I've never sewed a day in my life, but I'm about to start a full Leather Car seat covers re-upholstery project on my older Ford Bronco.. and having watched as many of your videos as I can over the past little while, I cannot thank you enough for teaching some of your secrets and showing how these projects can be done with time, patience, care and attention. You're a master and I think you again for sharing your wisdom. (Now please wish me luck on my project.. haha)
@Cechaflo Thank you, I'm pretty excited to get it started and see how it turns out. Your videos are of an great assistance to help my confidence in it too. 👍
I like watching all your video's thanks for the time that you spent to make them, On this video you have the foot with the guide for topstitch can you tall me were can I get one just like the one you are using look like is in very good quality well made Thanks
www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ www.amazon.com/CKPSMS-Brand-GL-1245-Spring-Side-5MM/dp/B07QHTHCBP www.amazon.com/Sewing-Spring-Industrial-Machines-Multiple/dp/B07GC8DMNX I hope it helps.
Beautiful work. Did you loosen the bobbin tension so the red thread pulled up through the seam? Your pedal control in order to sew slow is impressive. Do you have a smaller pulley on your clutch motor? No way I can sew that slow with a clutch motor. You are a true craftsman and artist!!! I love your videos!
Yes, the thin thread in the bobbin is slightly loose. The thick beige thread remains on top. The 120 needle also helps because it does not make too wide holes in leather. I have done two tricks to slow down the speed of the machine: ruclips.net/video/50wKoaU5ugk/видео.html ruclips.net/video/YDiyffeXleg/видео.html The best option is the use of a servo motor. I would get mine at any moment.
@@Cechaflo thanks for the video! I replaced my Consew CSM 1000 servo motor pulley with a 45 mm pulley and it sews very slow. However I’m sewing Sunbrella marine canvas on a 90 year old Singer 95-40. A Pfaff 1245, a Juki 1542 or a consew 206rb just isn’t in my budget. I’m looking for a Singer 111w155 or 156 to fix up and use. Your videos are the best and you’re craftsmanship is outstanding. If you were to sell courses on boat canvas, I’d sign up in a New York minute. Thank you Sir!!
Should get a auto trimmer friend. catch up with the world. Not only auto lift and trims but does so much more. It will make a better and faster job. I've been sewing on machines for upholstery/canvas and owned a Juki 1510n-7 for 16 yrs now and will never never go back. Owned many machines over the 55 yrs of sewing.
Congratulations on the beautiful work!! Could you talk about the presser foot? Which is using on the pfaff machine. I tried to buy it for myself but the product was diverted. When I was arriving in Brazil. Would you like to send a link for me to buy please . I am Naval Capoteiro and Upholsterer. Grateful. I'll translate here to make it easier for Mr.
The presser foot of the video is for a Durkopp&Adler 767-FA-373 The distance from the center sewing line to the row of stitches is 5 mm. There are left or right side guides. The one for this machine is left side guide. ruclips.net/video/8AT5qDjwMsY/видео.html www.amazon.com/CKPSMS-Brand-GR-1245-Spring-Side- On internet (Amazon, Ebay, Aliexpress, etc.) you can fin this foot for sale. www.amazon.com/Right-Spring-Guide-Presser-Durkopp/dp/B07Z7Q1H5C?th=1 On this other video I show another presser foot for the Pfaff 1245-706- The guide is right. ruclips.net/video/36arEyhfNeE/видео.html www.amazon.com/CKPSMS-Brand-GR-1245-Spring-Side-3MM/dp/B07QJ1R2R9?th=1 You personally have to look for the appropriate link
Unbelievable. Can I ask a question? I'm not entirely satisfied with what I'm using to mark on suede. Everythjing seems to leave residues behind and yoiu know how delicate and finnicky suede is when you so much as stare it the wrong way. What does a really top notch craftsman like you use? (For marking and for cleaning agent)
TBH, I have not done much work with suedes. I like to mark suede with waxed pencils. I like to do a fine line to make the cleaning off easier. I use a liquid called 'washer' here in Mexico. I am not 100% sure but it smells like 'benzine', a cleaning liquid used to clean watches and laundry places to clean stains on clothes. By being aware, suede materials are very delicate then I only trace marks as guides to cut with scissors or a sharpened x-acto. I hope it helps.
