Thank you Greg! I couldn't not have installed this without your video. Your 11:52 video only took me two hour +/- to complete! But I did it! Thanks again!
I haven't installed the little buddy yet, definitely will reference this video . First i have to figure out why the back bar is hitting the machine. Seems too low. Sigh.
We are happy to hear that this video will be helpful to you when you set up your Little Buddy Kit. In the meantime, if your back bar is too low and seems to be touching the bed of the machine, you may need to raise the side arms up another hole to life the entire frame area to give you clearance for the machine bed. Hope this helps. :)
You should be able to purchase a Little Buddy Kit through a Handi Quilter stockist. If you contact www.stewmac.co.nz/ they should be able to let you know your nearest Handi Quilter dealer. :)
We have installed the frame. Now we bought an extra hand wheel. We can’t get the end plug out to install plug for hand wheel. Suggestions???? Thanks for help.
You just have to pull really hard to take the end cap off which holds the pole into the cradle. Then from there it is a spanner to loosen off the nut and then you pull the end cap off.
Very helpful! Being a visual person, videos always help! Mine should be delivered in a day or two and I'll be ready to go!
Thank you Greg! I couldn't not have installed this without your video. Your 11:52 video only took me two hour +/- to complete! But I did it!
Thanks again!
I haven't installed the little buddy yet, definitely will reference this video . First i have to figure out why the back bar is hitting the machine. Seems too low. Sigh.
We are happy to hear that this video will be helpful to you when you set up your Little Buddy Kit. In the meantime, if your back bar is too low and seems to be touching the bed of the machine, you may need to raise the side arms up another hole to life the entire frame area to give you clearance for the machine bed. Hope this helps. :)
Thank you!! Video was a life saver!!
That is great to hear the video helped!
Where can I buy these parts parts for this machine in New Zealand please
You should be able to purchase a Little Buddy Kit through a Handi Quilter stockist. If you contact www.stewmac.co.nz/ they should be able to let you know your nearest Handi Quilter dealer. :)
Really helpful
Glad it helped :)
SUPER!
Thank you! Cheers!
We have installed the frame. Now we bought an extra hand wheel. We can’t get the end plug out to install plug for hand wheel. Suggestions???? Thanks for help.
You just have to pull really hard to take the end cap off which holds the pole into the cradle.
Then from there it is a spanner to loosen off the nut and then you pull the end cap off.
@@HandcraftersHouse thanks. We got it!!!