Hello, I checked my wires and they are good, the indoor unit runs for 2 minutes, I have good voltage and then goes back to CH 05!! I went to the outdoor unit and replace the open board and I make sure that all the wires were connected the right way. I turned off the unit nearby and still same problem, what am I doing wrong ???
Hi, unfortunately you have this error, the “Units” digit of the fault code is shown by the power led, this is usually Red, but on a few models it is Green. The “Tens” digit will be displayed by one other led, usually the “Sleep” or “Filter” lamp. In any case it is the only error code with 5 flashes, it cannot be confused with a code with the number of tens 5, because the codes with the number of tens 5 start from CH51, which will be 5 flashes and one on the other led.
Hi, CH60 refers to EEPROM Check sum error. If removable EEPROM, check communication with the circuit board, check PCB for poor soldering. If not, the EEPROM is defective. Replace with the circuit board.
Thank you
Watching and learning👍❤
from the Philippines 🇵🇭
My ODU red and green LEDs remain on, while the IDU shows a CH 05 error. Please describe what may be wrong.
Same problem with Lg thinQ. Ch 05 always popping out. Fan motor is dead too.. how to resolve this?
I have an LG LMU366HV split system. Can the system function with only one IDU connected??
Hello sir I have a problem with my hi sense inverter mini split unit 1.5 HP.
The compressor runs for 5 second and turn of.
Please what is the problem?
Hello i have the artcool unit and now apppear the error C6 ??
Do you know what is this error and its easy to solve?
Thanks.
جزاكم الله خيرا
Hello, I checked my wires and they are good, the indoor unit runs for 2 minutes, I have good voltage and then goes back to CH 05!!
I went to the outdoor unit and replace the open board and I make sure that all the wires were connected the right way.
I turned off the unit nearby and still same problem, what am I doing wrong ???
Thanks 4 correction
Hello sir LG inverter cassette AC red light 5 time blinking
Hi, unfortunately you have this error, the “Units” digit of the fault code is shown by the power led, this is usually Red, but on a few models it is Green. The “Tens” digit will be displayed by one other led, usually the “Sleep” or “Filter” lamp.
In any case it is the only error code with 5 flashes, it cannot be confused with a code with the number of tens 5, because the codes with the number of tens 5 start from CH51, which will be 5 flashes and one on the other led.
Thank you
Lg vrf 5 time blue and 3 time red blinking problem solution
I have error ch82 lg package
CH12 error fault sollunga Brorher
Sir Ch 60 Error Also explain please
Hi, CH60 refers to EEPROM Check sum error. If removable EEPROM, check
communication with the circuit board, check PCB for poor soldering. If not, the EEPROM is defective. Replace with the circuit board.
Thanks
Ch 02 error code
CH02 Inlet pipe sensor Open / Short circuit
Can you help me please
Hello
Splique en français