Esos pies de presion con guía los venden por internet en Amazon, Ebay, AliExpress, etc. Los hay para diferentes marcas de máquina. ruclips.net/video/8AT5qDjwMsY/видео.html Los torneros también lo pueden fabricar desde cero. www.amazon.com/CKPSMS-Brand-GL-1245-Spring-Side-5MM/dp/B07QHTHCBP www.amazon.com/-/es/Gr367-6-prensatelas-borde-Durkopp-Adler/dp/B07QH96PS7 www.amazon.com/TOP-SEWING-Walking-DNU-1541-DNU-1541S-CONSEW206RB/dp/B07FNFS2F3
Tal como el título lo dice, esto es un trabajo artesanal, el cual creo que solamente se logra con años de práctica y dedicación. Una pregunta, cuál es el # de Walking foot que está usando para french stitch?
@@Cechaflo gracias. Pero creo que no me expliqué bien en mi pregunta, yo quería saber cuál es el número de la pieza que está usted usando en su máquina (Walking foot)
@@TheAdrian1971 Desconozco que número tienen. Simplemente compré el pié con guia para distancia de 5 mm de la guía al centro de uníon de oostura. Venden de varias medidas y vienen con guía izquierda o a la derecha, como uno lo solicite. En este caso fue una sola unidad para Durkopp&Adler 767 con guía a la izquierda. www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
The skiving machine is a Fortuna V 50 leather skiver made in Germany. ruclips.net/video/QVyYC3-Zbug/видео.html The micrometer is a leather caliper used in the tanneries and for leather artisans to measure the thickness of leather material. www.yoycart.com/Product/23249568380/
I am located in Mexico and got a usdd one from a local shoemaker. Hopefully this information is useful: www.techsew.com/us/techsew-sk-4-leather-skiving-machine.html hudsoncutting.com/skiving-machines/ www.n-ccarpet.com/index.php?route=product/product&product_id=728 www.machinio.com/cat/leather-skiving-machine#results Amazon, Ebay, etc. are good sources to find used and new leather skiving machines.
Backstitch is very important at the beginning and at the end or our sewings. I overlooked some of them on this sample. ruclips.net/video/49eAqhLQ0ac/видео.html
The 'Leather Silver Marking Pen' can be easily erased with "white gasoline" (mineral spirits/white spirits). Shoemakers use it a lot here in Mexico. I do not know the composition but its odor is like benzine. I did a demonstration in this other video. min 10:00 ruclips.net/video/MZZu4nB0kJ8/видео.html
In my workshop, when I put on ma leather, and rock to sum Metallica, Delta Parole, Foo Fighters or the Smashing Pumpkins I feel like I can do anything in the whole wide world.
It is a spring loaded center guide presser foot for a Durkopp&Adler 767 ruclips.net/video/8AT5qDjwMsY/видео.html www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
I've never sewed a day in my life, but I'm about to start a full Leather Car seat covers re-upholstery project on my older Ford Bronco.. and having watched as many of your videos as I can over the past little while, I cannot thank you enough for teaching some of your secrets and showing how these projects can be done with time, patience, care and attention. You're a master and I think you again for sharing your wisdom. (Now please wish me luck on my project.. haha)
Good luck with your upholstery project!!!
@Cechaflo Thank you, I'm pretty excited to get it started and see how it turns out. Your videos are of an great assistance to help my confidence in it too. 👍
As a longtime follower I still cannot thank you enough for all I have learned from you.
Thank you so much for taking the time to share your years of experience and craft with the world!
Impeccable. . ..! And in such a good taste...thank you so much !
Dude that skill level is like the gold standard peace and blessings brother
You always have something new, God willing, I am a fan of your videos, good luck to you
Thank you for sharing. Your channel is inspirational. Keep it up!!
Всем здравствуйте. Спасибо за работу! Вы маэсто в кожаной мастерской!
A true master of his craft.
Awesome tutorial, thank you! Your skill is incredible. 😊
I love the background music. 😍😍
I just revisited this video, this is a beautiful technique Maestro!
Beautifull finish!!! Congrats and thank you
Such incredible skill !! 💞
very nice! I can only imagine the amount of time to do an interior using this technique
Thank you, you are so generous.......
excelente video maestro de maestros saludos desde piura perù
Felicidades, excelente trabajo👍
I like watching all your video's thanks for the time that you spent to make them, On this video you have the foot with the guide for topstitch can you tall me were can I get one just like the one you are using look like is in very good quality well made Thanks
www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
www.amazon.com/CKPSMS-Brand-GL-1245-Spring-Side-5MM/dp/B07QHTHCBP
www.amazon.com/Sewing-Spring-Industrial-Machines-Multiple/dp/B07GC8DMNX
I hope it helps.
very creatively clever effect- thanks a lot!
