Hi Rajvir really enjoy your Omron videos, are there any more? I have used the cp1 unit. would like to see how to connect a quadrature encoder to the CP1 and program the high speed counter. thanks for the videos
Your logic design makes electrical troubleshooting extremely difficult. In my industry all switches are wired normally open. and pressing it passes power/common depending on positive/negative wiring logic. By wiring your switches in normally closed it takes much longer to find a loose connection. If every button is Normally open you can quickly check with a meter without opening the prints to troubleshoot. We would use our reset in the latch branch because it resets the latch and is not a condition to turn on the coil. It just makes it easier to read.
Jeremy Adair if all the switched are NO then all the switches contain a relay to on and off the system and. I also work in electrical and electronic industries
Dear Kamal, there are Timer tutorials available in paid course. Would you like to explore it? Here is the link: www.udemy.com/nfi-plc-online-leaning/?couponCode=Website2016
+Magnus Ewerlöf Dear, there are 230+ Video lectures in the full course. Please check the curium before buying here: www.udemy.com/nfi-plc-online-leaning/?couponCode=nfiautomation_website
sir kindly continue the topic, please discuss about time and counters, hoping i will learn more for my project which deals running 2motor alternatively for 1hour during day time and 3motors for night time, thanks in advance and God Bless
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Dir can you please video for plc comparison
Hi Rajvir really enjoy your Omron videos, are there any more? I have used the cp1 unit. would like to see how to connect a quadrature encoder to the CP1 and program the high speed counter. thanks for the videos
Hello Jon Stafford - I never tried encoder with Omron PLC. But sooner would be adding a video tutorials on that. Stay Tuned to our channel.
Your logic design makes electrical troubleshooting extremely difficult. In my industry all switches are wired normally open. and pressing it passes power/common depending on positive/negative wiring logic. By wiring your switches in normally closed it takes much longer to find a loose connection. If every button is Normally open you can quickly check with a meter without opening the prints to troubleshoot. We would use our reset in the latch branch because it resets the latch and is not a condition to turn on the coil. It just makes it easier to read.
Jeremy Adair if all the switched are NO then all the switches contain a relay to on and off the system and. I also work in electrical and electronic industries
Thanks sr
Very very helpful video
Gud One Rajvir.....keep refreshing with such fundamentals.......thanks......
Your welcome Ajay!
I cannot find lesson 4
Hello mr Rajvir . how to configure the inputs to the encoder and which block use? you could make a video lesson on this
+Johnny Almeida Rodrigues We will make a lesson on Encoder soon. Thank you for feedback.
thanks for listening.
where is lesson 4
Rajvir,
The questions should use the word "Devise" instead of "Device". Devise a circuit that comes on when.....
Love your videos so much. thanks.
Thank you Ronald for your concern in the word "Device". Appreciate you!
sir I have a problem on TIM command on my CP1E ... please help me...how to us timer output to work?
Dear Kamal, there are Timer tutorials available in paid course. Would you like to explore it? Here is the link: www.udemy.com/nfi-plc-online-leaning/?couponCode=Website2016
Hello mr Rajvir, Is there more tutorials with cx-programmer in the online course? im more then happy to purchase the course if it is.
+Magnus Ewerlöf Dear, there are 230+ Video lectures in the full course. Please check the curium before buying here: www.udemy.com/nfi-plc-online-leaning/?couponCode=nfiautomation_website
sir, I want to complete the paid online version of the course. I mailed you as well. Waiting for your reply.
Hello, kindly send email at codeandcompile@gmail.com. Thank you for your feedback. Subscribe for more upcoming videos :)
@@thegeterrdone already bought ur course sir...and daily learning from your videos
How can i get the software of omron plc license free
There is no license free software
Rajvir Singh sir from where i can get this software because i need 64 bit version
Hi, I am having CP1E-NA-20DR.. In cx programmer which address i need to put to get the analog data from 90 ch and 91 ch.. thanks in advance
Ram Subbu I can tel you if you can share the manual of this PLC please at nfiautomation@gmail.com
I got it ya. . Thanks for your reply
sir kindly continue the topic, please discuss about time and counters, hoping i will learn more for my project which deals running 2motor alternatively for 1hour during day time and 3motors for night time, thanks in advance
and God Bless
Hey Baby Nash - We have complete course of 150+ video tutorials for $49 available at www.nfiautomation.org. !
what is memory bits in s700
You mean M1400? as Micrologix 1400?
Rajvir Singh Simatic S1400
Sorry, i have no idea.
finally getting to the place where I start need some help, and he stopped makeing them :(