I appreciate the effort and hard work you put into that video, I feel confident and getting this done now except for possibly the rear spacers because they may be different
those studs just pound out with a hammer the strut supports studs dont need to be cut off . plus this tool make doing springs really easy . lol i can do these lift kits in less than 2 hour now since done so many at my repair shop since specialize in samurais and tracker and sidekicks . Rod's Suzuki Repair and Machine Shop Parker az
Are the strut spacers and front coil spacer 2 inch or is it 1.5? cause I'm planning on fabricating my own using steel and I have no clue on wether to make it 2 inches up front or just 1.5 inches
Man u sound like you're really working hard. i Didn' t see you disconect the steering and sway bar. Or do the rear.I was actually looking for a bidy kift soacer instal video. Interesting
You all probably dont care at all but does anybody know of a way to get back into an instagram account? I somehow forgot the password. I would appreciate any help you can give me!
@Rex Juelz Thanks so much for your reply. I got to the site on google and I'm trying it out atm. Seems to take a while so I will get back to you later with my results.
I've never seen a break line be pulled so hard you could of removed the calliper would of made it alot easier as your break line was holding everything up
I appreciate the effort and hard work you put into that video, I feel confident and getting this done now except for possibly the rear spacers because they may be different
Use a jack to compress one end of the axle up and it will lower the other end down.
those studs just pound out with a hammer the strut supports studs dont need to be cut off . plus this tool make doing springs really easy . lol i can do these lift kits in less than 2 hour now since done so many at my repair shop since specialize in samurais and tracker and sidekicks . Rod's Suzuki Repair and Machine Shop Parker az
I'm going to be out that way for RTR in January. Could you tell me the best set up for my Tracker if I swing by?
Are the strut spacers and front coil spacer 2 inch or is it 1.5? cause I'm planning on fabricating my own using steel and I have no clue on wether to make it 2 inches up front or just 1.5 inches
Man u sound like you're really working hard. i Didn' t see you disconect the steering and sway bar. Or do the rear.I was actually looking for a bidy kift soacer instal video. Interesting
What size garage is this? I looking to build one for like size vehicles.
Did you use struts for a geo or them other 5 or so vehicles that will fit and they are 2 inches longer but u gta slot the struts. ??? Thanks!
That whoah killed me
do you have 4`` kit link?
What about camber?
its only 2inch so its no gona effect
My camber not lining up with the 2 inch don't know how to fix it
@@ronniemohammed4988camber bolts. Easy peasy.
@@1ring2rule3pigs it didn't work
Why do you have to remove the snap rings?
Looks way Easier then i thought it would be.
Yeah I was surprised too.
Can you write the inner and outer diameters of the vitara upgrade kit? thank you.
If I do a 5inc body lift and use spacers for the suspension is it ok ?
Muchas gracias x enseñar a levantar el vitara saludos Chile 🇨🇱
You all probably dont care at all but does anybody know of a way to get back into an instagram account?
I somehow forgot the password. I would appreciate any help you can give me!
@Beckham Otis instablaster ;)
@Rex Juelz Thanks so much for your reply. I got to the site on google and I'm trying it out atm.
Seems to take a while so I will get back to you later with my results.
@Rex Juelz it worked and I actually got access to my account again. I'm so happy:D
Thanks so much, you really help me out !
@Beckham Otis glad I could help xD
Whats the most inches can u do on one without changing anything? I have a 04 chevy tracker. And im thanking of a 4 inch lift will it work?
I'm think 2 inches on the spacers
does it fit on 95 sidekick ?
Did you need to replace the original coils?
no, just add the spacers
Thanks
Will that work on a geo tracker?
I #geo and chevy trackers so it will pop up on those. Yes it's the same thing.
Do we need to take the hub apart if its the automatic hub?
Yes
@@BudgetPowerGarage i just got my lift for the 2nd gen plan to start on it Friday
So did you ever finish? Wheres the Shot of the Lifted Vehicle?
Plenty of videos of it lifted.
forgot to mention you gatta drill out the lower strut mount holes for the shitty angle of the front tires after installing that kit
I did mines yesterday and the camber isn't lining up at all the top is way outside don't know what to do to fix it
Whats with the breathing already???
I was fat and out of shape
Looks like you have done this before.
Where are you located?
Was my first time. Indianapolis
@@BudgetPowerGarageI need some advice on the cambering I did a 2 inch life and it's not lining up
I want to make one like it
Do it
I've never seen a break line be pulled so hard you could of removed the calliper would of made it alot easier as your break line was holding everything up
Then you have to bleed the system. This is the fast way. Lol
@@BudgetPowerGarage removing the Caliper from its mount and setting asidewould have been the correct move and doesn’t require you to re bleed “Lol”
Very talented guy. But with respect needs a tuneup on himself. Breathing too heavy. Needs a self carburetor deep clean on those jets.
Down 50 pounds and go to the gym on a regular. Check out my progress on my RUclips shorts.
Dude slow down your going to give your self a heart attack
I was definitely getting there
If you didn’t put spacer on the knee on top the coil spring you did not do anything to lift the vehicle
You need to organized your garage...it's a accident waiting to happen...
Lol
super job. but you should do some sports and loss some weight for your health :)
Working in the garage isn't a sport?
Down 50 pounds and ho to the gym regularly. Check out my ytshorts