Bad TXV & Refrigerant Leak What Else Could You Want?
HTML-код
- Опубликовано: 9 дек 2023
- It's almost never the TXV but it was at this service and no call would be complete without a refrigerant leak! Let's get started.
- Purchase your tools at www.trutechtools.com?aff=13 and use the offer code SURVIVAL to save 8% on your total purchase (exclusions may apply) -
D-TEK Stratus Detector trutechtools.com/Inficon-D-TE... 13 nt-Leak-Detector-and-Portable-Monitor?aff=
D-Tek 3 Leak Detector trutechtools.com/inficon-d-te...
Gas Mate Leak Detector trutechtools.com/Inficon-GAS-...
Inficon Recovery Machine trutechtools.com/Inficon-Vort...
Inficon Comb Analyzer trutechtools.com/inficon-502-...
Testo Comb Analyzer trutechtools.com/Testo-300-Re...
Testo 557 Manifold trutechtools.com/testo-557s-s...
Testo 550 Manifold trutechtools.com/testo-550s-s...
Navac Corless Vac Pump trutechtools.com/NAVAC-NP4DLM...
Navac Cordless Flar trutechtools.com/navac-nef6lm...
- TOOLS I USE -
FULL TOOL LIST ON THIS PAGE - kit.co/hvacrsurvival
💥 Amazon Store: www.amazon.com/ref=as_li_ss_t...
SHORT TOOL LIST BELOW
MTR Micro 6000 Rosebud Heating Tip - amzn.to/3Qpmk5s
MTT Micro 6000 Flexible Twin Tip - amzn.to/40sTu92
MTF-5 Cap'n Hook Tip - amzn.to/3SnGr6E
Uniweld 71 Welding Handle Needed For Above Tips - amzn.to/3QiNJpC
TOPDON TC003 Thermal Imaging Camera, 256x192 IR High Res amzn.to/3sWLTTn
RIDGID 31305 Model E-110 9.5" Offset Hex Jaw Pipe Wrench - amzn.to/3Bar08y
Klein Tools Ratcheting Box Wrench 1/4 x 5/16 amzn.to/3GOpBrG
KNIPEX Tools - 10" Pliers Wrench amzn.to/3U7RRJf
KNIPEX Tools - 10" Cobra Water Pump Pliers amzn.to/3Wje8Wn
Knipex Tools - Mini Pliers in Belt Pouch amzn.to/3WguyyH
KNIPEX Tools - 4" Cobra XS Water Pump Pliers amzn.to/3UaQiKA
Bahco -6" Wide Mouth Adjustable Wrench amzn.to/3sHIsMV
Bahco - 8" Big-Mouth Adjustable Wrench with Rubber Handle - amzn.to/3SPhDB7
Knipex - 9.5-Inch Ultra-High Leverage Lineman's Pliers amzn.to/3DTLJ2h
Klein Tools Diagonal Cutting Pliers with Angled Head - amzn.to/3zuBVJb
Klein Tools Stripper, Crimper Tool - amzn.to/3gQQ6Su
Klein Tools Wire Cutter and Wire Stripper - amzn.to/3Fs627W
Klein Tools Kurve Wire Cutters, Heavy Duty Wire Stripping Tool - amzn.to/3FseIuW
Klein Tools Heavy Duty Automatic Wire Stripper - amzn.to/3SQdZab
Klein Tools Crimping and Cutting Tool - amzn.to/3TPIgXU
Klein Tools Screwdriver Adjustable 4 to 8-Inch amzn.to/3Nl6KWz
IDEAL INDUSTRIES Digital Circuit Breaker Finder - amzn.to/3DoBFwm
Fluke 376FC AC/DC Clamp Meter with iFlex - amzn.to/3UaNyx2
Fluke 62 Max Industrial Infrared Thermometer - amzn.to/3SNdwWg
Fluke 902 FC HVAC True-RMS Clamp Meter - amzn.to/3Ws7OfB
Fluke 87V MAX - amzn.to/3U6Rlv9
Fluke Networks Pro3000 Tone Generator - amzn.to/3WedklG
Fluke - FLUKE-52 Dual Input Digital Thermometer amzn.to/3zwFdf1
Ideal Safe-T-Grip Fuse Puller - amzn.to/3zsw2w4
Klein Tools Canvas Zipper Bag - amzn.to/3WgnJxq
Uni-Paint PX-20 Oil-Based Paint Marker - amzn.to/3sE3R9T
5 Gallon Bucket Topper and Organizer - amzn.to/3sGi2Ll
Stabila Magnetic Pocket Level PRO with Holster - amzn.to/3FtYLo0
Clip & Carry Kydex Multitool Sheath for LEATHERMAN SURGE - amzn.to/3TPJfHA
Kydex Multitool Sheath for LEATHERMAN WAVE & WAVE + PLUS - amzn.to/3sJlhlg
Cooper Atkins Thermistor Thermometer - amzn.to/3DLeHkC
GEARWRENCH Internal/External Ratcheting Puller 7 Ton 2 or 3 Jaw - amzn.to/3FxTU5l
- CONTACT INFO -
hvacrsurvival@gmail.com
- FOLLOW ME -
Instagram - / hvacrsurvival
Facebook - / hvacrsurvival
Warning Notice Disclaimer - Video content listed on the channel HVAC*R Survival is for entertainment purposes only! **Do not attempt anything said or seen on my videos, The tasks that are shown are dangerous and deadly without proper training.
