My brother said he loves that you have it when it's a dg2 it shoots 3 ans the dg3 shoots 6. It's cool that one lever makes the lights stay on for the shot and turns off for the intervals
Infinite Percent Super SSS+++ Work, W. DG2!! It looks Wunderful!! I've still been supporting u, so don't worry! Amazing work, W. DG2!! You're the best DIY person around! :D
would you consider doing a tutorial on how you made it, how it was printed etc. I know the original designer is TheRayGunProject but it seems so daunting to even try to replicate
You should've added a spring and a catch for the bolt handle. Pulling it back initially locks it during reload, and pulling it back again disengages the lock more similarly to the games. it would also be cool to have a clip that slides on and off the bulbs for easy loading.
Imagine you get drafted for a war and get sent to the front lines. They start handing out weapons to the soldiers and you notice that everyone is getting different guns. Finally, they get to you and they hand you the FRICKING WUNDEWAFFE DG-2!
Glad to see someone else recently completed this! Great work! I am currently in the process of printing the parts... the next hurdle is to get all the electrical components squared away! Do you happen to have any tips for assembly and such?
Thanks! As for tips, I'd recommend testing the ejectors and trimming parts if necessary until they work without issue before gluing/installing them to the panels, most of the electronics shouldn't have issues if everything is wired correctly, however be sure the prongs on the light bulbs are long enough to complete their circuit when put into the ejector so that they do get a good connection
@@W.DG2 nuts. I tried messaging ray gun project about it but he never replied, he provides the code fro them.”, but not much else, not even a BOM list sadly.
Hard to say since I had some stuff on hand already but some things I had to buy that i did not have totaled around $220. (This doesn't count electricity cost for the printer running days)
Thanks I aplerciate that! Also yes, a majority of it are 3d printed parts except for certain things like the hose, some of the rods are wood and metal, and a wooden dowel as barrel support
Honestly it was a bit a challenge, the main part that's hard is getting the ejection to work. I'd recommend sanding or carefully trimming some parts of the ejection with a small razor so that they run smoothly, otherwise there is too much friction and the bulbs will fail to eject
Bro you are an absolute legend! I've been looking for something better than that garbage activision put on their website. True attention to detail and the DG-3 mode made me absolutely lose it. Where can I buy one?!
It seems like you printed the mounting panels instead of laser cutting them from 1/4" wood, any way you can share those stl's? I've tried converting the svg but with no luck
Timestamps
0:01 intro
1:40 modes showcase
3:07 fire/ejection/reload
3:46 DG3 fire/eject
4:15 credits
That intro was something else🔥
Fr
the ops aint gon know what hit em 😭😭😭😭😭
😂
This is pretty sick. Definitely quite the sight to see. Nice job
Thanks!
My brother said he loves that you have it when it's a dg2 it shoots 3 ans the dg3 shoots 6. It's cool that one lever makes the lights stay on for the shot and turns off for the intervals
I really like that you went for a more bo1 theme skin compared to the ray gun project version, absolutly stunning work!
Thanks! And yeah I prefer the look of that version of the DG2
The intro was just perfect, and so is the Wunderwaffe.
Infinite Percent Super SSS+++ Work, W. DG2!! It looks Wunderful!! I've still been supporting u, so don't worry! Amazing work, W. DG2!! You're the best DIY person around! :D
Thanks so much, really appreciated!
Awesome job dude, looks great!
Thank you!
What a masterpiece 😲
Amazing work, my friend!!! I like how you made it look more like the WaW version woth the gold trim pieces. Well done!
Thanks so much!!
And yes, I went with the look of the older dg2 since it's my personal favorite!
Ooooow the wunderwaffe DG 2 my favorite zombie killing machine. Electrify 🧟♂️🧟♀️🧟
Meh i love the blundergat
blundergat is cool tho but it's better when it's pack a punched
@@DarrenDepentieiros what do you mean pack a punched you mean the sweepr or the vitrolic weathering
The og zombies was some of the best
This is the quality of replication cod needs to follow if they're gonna sell replicas.
"Sir, you're 2 months back with the taxe..."
