We do indeed, although sold separately. The reflectors are designed to bolt on to the bottom of the plate (SA, NT and WA may need additional holes made for this purpose in some cases).
@@MustardBikesI am thinking about getting custom plates (my plates) [NSW] it would be compatible with it right? could you send a link to the reflector is possible, thanks.
Hi. Did you cut off a red connector from OEM plate light and reused it on this tail tidy? From what I understand, it doesn't come with a connector pre-installed
Hi Yura, that is correct. Thus far we have been unable to source the matching connector. As such the only solution is to cut and fit the OEM connector from the OEM rear fender.
How do you attach the red connector to the wires from the new unit? It would be nice if you showed that step or could at least explain it. The same issue will presumably come up if replacing the large, ugly OEM turn signals with aftermarket ones so it seems important to explain. Thanks
@@MustardBikes It' the 3 pieces that make up the tail. I only see 1 screws left on each of the lower piece holding it to the top one. But after risking breaking the top piece to remove one of the screws, the lower piece still would not come off. I guess it's the way it is snapped to the top piece. Not knowing which way I'm afraid to apply force. Will ask my dealer in the coming wknd. Thanks.
I’d suggest checking out the prices of some of our other brand name competitors, I think you’ll be surprised at how competitive our pricing is. These are designed and hand made by us right here in Australia.
I like a bit of blue lock tight threadlocker on anything subject to vibration. Video well done, thanks
Awesome to make a video guide, makes it super easy
Thanks for the feedback Don!
Excellent presentation.
Thank you!
Prepping my RC390 for track only, this was extremely helpful!
Glad it helped Nick! We have an earlier model as a track bike and they are a great machine to build corner speed skills with.
Why tf do you need a license plate at all if you’re prepping for track 😂
exactly what i was looking for. Thank you
Saying as I would put this tail tidy on my 390, do you guys have reflectors that are compatible with the tailtidy?
We do indeed, although sold separately. The reflectors are designed to bolt on to the bottom of the plate (SA, NT and WA may need additional holes made for this purpose in some cases).
@@MustardBikesI am thinking about getting custom plates (my plates) [NSW] it would be compatible with it right? could you send a link to the reflector is possible, thanks.
@@TheAustralianGarbologist Yep, should still be compatible. AR reflector: www.mustardbikes.com.au/adr-approved-reflector-mounting-bracket
Hi sir, do you have an idea if rc200 and rc390 has the same rear seat?
Hi there, our understanding is they are the same seat unit.
Hi. Did you cut off a red connector from OEM plate light and reused it on this tail tidy? From what I understand, it doesn't come with a connector pre-installed
Hi Yura, that is correct. Thus far we have been unable to source the matching connector. As such the only solution is to cut and fit the OEM connector from the OEM rear fender.
@@MustardBikes thank you for your response. Good to know
How do you attach the red connector to the wires from the new unit? It would be nice if you showed that step or could at least explain it. The same issue will presumably come up if replacing the large, ugly OEM turn signals with aftermarket ones so it seems important to explain. Thanks
@@playboytwo the video should link directly to a separate video explaining the process of fitting an OEM plug. Hope that helps!
@@MustardBikes I found it minutes after posting this. Thanks so much!!
can you tell me how to remove the plastic? I've taken out all the screws I can see but the plastic is not coming off:(
@motojc which piece of plastic are you referring to? I would go back and check you have indeed removed all screws shown in the video.
@@MustardBikes It' the 3 pieces that make up the tail. I only see 1 screws left on each of the lower piece holding it to the top one. But after risking breaking the top piece to remove one of the screws, the lower piece still would not come off. I guess it's the way it is snapped to the top piece. Not knowing which way I'm afraid to apply force. Will ask my dealer in the coming wknd. Thanks.
Do you guys ship in the US?
We sure do. You can find this product here: www.mustardbikes.com.au/rc200-390-2022-current-tail-tidy
seems a lil pricey at that price u would think it would come with LED turn signals.. Just Saying ..
I’d suggest checking out the prices of some of our other brand name competitors, I think you’ll be surprised at how competitive our pricing is.
These are designed and hand made by us right here in Australia.
@@MustardBikes I have.. I picked mine up off Amazon for 28.$ And it’s orange it’s universal setup