't remember having a registration number for mine.
Thanks for this Royz, good tutorial. Tried updating the reader per your instructions but when I clicked on update tools for the 529 I got a error code 403, which means I'm forbidden to enter page. i'm wondering if it's because I'm in Aussie. thanks again!
Not really sure because it directed me right to the sight I needed. Not sure if there's an option for Aussie. There should be a drop-down menu for the region.
I don't have a computer kinda pissing me off now I have to find someone with a computer I don't understand why it doesn't come updated !!! I use my phone no need for a computer anymore!!!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
great job I just got one and I plugged it into the van and I thought it was broke and did not know I had to set it up first Thanks to you I now know how to do it
Thanks for the great review. My 529 is up a ready to use!
Thank you it worked great your clear instructions made it possible
Thanks for the walk through on this.
You're welcome
Fuel system status "CL" means Closed as in closed loop, not clear. It will change to "OL" or closed loop once vehicle has been cranked and off of high/cold start idle.
Thanks for your review Roy. Helpful and straight forward.
👍🌈🌏💞
You're welcome
Thank you for helping me
Great video. Thank you
Is there a version similar in price to this that does abs, relearns, bidirectional etc? Probably asking a lot lol
I haven't found one, those ones are usually pretty pricey.
I bought the newer model 629, I have a 2019 Nissan frontier, I have Airbag/srs alarm blinking but when I scan it says no DTC, it doesn't detect any fault?
Will this work on atvs if I bought one
I don't think so
Hello, which cheap device can work to change ODO meter readings?
Can it be changed to sae or standard readings instead of the metric readings yours is showing? Is in your temps were showing in °C I would want °F. Your intake air temps showed 40°C which actually would be 104°f.
Idk. I didn't get that deep into it
And I wanted to know how many types of vehicle brands the launch cr529 accepts?
Idk there is no list on the web site or in the box. To be honest I was kind of disappointed in that.
@@royzcustomz OK! I really wanted to know why I have a machine that just isn't opening the diagnostics on the vehicle and it says communication failure with the ECU. Why am I welcomed?
@@biatrizmequemeque4184 have you updated it on the web site?
Hey bruh, I got my Launch OBD2 529 Scanner C-reader, about a couple days ago. Do you think I should go online, and update my device software, or is it updated already, and just ready-to-use?🙂
Yes it has to be updated. Go to the web site and follow the instructions in the video 🙂
@@royzcustomz Thanx bruh.🤙🏻
@@AlexzanderMega no problem
Just wondering, i got the same device and did all the steps you did but when i plug the 529 into my gmc yukon all i get is red X all across.Is there more software i need to install?
I didn't see anything other than what I downloaded for the unit. Once I updated the unit it worked just fine for me.
Hey Chuck,
After l plugged mu CR529 in, l realised l hadn't turned the ignition to on....
Then it began reading.
Hope yours is working now too.
Kind regards Chuck.
Are you able to see mis fires on a graph with this? Got a 2014 versa that’s misfiring
It's not on a graph but you can see them in live data
Does it support renault cars? Like duster,mengan or whatever it name is,dies it support renault cars? Yes or no? Pls reply to me
Does it read trans. Fluid temp?
No
Greetings colleague! Do you know if this scanner would help me program keys to cars?
No it will not
Have you updated since then?
Nope haven't had to.
Ignition coil live ?
Faulty ignition coil
After selecting device upgrade it asks for my email & registration code and my CR529 did not come with a registration code. Where can I find it?
I believe it is on the package. I believe it's the serial number. I don't even have this unit anymore. It's a good little unit for what it is. I've had a few other people ask me about this unit and I don't remember having a registration number for mine.
Thanks helped me out setting it up....
You are welcome. Glad to be of help.
Thanks for this Royz, good tutorial. Tried updating the reader per your instructions but when I clicked on update tools for the 529 I got a error code 403, which means I'm forbidden to enter page. i'm wondering if it's because I'm in Aussie. thanks again!
Not really sure because it directed me right to the sight I needed. Not sure if there's an option for Aussie. There should be a drop-down menu for the region.
@@royzcustomz yep there is, directed me to the Aussie site but no 529 in the updates, I'll give them a bell, all the best with your channel mate!
@@backupacc5407 I got mine today, and the site worked for me from Qld Australia. I used the address printed in that quickstart guide.
Does this have misfire counts?
I don't think so.
I bought this obd2 cr529 scan tool and it is not working on my 2009 Toyota Corolla Axio.
it might not cover that car. I know that there are some of the newer cars that it doesn't.
How do register 🤔
This is all you have to do it automatically register's it when you update it.
I got it
lo necesito en español el comentario
If I get one of those I won't sleep at night.
Bought one.....doesn't work for me....keep saying I should check connection....did the update and everything
Well that sucks man. Might have to try and return it if you can't get it working.
greetings illustrious! I have a machine like this but it is not communicating with the vehicle. What can it be?
Por favor reducir al español gracias
Looks like you had a vacuum leak on this car 😃
I got this one and its rubbish, can't detect any codes in my Nissan Qashqai and Pathfinder.
I don't have a computer kinda pissing me off now I have to find someone with a computer I don't understand why it doesn't come updated !!! I use my phone no need for a computer anymore!!!
Computers are kind of outdated but I still keep one just in case I need it at the house.
Lo quiero en Español , gracias .