Beautiful 😍 work 💪
Beautiful job!!!
Cool idea!
Beautiful work. Did you loosen the bobbin tension so the red thread pulled up through the seam? Your pedal control in order to sew slow is impressive. Do you have a smaller pulley on your clutch motor? No way I can sew that slow with a clutch motor. You are a true craftsman and artist!!! I love your videos!
Yes, the thin thread in the bobbin is slightly loose. The thick beige thread remains on top. The 120 needle also helps because it does not make too wide holes in leather.
I have done two tricks to slow down the speed of the machine:
ruclips.net/video/50wKoaU5ugk/видео.html
ruclips.net/video/YDiyffeXleg/видео.html
The best option is the use of a servo motor. I would get mine at any moment.
@@Cechaflo thanks for the video! I replaced my Consew CSM 1000 servo motor pulley with a 45 mm pulley and it sews very slow. However I’m sewing Sunbrella marine canvas on a 90 year old Singer 95-40. A Pfaff 1245, a Juki 1542 or a consew 206rb just isn’t in my budget. I’m looking for a Singer 111w155 or 156 to fix up and use.
Your videos are the best and you’re craftsmanship is outstanding. If you were to sell courses on boat canvas, I’d sign up in a New York minute. Thank you Sir!!
Just crazy talent.
Super!!!!!!!!!! Thank you!!!!! Merci!!!!! Спасибо!!!!!
Should get a auto trimmer friend. catch up with the world. Not only auto lift and trims but does so much more. It will make a better and faster job. I've been sewing on machines for upholstery/canvas and owned a Juki 1510n-7 for 16 yrs now and will never never go back. Owned many machines over the 55 yrs of sewing.
Most of these videos are aimed to novices in this trade. They are not for professionals.
Was there a reason the top tension on your seeing machine was so high as to pull the red bobbin through?
The reason is to pull the bobbin red thread upwards to get the visible 'red points'.
Super 👍👍👌
Hello .good job thank so much🎉
Спасибо за видео 👍👍👍
Congratulations on the beautiful work!! Could you talk about the presser foot? Which is using on the pfaff machine. I tried to buy it for myself but the product was diverted. When I was arriving in Brazil. Would you like to send a link for me to buy please . I am Naval Capoteiro and Upholsterer. Grateful. I'll translate here to make it easier for Mr.
The presser foot of the video is for a Durkopp&Adler 767-FA-373 The distance from the center sewing line to the row of stitches is 5 mm.
There are left or right side guides. The one for this machine is left side guide.
ruclips.net/video/8AT5qDjwMsY/видео.html
www.amazon.com/CKPSMS-Brand-GR-1245-Spring-Side-
On internet (Amazon, Ebay, Aliexpress, etc.) you can fin this foot for sale.
www.amazon.com/Right-Spring-Guide-Presser-Durkopp/dp/B07Z7Q1H5C?th=1
On this other video I show another presser foot for the Pfaff 1245-706- The guide is right. ruclips.net/video/36arEyhfNeE/видео.html
www.amazon.com/CKPSMS-Brand-GR-1245-Spring-Side-3MM/dp/B07QJ1R2R9?th=1
You personally have to look for the appropriate link
Merci beaucoup (thanks a lot)
Unbelievable. Can I ask a question? I'm not entirely satisfied with what I'm using to mark on suede. Everythjing seems to leave residues behind and yoiu know how delicate and finnicky suede is when you so much as stare it the wrong way. What does a really top notch craftsman like you use? (For marking and for cleaning agent)
TBH, I have not done much work with suedes.
I like to mark suede with waxed pencils. I like to do a fine line to make the cleaning off easier. I use a liquid called 'washer' here in Mexico. I am not 100% sure but it smells like 'benzine', a cleaning liquid used to clean watches and laundry places to clean stains on clothes.
By being aware, suede materials are very delicate then I only trace marks as guides to cut with scissors or a sharpened x-acto.
I hope it helps.
What make/model is your sewing machine?
Durkopp&Adler 767-FA-373 triple transport sewing machine.
Cool thanks 👍 respect
Buenos días.
