I love working on these engines. Even more so than the 66 series because there is no fuel tank in the road. I remember putting a reman engine in a 10 in about 3 hours from start to finish!
Hey man where’d you order the filters from? I found all the fleetguard filters for the 86 series on amazon but never know with places like that. I get a bit nervous on there lol
Good day..Well no wonder it started, it has a John Deere either can on it. lol Boy I wish 574 had some kind pump. I was haybing up hill, tractor sputtered, gauge show 1/2 tank, realize low fuel turned around went down, perfect. Thanks
Hi , do you know if that injection pump has a filter inside ? I have a harvest combine ih 1460 with the same pump , dont want to start by itself , only with a little gas in intake air
Hey man! So today i started my 886 for the first time (Just bought it) and it leeked out of the pump like CRAZY and i think its a seal but it also need linkage work.
hi i have the same injection pump on my 81 s1700 dump truck small fuel leak on the cap where the 6 lines plug into top of pump im wondering what is the big bolt in the middle of the fuel lines im wondering if i can oull the cap and replace the seal? the pump works great dont need rebuilt just a slow leak any help will be appreciated thanks
Great video thanks for sharing. My hand pump leaks on my 1086 to. Is there seal kit a person can get to repair them. I looked online and can’t seem to find one.
I can look into it more. We had a Diesel shop down the road from our shop so we never did anything to pumps. We did test & rebuild injectors, but be hardly ever touched pumps.
PA Farms thanks my hand pump leaks a little when the engine is running so I need to fix it before I have hay laying in the field and the tractor is out of commission.
I did a little digging, I saw they had 2 different pumps available for the 1086 based on the serial number. I’m not sure if you did it or not. I think I would get the model number off the pump and do an internet search on the model for a seal kit?
PA Farms thanks for looking into my hand pump leaking. I’ll get the serial number of the pump and do an internet search latter this week when I’m at the farm. Thanks for info.
May have already thrown the fuel filters out, but would be interesting to see how much crud is collect around 60Hours!! Use a hacksaw and cut around the top of the fuel filter. Dont use a die grinder ahah... Sparks and diesel dont mix hehehe
I would buy some otr truck fuel hose, buy some brass crimps and make my own hose.... I have a complete set of Hydralic crimp dies, or for other types I make my own crimp dies....
Just did the same repair on a 686. Same steps and parts. Thanks for posting.
Thanks for the view 👍🏻
Another good tutorial/how to with plenty of good information. Stay safe.
I need a 06 Tractor to do a video on the fuel system!
I think your 560 & my 806 have similar fuel systems.
I finally see why the tractor runs so good! Nice John Deere starting fluid! Lol
Haha yea it is empty and not hooked up. It was in when I bought the tractor, thought it was kinda funny so I left it in.
good deal you got that done before a break down. i should think about replacing the line on our 15. thanks for the video dont seem that bad of a job.
I love working on these engines. Even more so than the 66 series because there is no fuel tank in the road. I remember putting a reman engine in a 10 in about 3 hours from start to finish!
Hey man where’d you order the filters from? I found all the fleetguard filters for the 86 series on amazon but never know with places like that. I get a bit nervous on there lol
Good day..Well no wonder it started, it has a John Deere either can on it. lol Boy I wish 574 had some kind pump. I was haybing up hill, tractor sputtered, gauge show 1/2 tank, realize low fuel turned around went down, perfect. Thanks
Haha yea it was in the tractor when I bought it. It’s empty and not hooked up. I left it in cuz I thought it was kinda funny
Hi , do you know if that injection pump has a filter inside ? I have a harvest combine ih 1460 with the same pump , dont want to start by itself , only with a little gas in intake air
Thanks I was following along with you on my tractor.
No problem, I’m glad it was useful
The elbow on the pump end of the hose is leaking on my 1586. Did you say that end was NPT? Did you just Teflon tape that end?
Pretty sure it’s pipe. Yea I just used Teflon. It’s been a while since the video and nothing leaking yet
I know this is a bit late but it's rubber to absorb the pulses in the line or it would cause damage.
Hey man! So today i started my 886 for the first time (Just bought it) and it leeked out of the pump like CRAZY and i think its a seal but it also need linkage work.
hi i have the same injection pump on my 81 s1700 dump truck small fuel leak on the cap where the 6 lines plug into top of pump im wondering what is the big bolt in the middle of the fuel lines im wondering if i can oull the cap and replace the seal? the pump works great dont need rebuilt just a slow leak any help will be appreciated thanks
thanks 4 the video. :) this helped so much.. i think i need new fuel filters on my 1586 as it wont stay running.. i think i have water in mine..
Great video thanks for sharing. My hand pump leaks on my 1086 to. Is there seal kit a person can get to repair them. I looked online and can’t seem to find one.
I can look into it more. We had a Diesel shop down the road from our shop so we never did anything to pumps. We did test & rebuild injectors, but be hardly ever touched pumps.
PA Farms thanks my hand pump leaks a little when the engine is running so I need to fix it before I have hay laying in the field and the tractor is out of commission.
I did a little digging, I saw they had 2 different pumps available for the 1086 based on the serial number. I’m not sure if you did it or not. I think I would get the model number off the pump and do an internet search on the model for a seal kit?
PA Farms thanks for looking into my hand pump leaking. I’ll get the serial number of the pump and do an internet search latter this week when I’m at the farm. Thanks for info.
Great video. What's your thoughts on a M
An M would be nice in the collection
Ever thought about removing the ether assist?
It’s not hooked up on any of my tractors, I think the can is empty, no wires going to it.
PA Farms keepin it original lol
Can you make a video on how to turn the fuel yp
Maybe someday I can cover it. It’s a good topic
Ethan Wilson easily done on those pumps
May have already thrown the fuel filters out, but would be interesting to see how much crud is collect around 60Hours!!
Use a hacksaw and cut around the top of the fuel filter. Dont use a die grinder ahah... Sparks and diesel dont mix hehehe
Maybe a good idea. I still have them
I just done the 986 and the 1440 last year. worst part I find is the tank tap it's hard on the fingers lol.
Yea, I hate the ones that are that tight, you end up twisting the end off!!
I would buy some otr truck fuel hose, buy some brass crimps and make my own hose.... I have a complete set of Hydralic crimp dies, or for other types I make my own crimp dies....
Yea that’s the way to do it. I do know some farms that invest in a crimper.
your dealer made that hose!!!
Yikes, tomorrows video doesn't sound very positive! That was a very informative video, though I would love to end you some new gloves!!! lol
Haha, those gloves were New last week, I loaded a lot of hay with them!
Oh man, what did you break now? Lol.
Well I’m not sure I did it. I think the -8 winter did it!