Those look like a good solution and strong, too. My quick fix has been 5-10mm of fuel tubing at the bottom of shock shafts to act as a limiting bump stop. Haven't had any pop out since. I recommend flashpoint tubing as it is a bit thicker than others.
Broke down and ordered a set of these. It's going to be sooo nice to get rid of my bump stops and be able back the droop screws out. I've bought new drive cups and new stock axle shafts and still tend to loose a rear shaft.
Nice, I've asked and I've asked Arthur Tsang to make some splined axles for the fronts of the Udr so we don't break stub axles from those pins. I really like Vitavons products and staff, I think I might just go ahead and Frankenstein my own set, from what's available.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Dude you and Gary were straight killin' it, it looked so dialed watching both those trucks ripping the track together excellent skill/driving!
Thanks Joe. Ordered mine from Arthur today. Lets goooo Vitavon 👍🤠👍
Those look like a good solution and strong, too. My quick fix has been 5-10mm of fuel tubing at the bottom of shock shafts to act as a limiting bump stop. Haven't had any pop out since. I recommend flashpoint tubing as it is a bit thicker than others.
Broke down and ordered a set of these. It's going to be sooo nice to get rid of my bump stops and be able back the droop screws out. I've bought new drive cups and new stock axle shafts and still tend to loose a rear shaft.
If you remove the red end caps on the lower a arm it will stop it from popping out also that’s what I’ve done to all my arrma 6s rigs
Some really good drivers out there. Excellent racing at the end, one millimeter makes all the difference with those axles!
Nice, I've asked and I've asked Arthur Tsang to make some splined axles for the fronts of the Udr so we don't break stub axles from those pins. I really like Vitavons products and staff, I think I might just go ahead and Frankenstein my own set, from what's available.
i just took the pillow ball shims out of mine not lost one since
Nice one Mr. Vitavon 😂🤟
Did you also remove the shims from the pillow balls as many have done, or was the axle upgrade the only change?
A nice innovation for sure! Is vitavon going to be producing this for all Arrma 6s/8s ?
These videos are just vitavon commercials lol
Great content regardless just teasing 😅
Might as well change your channels name to Vitavon RC .
😆 🤣
Wouldn't you sell them if you were making $$ I know I would.
Cool durability test 😎
What software do you use to edit your videos? I have started my channel and want to have better production any tips?
Are those the same axels as the Fireteam? because I have that problem on my Fireteam!! It's pretty annoying!!
Will these work on fire team
Will they work on a Typhon?????????
Hey is he gonna make some arrma kraton 6s
Have you got a link to descent rc hex drives? Thanks.
MIP drivers pricey but worth every bit.
@@ctay1071 Thanks :)
😁👍
Is the traxxas UDR still worth it??
I'm planning on buyin one
한글 번역 안되나요?
Are you and Vitavon married?
Great vid! But just remove the pillowball spacers with the stock shafts and problem solved😍🤌🏽🤌🏽💯✅️