Love that everyone here has work related comments and questions and I'm just here trying to figure out what to use for my Detroit Become Human cosplay lmao
Oh, man. This would be awesome to integrate with car interiors, seats specifically. If there's an application that can invert the power from the car, I'm all over this! Ahhh!!!!! Jackpot!
Joely, you are in luck! We make 12V inverters that can either directly connect to the car's battery, or even a switch (sold by 3rd parties) so you can turn them on from the dash. Our inverters can power up to 700sqin, so prepare to go crazy!
Not really. Just pass the cost onto the end user. For a personal project, its still worth it to make a one of a kind thing. Just save your pocket change.
I remember seeing this product back in about 2006 2007 couple years before the tram movie came out I remember seeing it sold in kind of a tape like that on the Internet and then all the sudden sort of just disappear if you can find it I wondered if the company had sold and then started marking it more towards safety equipment and stuff like that but I didn’t see become available again to the public until about 23 years after the Tron movie came out
kani_mar please send us an email with your design requirements. It is likely possible. Feel free to include any attachments or artwork that we can reference to info@Ellumiglow.com
Thanks for your question! Yes, due to our proprietary materials and technique, the entire panel can be heat bonded with an iron or heat press without damaging the light panel.
Thank you! We do, please send an email to info@ellumiglow.com and we will have you fill out a dealer application form. Thanks for your interest and support in our products!
While it can be cut or trimmed, we don't recommend it for permanent applications like this. Also, because it's not meant to throw a lot of light like an LED is, we probably wouldn't recommend in place of a headlight. What this would be better suited for is on a helmet or jacket, backpack or on the bike frame itself for other riders or drivers to see you.
@@EllumiglowPage I think what he meant was he wants to use it inside the headlight as accent lighting around the edge of the headlight and not as the main headlight it self :)
@@dcf476 While it can be used for this, I think you would find that the light output would be lackluster when comparing to bright headlights shining on it. If it's used for a car show or for novelty purposes, then it would be fine to have this light as an accent around the headlight. Just know that it will be washed out with other lights.
It can definitely be used in furniture. We use this same product in custom cars, boats, etc. to add emblems and other elements in seats, visors and headrests. This video was more to share what kind of ideas are possible, but certainly not an exhaustive list.
raid bendris yes. Please visit Ellumiglow.com for some off the shelf products. For custom applications and to get a shipping quote on international shipping, please email info@Ellumiglow.com
Great! Please send an email to info@ellumiglow.com with your contact information and we will get back to you with additional details on setting up a wholesale account.
You can purchase this directly at our website, the link is in the video description. For custom inquiries, please contact us via email at info@ellumiglow.com
While it is cuttable for prototyping purposes, if you were to make a production run of a particular clothing line, we would highly recommend having it factory cut. In doing so, we can customize to nearly any shape, size or color.
@@aesopwolf3126 Please send us an email to info@ellumiglow.com and include any measurements, color, and shape you desire. We will get back to you with a full quote for prototyping and any volumes you may need.
Please check the link in the description. We have a number of off-the-shelf shapes to choose from, and can also custom make to nearly any shape, size or color.
cosmic coolie , can you send an email to info@ellumiglow.com with your contact info? We will be happy to send you a quote. VynEL can be customized to virtually any shape, size or color.
T Smith this is a little bit of a variable answer because there are a handful of factors that determine the power requirement, but on average VynEL consumes around 2-5mA per square inch. In larger applications this number is a little lower. The color is fixed, but we can make the panels in virtually any shape, size or color.
There's many different battery packs that range in size and longevity. Some will take disposable batteries while others will use rechargeable batteries. Some inverters simply have a USB-C type input so you can scale your battery to fit your needs.
@@EllumiglowPage Can you give me a rough idea of how long it would last with some rechargeable batteries, 4 hours, 10 hours etc, just a ball park idea is all im after, thanks
Yes, we can make it in a cool white. We actually have some new White ON and OFF shapes which can be purchased from our website. They have a heat bonding adhesive which can be instantly applied to nearly any garment.
Love that everyone here has work related comments and questions and I'm just here trying to figure out what to use for my Detroit Become Human cosplay lmao
I wanna use this for my hair clips on my Hatsune Miku cosplay 😂😂
I know it is kinda off topic but do anyone know of a good place to stream new tv shows online ?
