Outstanding details and instructions for repaired on the trx420. It has been a wealth of information that will be a tremendous help with working on my 2013 trx420. Thanks.
had the same problem, got it sorted all thanks to your video, the regulator was giving the .5 reading but where it should be giving no reading it was giving a 1.7 so something was definitely wrong
My 2008 Rancher 420 has a voltage from the stator of 13.68 on all three. I am guessing that is too low? What should a 2008 TRX420 ES 4x4 be? The output from the rectifier is only 8.98 Volts. to the battery.
What should be the voltage coming out of the regulator rectifier when it's off the machine? Thank you for your video hope to hear from you soon. Also I'm only showing 15 volts coming from the stator at idle when revving it can go up to 35 or more
What might be the problem if it will not start but you move the gear shifter to the left of neutral before you go into reverse and then press the starter and it starts?
I have a Honda 125M I got a new Battery for it I ran it not even a block around my house I parked it for a few minutes it will not start no Neutral light or ignition all dead at this time regulator rectifier not sure what it does I ran a screw driver between the two bolts and I got spark it was trying to start but no go I am running 14.00 volts at this time I checked the fuses they look ok not sure what to check next please Help
What would happen if you miss a line a trx350fm 2006 4x4 swingarm bolt? Would it cause the swingarm bolt to fallout and not torque to spec? And the swingarm bolts are rusty I'm asking because I've went through it and couldn't figure it out
Hands down the best ATV videos iv found.
Probably one of the simplest videos I have seen explaining the testing of the system. Great video.
Glad it was helpful!
Perfectly laid out diagnostics my friend! Your professionalism is Much appreciated .
Outstanding details and instructions for repaired on the trx420. It has been a wealth of information that will be a tremendous help with working on my 2013 trx420. Thanks.
Excellent video. Thankyou for sharing.
Incredibly Helpful! Thanks for the clear and spot-on trouble shooting procedure!
John's the man!!!
God bless you brother for helping us
Have you a vid on changing the stator?
had the same problem, got it sorted all thanks to your video, the regulator was giving the .5 reading but where it should be giving no reading it was giving a 1.7 so something was definitely wrong
Very helpful! Thank you for this explanation!
Thanks for the easy to follow procedure.
Great video John with some very helpful info if I ever have that problem. I'm still waiting on the coolant flush on the Rancher 420!
I second that! I wanna see a coolant flush too!
Thank you so much this was very helpful!
Great video
Thanks great info
I have a 2011 420 Fourtrax. I am getting 15.3 volts on each of the windings. Is that sufficient voltage?
Thanks for the information
My 2008 Rancher 420 has a voltage from the stator of 13.68 on all three. I am guessing that is too low? What should a 2008 TRX420 ES 4x4 be? The output from the rectifier is only 8.98 Volts. to the battery.
Sir you're awesome 👏🏻
Hey Jon will it be the same for a 2008 trx 450 er in having a charging problem i have a new stator and regulator can't figure what to check next
Thanks
What should be the voltage coming out of the regulator rectifier when it's off the machine? Thank you for your video hope to hear from you soon. Also I'm only showing 15 volts coming from the stator at idle when revving it can go up to 35 or more
Did you ever find your issue? At idle I’m only at 15 volts as well from stator.
My 2024 Honda TRX420 Rancher 4x4 has a “knocking” noise when I turn the key on.. I have no idea what to do. I bought 2 or 3 months ago.
What might be the problem if it will not start but you move the gear shifter to the left of neutral before you go into reverse and then press the starter and it starts?
I have a 1997 trx 400 foreman with a charging issue, would the information in this video be relevant for my bike ?
I have the same. Did you determine if it was the same? Thanks a ton.
So my stator is only giving me a reading of 14. Would that be where my issue is?
Cheers mate!
Thanks man
my battery is over charging like 14.8 making my 1993 fourtrax to run bad under load, how to test ?
What does it mean if I still only get 20v a/c with higher rpm's ?
I have a Honda 125M I got a new Battery for it I ran it not even a block around my house I parked it for a few minutes it will not start no Neutral light or ignition all dead at this time regulator rectifier not sure what it does I ran a screw driver between the two bolts and I got spark it was trying to start but no go I am running 14.00 volts at this time I checked the fuses they look ok not sure what to check next please Help
Puede poner un video de como checar cdi honda rancher 420 fm 4x4 2013 gracias
What would happen if you miss a line a trx350fm 2006 4x4 swingarm bolt? Would it cause the swingarm bolt to fallout and not torque to spec? And the swingarm bolts are rusty I'm asking because I've went through it and couldn't figure it out
Tf
I checked the rectifier and I get .467 on the neg side .825 on the pos side
Stator only producing 15.3 volts. Brand new rectifier and battery isn’t charging. Is my stator volts too low?
What did it end up being
Hey hoy mi cuatrimoto no da chispa porque será me puedes ayudar
What it stater is doing 17 out of it
Put it in installing a wench on my 2009 850XP
I have power, but no spark
Probably my issue
My atv shits off when I unplug that wire plug
Same
Have you figured it out yet