My honest reaction:
would you consider doing a tutorial on how you made it, how it was printed etc. I know the original designer is TheRayGunProject but it seems so daunting to even try to replicate
PLEASE MAKE SOME FOR SALE😫 It looks amazing!!!🔥
If I say the same XD
This is how I remembered the fun days of cod when corporations weren’t in control of everything
Nice stand bro
You should've added a spring and a catch for the bolt handle. Pulling it back initially locks it during reload, and pulling it back again disengages the lock more similarly to the games. it would also be cool to have a clip that slides on and off the bulbs for easy loading.
Imagine you get drafted for a war and get sent to the front lines. They start handing out weapons to the soldiers and you notice that everyone is getting different guns. Finally, they get to you and they hand you the FRICKING WUNDEWAFFE DG-2!
*breathes
*VUNDEVAFFE DEE GEE TWOOOOOO*
Glad to see someone else recently completed this! Great work! I am currently in the process of printing the parts... the next hurdle is to get all the electrical components squared away! Do you happen to have any tips for assembly and such?
Thanks! As for tips, I'd recommend testing the ejectors and trimming parts if necessary until they work without issue before gluing/installing them to the panels, most of the electronics shouldn't have issues if everything is wired correctly, however be sure the prongs on the light bulbs are long enough to complete their circuit when put into the ejector so that they do get a good connection
Holy shit that it badass
Thanks 🙏
Would you consider making a tutorial for the electronics? Or sell kits of them? xD
Maaan, idk if I'd do another cause wiring this thing was a pain 😭
I learned alot from it with help, but idk about wiring another
@@W.DG2 nuts. I tried messaging ray gun project about it but he never replied, he provides the code fro them.”, but not much else, not even a BOM list sadly.
@@Enojadoland really? I got the list from website, he also sells the blueprints, they are $5 iirc
@@W.DG2 Oh? The blueprints he sells include the BOM for the electronics? :O
Badass
If you don’t mind me asking about how much did this come out to be? Just asking cause I saw this the other day and am thinking about doing it.
Hard to say since I had some stuff on hand already but some things I had to buy that i did not have totaled around $220.
(This doesn't count electricity cost for the printer running days)
Dont suppose your selling that beauty 👀👀👀
Unfortunately not, this was one of the hardest projects I worked on :(
Unfortunately not, this was one of the hardest projects I worked on :(
What did you use for the sound effects? Arduino? Adafruit?
Adafruit M0
Your work is incredible, I was drooling.
Tell me something, did you make all the parts on the 3D printer? Or did you use other materials too?
Thanks I aplerciate that!
Also yes, a majority of it are 3d printed parts except for certain things like the hose, some of the rods are wood and metal, and a wooden dowel as barrel support
I really want to re create this !! How difficult was it to do? Any tips ?
Honestly it was a bit a challenge, the main part that's hard is getting the ejection to work. I'd recommend sanding or carefully trimming some parts of the ejection with a small razor so that they run smoothly, otherwise there is too much friction and the bulbs will fail to eject
For Sale? And at what price?
Bro you are an absolute legend!
I've been looking for something better than that garbage activision put on their website.
True attention to detail and the DG-3 mode made me absolutely lose it.
Where can I buy one?!
oh man I wanted that gun so bad I ordered it when it was on sale but I was trying to communicate with the seller but he wasn’t responding back to me
Is it possible to buy one ?
Currently I don't sell the DG-2s cause shipping would be difficult and expensive
@@W.DG2 like maxis XD but for real I understand. Didn't think people would answer after that many time. Glad I was wrong.
What are those led lamps called?
The 3 bulbs? Those are the vacuum tubes but they just have a led inside
how did you make the gersh device?
@@NeNukee 3d printed
You must’ve gotten this from the Ray gun project RUclipsr
@redstonecommander5190 indeed
Did you use the ray gun projects files?
Yes, I used his for this one
That's cool, but does it play any other music?
dude it would be sick if it played "the one" like in the video if you did/pressed a certain combination of buttons
I'll sell you my soul for that, 11/10
how much I’ll buy rn
It seems like you printed the mounting panels instead of laser cutting them from 1/4" wood, any way you can share those stl's? I've tried converting the svg but with no luck
you can find the STL files on the original creator's website, which is linked on his channel
what do you sell
How much u want 4 it
350$ on cod shop
@@zlatthayce4903not the same one, this is a custom
Did u make that??? How do I get one?
Cod shop
@@zlatthayce4903 cod shop where
@WOPONTOP this was a custom creation at the end it says who designed it. The one in the shop is ½ scale and $350