Que gran idea! Esos pies para la máquina dónde se consiguen? Muchas gracias
Esos pies de presion con guía los venden por internet
en Amazon, Ebay, AliExpress, etc. Los hay para diferentes marcas de máquina.
ruclips.net/video/8AT5qDjwMsY/видео.html
Los torneros también lo pueden fabricar desde cero.
www.amazon.com/CKPSMS-Brand-GL-1245-Spring-Side-5MM/dp/B07QHTHCBP
www.amazon.com/-/es/Gr367-6-prensatelas-borde-Durkopp-Adler/dp/B07QH96PS7
www.amazon.com/TOP-SEWING-Walking-DNU-1541-DNU-1541S-CONSEW206RB/dp/B07FNFS2F3
Great video
How do I get the skiving machine to buy
Hopefully on this link:
www.n-ccarpet.com/index.php?route=product/product&path=8900_9100&product_id=578
Tal como el título lo dice, esto es un trabajo artesanal, el cual creo que solamente se logra con años de práctica y dedicación.
Una pregunta, cuál es el # de Walking foot que está usando para french stitch?
It is 5 mm from the line of stitches to center guiding edge.
@@Cechaflo gracias. Pero creo que no me expliqué bien en mi pregunta, yo quería saber cuál es el número de la pieza que está usted usando en su máquina (Walking foot)
@@TheAdrian1971 Desconozco que número tienen. Simplemente compré el pié con guia para distancia de 5 mm de la guía al centro de uníon de oostura. Venden de varias medidas y vienen con guía izquierda o a la derecha, como uno lo solicite. En este caso fue una sola unidad para Durkopp&Adler 767 con guía a la izquierda.
www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
@@Cechaflo Gracias por su respuesta inmediata.
Очень понравилось видио.
What is that skiiving machine and long arm micrometer?
The skiving machine is a Fortuna V 50 leather skiver made in Germany.
ruclips.net/video/QVyYC3-Zbug/видео.html
The micrometer is a leather caliper used in the tanneries and for leather artisans to measure the thickness of leather material.
www.yoycart.com/Product/23249568380/
Where would I get this machine for skiving leather to thinner edges?
I am located in Mexico and got a usdd one from a local shoemaker.
Hopefully this information is useful:
www.techsew.com/us/techsew-sk-4-leather-skiving-machine.html
hudsoncutting.com/skiving-machines/
www.n-ccarpet.com/index.php?route=product/product&product_id=728
www.machinio.com/cat/leather-skiving-machine#results
Amazon, Ebay, etc. are good sources to find used and new leather skiving machines.
Is there no need for back stitching to lock it in?
Backstitch is very important at the beginning and at the end or our sewings.
I overlooked some of them on this sample.
ruclips.net/video/49eAqhLQ0ac/видео.html
I don't understand how you removed the gray pencil mark
The 'Leather Silver Marking Pen' can be easily erased with "white gasoline" (mineral spirits/white spirits). Shoemakers use it a lot here in Mexico. I do not know the composition but its odor is like benzine. I did a demonstration in this other video. min 10:00
ruclips.net/video/MZZu4nB0kJ8/видео.html
Good
Ассалаумагалейкум! Названия машины можно, который шьют?
Durkopp&Adler 767-FA-373
How easy you make it seem its almost a optical illusion
شكرا
Best
Ở đâu bán chân vịt này
www.amazon.com/Right-Spring-Guide-Presser-Durkopp/dp/B07Z7Q1H5C
In my workshop, when I put on ma leather, and rock to sum Metallica, Delta Parole, Foo Fighters or the Smashing Pumpkins I feel like I can do anything in the whole wide world.
Amazing work like always! What would you call the tool you used to press the piping flat at 10:50 ?
It is a spring loaded center guide presser foot for a Durkopp&Adler 767
ruclips.net/video/8AT5qDjwMsY/видео.html
www.amazon.com/Spring-Guide-Presser-Durkopp-Adler/dp/B07Z7QHDNZ
♥♥♥
Please tell me the model of your sewing machine Pfaff!
Pfaff 1245-706 Similar to Pfaff 545 H3 or 145 H4
🇹🇷🙋♂️👏👏👍❤️
Please remove the background music, just the sound of you working is beautiful don't spoil it with music. You are good at what you do
I want to see your personal vehicle!
Блин ты крут!!!
يا شباب عبدور على خلطة الباتكس حدى بيعرف كيف بيتحضر بل بيت
Q vale un máquina de esss
Estas máquinas usadas en buen estado están alrededor de 1000 dólares aprox.
Quiero una costure media pulgada de ancho para costear a la par de costura pequeña más para adornar
Pk starlit khusa brand man funky nation speak on mouth .reply must be
Tu dhakosla kar ke dikha raha