Dude same, figuring out a cosplay for Sky: children of the light
That's because normal adults have jobs.
@@CORZER0 we do too we are just more creative than guys like you that work at a factory and go home to the sportsball game and cheap beer .
Oh, man. This would be awesome to integrate with car interiors, seats specifically. If there's an application that can invert the power from the car, I'm all over this! Ahhh!!!!! Jackpot!
Joely, you are in luck! We make 12V inverters that can either directly connect to the car's battery, or even a switch (sold by 3rd parties) so you can turn them on from the dash. Our inverters can power up to 700sqin, so prepare to go crazy!
a great innovation, However, could it be possible to create something that was like this, but multicolor? like typical led strips?
Really cool product but the $30/m price point is kinda prohibitive
Not really. Just pass the cost onto the end user. For a personal project, its still worth it to make a one of a kind thing. Just save your pocket change.
I remember seeing this product back in about 2006 2007 couple years before the tram movie came out I remember seeing it sold in kind of a tape like that on the Internet and then all the sudden sort of just disappear if you can find it I wondered if the company had sold and then started marking it more towards safety equipment and stuff like that but I didn’t see become available again to the public until about 23 years after the Tron movie came out
Think you could use this for or on a POI staff?
I would be interested if there was a way a specific shape/ quite complex design - could be cut out.
kani_mar please send us an email with your design requirements. It is likely possible. Feel free to include any attachments or artwork that we can reference to info@Ellumiglow.com
Hi! I was looking for something like this! I want to integrate it in my collections. Where could I buy it/learn more about it?
You can visit Ellumiglow.com, or VynEL.tech to learn more. To have us make custom VynEL™ panels, please email us at info@ellumiglow.com.
The stuff is so amazing! I bought a bunch of this stuff and don’t know what to do with it. I just like to look at it. 😂🤣
A solar charging option would be nice.
Can you cut it and have it work??
Can only the leading edges handle the temps required for heat-bonding, or can the entire piece handle (350F) without compromise? Thanks.
Thanks for your question! Yes, due to our proprietary materials and technique, the entire panel can be heat bonded with an iron or heat press without damaging the light panel.
Great Product.Do you sell it in wholesale ?
Thank you! We do, please send an email to info@ellumiglow.com and we will have you fill out a dealer application form. Thanks for your interest and support in our products!
Amazing 👍👍👍👏👏👏
Does the 1M Strip Light come with a power inverter on your website?
can’t wait to see this plastered onto every pc on r/pcmasterrace
I want to pt this in my headlight. Can it be cut and/or trimmed?
While it can be cut or trimmed, we don't recommend it for permanent applications like this. Also, because it's not meant to throw a lot of light like an LED is, we probably wouldn't recommend in place of a headlight. What this would be better suited for is on a helmet or jacket, backpack or on the bike frame itself for other riders or drivers to see you.
@@EllumiglowPage I think what he meant was he wants to use it inside the headlight as accent lighting around the edge of the headlight and not as the main headlight it self :)
@@dcf476 While it can be used for this, I think you would find that the light output would be lackluster when comparing to bright headlights shining on it. If it's used for a car show or for novelty purposes, then it would be fine to have this light as an accent around the headlight. Just know that it will be washed out with other lights.
Did your company go out of business? I don't see any products on your website.
I think our site was upgrading when you saw it. All of the products are currently viewable. Thanks for your inquiry!
Perfect for my application. Is there a way to ship to Italy?
apparently elluminglow only ships to US,Canada and UK
I have a 125 cc coolster dirt bike I'm going for the Tron look
I would recommend the VynEL Cling. It’s made similar to how car wraps are made, so it’s easy to apply any types of graphics or accents.
So is there a reason it's not brought up when looking for furniture lighting?
It can definitely be used in furniture. We use this same product in custom cars, boats, etc. to add emblems and other elements in seats, visors and headrests. This video was more to share what kind of ideas are possible, but certainly not an exhaustive list.
@@EllumiglowPage thanks. I think I'll keep these in mind for my next project
I'm almost done in welding school. I have thought about making welded LED furniture too!!!
Any thoughts on using it to decorate my Rav?
Sure! You could use it for headliners, arm rests, seat backs and more.
Is it possible this will be available in one setting multicolor?