**This page contains affiliate links, which means that if you click on the link and make a purchase, I’ll receive a small commission. HVAC/R Survival is a participant in the Trutechtools, Amazon Services Associates Program.
#hvacrsurvival #hvaclife #hvacservice #hvacr #refrigeration #troubleshooting - Развлечения
those cases are clapped!
There should be a ball in the sight glass that float when there is some liquid. Or a color changing material, or something...
On the liebert PFH condensers i work on, the recievers have a sight glass with a ball in it. Liebert call for the ball to float to the middle or the top for a proper full charge. Im suprised other manufacturers dont do the same.
You obviously dont work on this bur, watch a different channel
@@josemartinez-jt6twwhy does someone need to watch another channel if they don't work on this stuff? That just hurts HVAC Survival lol
You got to love the bricks holding the condenser.
Thanks Rick for sharing your work experiences with us !
Great job Rick
Nice work Rick.
Cant really say anymore that i am amazed by your level of professionalism.
Heck ill say it anyway.😂
Can't wait for the next video.
Your to kind! Thanks for watching them!
Great video Rick! Thank you for sharing your knowledge and experiences.
Glad it was helpful!
I do the same thing when I condemn and replace a valve with the thought the power head lost the charge. It’s so satisfying when you cut it and nothing comes out! lol. Great video and great diagnosis!
It's a great thing to not hear indeed
Great video. I like to see what can be done with the old cranky stuff.
Man these videos are so helpful. Thanks for filming i know the job is hard work even without making and editing
I appreciate your appreciation!
Some good lookin equipment there 😅. Nice job Rick!
Nothing but the best for me 🤣 NOT!
thank you for sheering. great video.
I’m glad you like it! Thanks 🙏
Nicely done as always Mr Rick.....a man of many talents....and a get er done spirit.
Thanks Jason!
Great job Rick.
Thanks John.
Feliz Navidad y Ano Nuevo HERMANO!!!! Hope this year gets better for us all………
Gracias 🙏
A small leak started last April. It shows up now because colder outside temps require more refrigerant to be backed up in the condenser. Good luck.
Call the health dept. on that crappy place lol
Lot of generations of guys working on that stuff over the years. I would love to have seen it in person
Anytime you wan't to come to Ohio I'll hook you up Joey!
Love the videos! Been watching for a long time now and I find myself having to go watch old live videos cause I’m waiting for your new videos to come out!
I did two this week, It's hard to do that many but I'm trying to get them done quicker
@@HVACRSurvival they are awesome! We appreciate the videos a ton
You do awesome work enjoy your videos learn something new on each video thanks
Awesome, thank you!
Great work as always ... Thx
See if your company will get you the sporlan BQ kit. You can pretty much build almost any valve you need with it. Saves you time and gets the case back up and running a lot faster... Good luck leak checking tomorrow.
Thanks! I should ask about it, they are picky about what they stock on the truck.
Great Video. Thank you for sharing. Have a nice weekend
Thanks brother!
