TFL PRINCESS 6S RUN - Did NOT Go To Plan!
HTML-код
- Опубликовано: 13 сен 2024
- Check it out here ➜ goo.gl/HE8gEr
First run for the TFL 1105 Princess brushless RC boat but yeah it didn't go to plan!
Please subscribe ➜ goo.gl/KyaLHP
Follow us on Facebook ➜ / rctanksandtrucks247
/ teamnfgrc
Instagram ➜
/ rctanksandtrucks247
Check out the huge range of cars at Gearbest➜ goo.gl/Upxw1H
If you like the video please give it a thumbs up, share and subscribe for the latest videos.
Any questions please leave them in the comments and I will do my best to answer them.
Make more of these boat vids i love how it drives
Will do 👍
Thx! 💖
I love the Princess
Hi, I have the same rc boat, I go 4s with stock motor and esc. Did you replace the stock motor and esc to be able to go 6s lipo?
Nope, stock
Does something burn after a while, or is it fine even at 6s?
I cooked a 120amp esc on 6s... it was moderately proped at best 180 seems to be much happier with my 42in hull
Nice rip guys. Thats the joys of boating. 👍👍
Thanks
Sweet boat ,incredible performance for a "cruiser "
Thanks, definitely goes well
i`m never bored with your videos man i mean it
Much appreciated bro
Stellar movie homey! Luv the great southern land!
Your prop shaft needs a securing holder underneath at the back.... I can hear it vibrating.... After a while this will cause leaks etc etc
Much appreciated. I will check it out
@@RCTanksTrucks247 yeah just a thought...
Its low down on the rev range that I heard the vibrations most prominent... But it may affect the whole range upon applying throttle...
I've had success applying epoxy resin onto the inside around the prop shaft where it meets the Hull.. . And also with using a prop shaft bracket at the rear on the outside...
Give it a try.... The less vibrations.. The more efficient it will be on the water 👍
Use a prop balancer and sand paper on blade. Look for how to on you tube. Not epoxy. I send my blades out for professional balance, sharpening and polish. (Huge improvement over stock)
@@munkeybiznes I was referring to the prop shaft... Not the prop.....
This is a lightweight vacuum molded Hull.... Prone to vibration from stock shaft.....
Yeah a properly balanced prop will help.... But these cheaper shafts are never great even with a balanced prop.... That's why I tend to add extra epoxy to the shaft casing from the inside of the hull
Each to their own
You guys are great. From Florida US
Much appreciated bro. Glad you like the videos 👍
Sweet ass build there guys... I love this kind of stuff👍👍👍
Cheers bro that's what we wanna hear 👍
Nice looking boat
Totally
Awesome boat and speed test,great video.
Thankyou
Great run. Though you were going to have to swim for it! It moves pretty good
Thanks Tony. I was so lucky that it didn't go under the ferries ☺️
G-day from way up-over!🇨🇦 that boat is sweet! Lucky duck! Loving the content as usual mate!👍👊🍻
Alberta here. Canada needs MORE RCS
True that!
They have rc sparks
Hello 👋 Thanks for watching. Yeah that was a close call 😊
Love RC Sparks Studio!
Please do another bashing of the Streamline Thrasher V2
I don't have one although I would like one
Nice, Lucre seemed to enjoy the drive by wetting. Apart from the grub screw, its got decent performance. I expected slower given its looks.
Yeah it goes really well. You don't expect it to be so fast.
WoooooW very nice amigo
That did go well, lucky to get it to the bank :-)
Haha nearly got caught up in the ferry
How did you seal the hatch to prevent water inside the hull?
Haven't sealed it any different from stock. Small amoun of water comes in but nothing major
@@RCTanksTrucks247 ok. Thanks. Mine was leaking after a few seconds runtime. A lot of water through the hatches. I sealed it just today. Video uploading if you like to see how I did it.
It was quick I'm looking at the Traxxas M41 twin hull
Get the new Proboat Miss Gieco 36 its a much better boat and 75 mph out of the box.
Sweet boat!
5 minutes or so then heat issues in my smaller boat.
Beast 🤘
Cool man 👍
Cheers
Steve!!! Please give us an update on the snrc drr-01. Cheers👋
Done 😁
@@RCTanksTrucks247 Thanks buddy. Absolutely loved those body shells 👍
Wow bellissimo..
Why are boats so much harders on lipos. My udr runs for at least 45 minutes on 6s.? Great vid thumbs way up
Boats always harder on everything even real ones just robs power causes way more wear tear
No wheels all resistance and fighting nature 😆 with other stuff kinda picking your battles
Generally cause you are running wide open throttle
Thankyou all for response
Boats run wot 80% of the time and pull huge amounts of amps compaired to cars.
Anything 32" and up will happily draw 100~150A at wot.
My 41" Zonda twin brushless cat draws +/- 160A for each motor at wot and will spike over 200A getting up to speed.
can you tell me what servo are you using for this rc boat please?
Standard size waterproof car servos
That's a nice lipo checker, what brand and model?
ISDT BG-8S available from Hobbyking or Bangood
@@michaellucre8249 Alright! Thanks. My current one is ok but it's a basic. It's the Venom Pro Lipo Checker
👍ty
Thats some dangerous driving you did.
Nah all good
Loon didnt know she wasnt running at scale speed
But sad that IT broke down little break
All good and a easy fix
How much mate?
Check out the link in the description 👍
mount a handle barr and stick barbie on top of it :-P
Lol
how fast does the boat go
Not sure. Maybe next time I will get the gps and see
A princess just isn`t meant to be run like that, TFL or not..
It`s like flying acro with a 747 :p
The V should be deeper as well, in my oh so super duper honest opinion.
It`s a daycruiser, come on, it should have some weight to it, be a bit sluggish, make some waves and go like 20-35kmh.
Shove 12 NiCd`s in there with a brushed 700 motor and it`ll be juuuuust right :)
(yes I`m old, shut up and get off my lawn!)
Hahaha very true. It looks strange hammering around that quickly.
@@RCTanksTrucks247 loll, I`m a bit of a traditionalist, but a slugish wavemakin yacht is fun to ride as well :)
Did you grease the shaft prior to 1st run?
Yeah man, sure did
It shows! Screaming!
Do you have Traxxas UDR? If so do you like it?
Yeah man, great car. Something a little different
RC Tanks & Trucks 24/7 I am just about convinced to get one! BTW Traxxas sells a rear diff for it now.
A yacht
'
i have 2 R/C boats are firehawk and traxxas villain
Nice 👍
私も6セルで走ってるよ!
レーシングクレージークルーザーだよ!!
goo👍
Sound like flexwire needs grease.
It was greased before the run
Were you going duck huning? Dont retire your tug boat just yet.
Haha close, I think the duck shit itself
TFL measures this at 96CM it's no way near that long. Why do they have to lie about the figures..
🤔 Not sure
Too bad the person with all the information can hardly be heard. Looks like it was a fun time.
It was fun. It's hard to hear me as I don't have a microphone attached to me.
mine is faster on 4s. get rid of the plastic prop and bring the batteries back a bit.
Mate the prop is not plastic.
@@RCTanksTrucks247 sorry saw it at the end this time...