This is only available in a single color, but we can match pretty closely to any pantone in either on or off.
Yeah…..I got IN
you should take this to shark tank
Can this be combined with sensors, i.e., motion or light sensors to activate lights, when putting in an order? Or getting a prototype?
We can add any number of sensors to the product. Feel free to email us at info@Ellumiglow.com so we can help with your project.
Thank you, sounds good! 😁👍
love it
how much ?
and can you send it to Algeria ?!
raid bendris yes. Please visit Ellumiglow.com for some off the shelf products. For custom applications and to get a shipping quote on international shipping, please email info@Ellumiglow.com
Where to order
Please check the link in the description to order. Thanks!
Hola, hacen envíos a Colombia?
Sí, enviamos a Colombia!
I am interested to buy in whole sale. Plz can u share details?
Great! Please send an email to info@ellumiglow.com with your contact information and we will get back to you with additional details on setting up a wholesale account.
is anyone working with this product on traffic vests?
It's definitely a great idea. If you would like to speak to us directly about this, please email info@ellumiglow.com
Can you ship it to india ??
Yes, we do ship globally. Feel free to contact us at info@ellumiglow.com
I want to buy this tell me how
You can purchase this directly at our website, the link is in the video description. For custom inquiries, please contact us via email at info@ellumiglow.com
if i use it for my clothes ...
can i cut it?
While it is cuttable for prototyping purposes, if you were to make a production run of a particular clothing line, we would highly recommend having it factory cut. In doing so, we can customize to nearly any shape, size or color.
@@EllumiglowPage where can i place an order for a custom length? it would be rly cool on my leather jacket but 1m is too long
@@aesopwolf3126 Please send us an email to info@ellumiglow.com and include any measurements, color, and shape you desire. We will get back to you with a full quote for prototyping and any volumes you may need.
I thank you so much 4 this amazing product (hope it's real and I'm not getting 🤡)
Where can I buy?
Please check the link in the description. We have a number of off-the-shelf shapes to choose from, and can also custom make to nearly any shape, size or color.
How can I communicate with the administrator
Please send an email to: info@ellumiglow.com and we will be happy to direct you to the proper person. Thanks for your inquiry! محمد انور
Lights kinda looks dim....
almost no consumer will use this at the price point of >$25 per 1meter lol
how much is it?
Please visit the link in the video description for further information and pricing.
👍🏻
i need order three feet long and 1 inch width/wide
cosmic coolie , can you send an email to info@ellumiglow.com with your contact info? We will be happy to send you a quote. VynEL can be customized to virtually any shape, size or color.
Jesus. What a singular mono tone, nice reading robot
I am trying to reach you. Your mail is bouncing back
please email info@ellumiglow.com - I just checked and our email server is working properly. Please check the email address and try again. Thanks!
Thanks for being enovative
What I'd the power requirements per square inch? And do you have a color variable type?
T Smith this is a little bit of a variable answer because there are a handful of factors that determine the power requirement, but on average VynEL consumes around 2-5mA per square inch. In larger applications this number is a little lower. The color is fixed, but we can make the panels in virtually any shape, size or color.
How long does the battery pac last for?
There's many different battery packs that range in size and longevity. Some will take disposable batteries while others will use rechargeable batteries. Some inverters simply have a USB-C type input so you can scale your battery to fit your needs.
@@EllumiglowPage Can you give me a rough idea of how long it would last with some rechargeable batteries, 4 hours, 10 hours etc, just a ball park idea is all im after, thanks
@@chaostrooper9588 For instance, a 1000mah lipo battery could power a 1m long strip for about 8-10 hours on a charge.
Does is cool in a cool white?
Yes, we can make it in a cool white. We actually have some new White ON and OFF shapes which can be purchased from our website. They have a heat bonding adhesive which can be instantly applied to nearly any garment.
@@EllumiglowPage Great can you send direct link of the cool white? i couldnt find
micmiller2015@ gmail.com
@@wavesofkatrina We have added the link to the video description. Check out the VynEL HD Sphere, or Badge.
@@EllumiglowPage I dont see white in waterproof 12votes www.ellumiglow.com/electroluminescence/vynel/vyneltm-1m-waterproof-strip-light
How to buy in india and how
Please email us at info@ellumiglow.com