Love to watch all the oil come back after Txv clog.
Love your videos...thanks for bringing us along.
Spell across :)
You are so welcome! Thanks for watching!
Great video Rick. The Hussmans I work on you can take the TXVs apart to clean them which I have done a few times but the ZeroZones use Danfoss TXVs and you can’t take those apart which sucks because you just have to replace it. Good stuff as always!
Thanks man!
I think you forget to pull vacuum.
Nice 👍 job
Great video check the TXV what l did first thing is pour hot water to see if it has moisture it will start feeding if not pull off TXV bulb to see if your pressure are changing if not change bulb .
Awesome video Rick! Lucky the line set is exposed most I’ve worked on is in the slab. Those old Hussman condensers that have the receiver on the bottom will have have a pressure relief on the back side of the receiver and will leak a lot being on high side. Keep up the good work brother!
That might be where it went then. I was told the condenser fans failed twice. I will be checking for oil at the pop off, I didn't see them.
@@HVACRSurvival I believe it is a 1/2 or 5/8 flare hard to see sometimes. I have found 2 or 3 when leak detection of cases turn up nothing. Once they start leaking they won’t stop. I’ve capped all mine with a flare cap. Good luck maybe another video.
You are right ,i had that before,what do you think about going from low to hbp on the txv.@@FPHA697
Great video Rick
You might want to check the compressor,if it is low pressure,because you put a HBP txv,and you might be over feeding the compressor,the extra refrigerant.meat display run at 28 deg.hope that helps.
I'm not good at matching the txvs, thats why I had our top guy do it. If it's wrong then I would hope he would of caught it.
It is hard to charge a unit with r134 to clear glass,when it is cold and the fans do not cycle,sometimes they will not clear,the frost pattern on evap and s/h should be good enough
I was concerned how much I had to add and the flow of the refrigerant looked slow. I will feel better once I remove it and weigh in, then I'll know what the total charge is.
charge it with the head pressure connected,if it is cold you might have to block condenser to bring head pressure up to clear sight glass.@@HVACRSurvival
How do you charge on a job like that? Is it a call out then hourly rate + parts etc,, or do you quote the job up front... i have stopped doing refrigeration due to the high cost of parts and gas and the constant arguments over price, i cant get it through to customers that they may have more than one problem and the price will change.. my favourite one is 'it just needs topping up' or the old ' it needs new gas' ??? Its a difficult field for small or one man companys, especially when the customer wont pay a call out and wants a cast in stone quote over the phone 😂 I think im better sticking to the other catering equipment like ovens and dishwashers, etc...😅
Hourly plus parts unless they want it quoted. Then it’s wherever time I think it will take and the office calculates it out.
The compressor is design for 0 to 20 deg,i would not modify ref.thanks for sharing.
I don't understand what modification your talking about.?
you replaced txv from low to a +50 to -10 txv.@@HVACRSurvival
You had Chris's hat on that shelf, or i saw something similar? 😂
I sure did! He gave me another when I seen him in California for the NASA transport.
here a leak, there a leak, everywhere a leak leak.(probably). maybe the failed powerhead was leaking refrigerant out somehow or you fixed a leak playing with the txv initially?
I think when the condenser fans went out that it may have blown its load through the relief valve.
Fantastic video thanks has tooth pick bob been commenting
I haven't heard of him. lol
What brand is that blue marker you always use?
Uni-paint
I've seen worse, but that store is nasty!
What are those holes on the flare nut on the txv? Black dots ?
Helps keep the moister out of the nut so it doesn't crack I believe.
@@HVACRSurvival did not know that. Thanks Rick !
you could be able to change powerhead easy.
OK, Explain how you would do it and why you would want to warranty it for free if it failed in a year after the repair?
If you already clean filter and pin it would work Great. Powerhead most of time is issue when it lose charge and slammed closed. You did good
@@HVACRSurvival I work for supermarket refrigeration with racks
check that all txv's are the same.
Similar build but they work the same
that they are 43 fzp power heads,low temp.@@HVACRSurvival
I believe I mentioned that the original head was low temp in the video.
🇺🇸💪👍❄️
they left you some bologna, i see
That’s fresh I’m sure 🤣
First!