THREADING THE OVERLOCKER
HTML-код
- Опубликовано: 7 окт 2024
- In this video we will show you how to thread Chinese overlocker/serger Meishi GN1-1. It’s not hard, but it’s tricky.
►NOTE◄ First unplug the power cord for safety!
Use tweezers to thread the overlocker easier.
☼ Threading the upper looper: 0:08
►NOTE◄ Removing the side plate is optional You can thread the upper looper without removing the side plate. However, if you remove it - use a magnetic screwdriver, because the screws are very small and you can lose them.
☼ Threading the needle: 2:48
In my experience I found that the tension dial on the needle thread should be tighter than the upper and lower loopers. But this may vary for the different types of threads.
☼ Threading the lower looper: 4:27
►NOTE◄ The flywheel must be rotated only towards the back of the machine /clockwise/
🧶 Like & Subscribe for support!
❤️ Facebook: goo.gl/mC9cP0
❤️ Instagram: / artofclay.bg
📧 Collaborations/Sponsorships: artofclay.bg@gmail.com
☕ Enjoy the content? Support me with a 'Super Thanks'! Click the button below the player to buy me a virtual coffee. Your generosity keeps the content coming! 🙏
►MUSIC:
Intro - Jim Yosef - Lights [NCS Release]
Defqwop - Awakening [NCS Release]
OUR PLAYLISTS:
★POLYMER CLAY: goo.gl/rMdqFJ
★POLYMER CLAY TIPS: goo.gl/aq74YG
★SEWING FOR BEGINNERS: goo.gl/GFriEQ
★DIY IDEAS: goo.gl/Y9chwi
★GARDEN: goo.gl/xhIbDk
★BLOOPERS,OUTTAKES & BEHIND THE SCENES: goo.gl/Ljj6fk
★FACEBOOK PAGE VIDEOS: goo.gl/tgWB05
===============
CHECK OUT OUR SECOND CHANNEL:
►goo.gl/z4QjW8
❤FACEBOOK PAGE: goo.gl/FmVBFh
❤TWITTER: / artofclayblue
OUR PLAYLISTS:
★FREE FOOTAGE: goo.gl/nPKi77
★TIME-LAPSE VIDEOS: goo.gl/g3bCfY
===============
♫MUSIC:♫
►Connect with Audio Library: goo.gl/MTsLfM
►Connect with RUclips Audio Library: goo.gl/vlaaZr
►Connect with NCS:
• / nocopyrightsounds
• / nocopyrightsounds
• / nocopyrightsounds_
• / nocopyrightsounds
• / nocopyrightsounds
• / ncsounds
• bit.ly/SpotifyNCS
This is the only video I could watch on 2018. Helped me a lot to use my Yamato machine...
I'm glad the video helped you with your Yamato machine. Happy sewing! 🧵
Thank you. For so long a time, I've not been able to use my interlock machine. The illustrations guided me. Thank you.🙏
My wife bought this machine 18 years ago and she has just figured out how to thread it because of your video. Thank you.
Thank you very much for the feedback! I am glad to hear that the video was helpful. Best wishes!
@@ArtOfClay q
@@nelsonaliasot4998
thank you for your video i know now how to thread my machine, but i have a problem on the thread the upper and lower threads always cut off. can you help me what to do with this?
L@@fouziaasi951
Pfff thanx a lot. After 30 years on the attic , after a find on the street in Amsterdam he finally works again. Like a fine tuned steam machine Wat a good quality
For the past 4 years have gotten this machine, I never use it before of the settings. Your illustrations help me out.. thanks a lot..😊
Best over lock teaching video in RUclips channel. I don't know any basics in over lock machine. After watching this video, now I can able to do changes in over lock for connecting the threads. Thank you once again for this wonderful video. Keep rocking 🎉
Thank you very much for your comment! 😊
Look at me, am now a professional. Thanks for the tutorials.
Thank you so much!!!! I thought I ganna get in trouble for breaking my aunt machine, but thank to your video, I fixed it!!!!
That's great to hear! Thank you for your comment. Happy holidays! 🎄
U are a life saver..the machine almost frustrated my life. God bless you
Parabéns você foi o único que me fez realmente entender como passar as linhas 👏👏👏👏👏👏♥️♥️♥️♥️♥️
Thank you so much, this just made my day. My machine as been there for days just because I didn't know how well to pass the thread. God bless you
That's great to hear! Thank you!
Thank you I just got mine yesterday and am still learning how to thread it. This video is very helpful ❤
Good luck and happy sewing! 😀
Excelente explicación. Video muy ameno. Muy bien hecho. Nunca había enhebrado una remalladora. Con este video dejé a mi madre más que feliz. Pude enhebrar sin problemas los 3 hilos en las 2 lanzaderas y la aguja.
Very good explanation. Many thanks. Without this very well done video I would never make the thing done.
Thank you very much for the comment. :)
Wow veeery good video! Couldn't have demonstrated it any better! Thanks a lot! Bless
Thank you very much. My mum has exact machine. I did it correctly by watching this. Perfects. Thanks a lot...
You're welcome :)
I never ever sean
This is absolutely correct
Professional are always showing capacity of professional personality ❤❤❤❤❤
Thankyou soooomuth maym ji🙏🙏🙏🙏🙏
You are God sent!!I keep referring to this video very often.I used to pay someone to do this !but now I can save some coins.A big thank you from a self taught fashion designer in kenya.God bless you
Thank you very much for the comment! :)
....
To the point and easy to understand. Helped to thread my machine for the first time. Thanks!
Thanks for the feedback. 🙂
I have never used an interlocking machine before but this video helped me thread mine without a hassle. Very very helpful video! Thank you very much!
Thank you for the kind words! Wishing you lots of luck! 😜
Thank you for this video. It helped me thread my machine yesterday. Thank you.
Thank you mam ❤️ very helpful to me because i bought 10 days before but i don't know what to do? But i started now learnt more from your guidance thank you for your vdo ....
Thank you. I just bought this kind of machine. This video will help a lot.
Muchas gracias... compré esa máquina de uso...
Se le aviso reventado el hilo de abajo..
Estaba muy preocupada ..y su video me ayudado a hebrarla... gracias muchas gracias.
Resivan saludos desde cotzintla Veracruz México
Best tutorial video ever
You're the best tutor 😍
Your comment truly made my day, and it's an amazing birthday gift to receive such positive feedback. Thank you, and have a fantastic day! 😊
This is best video I have watched so far... I don’t usually comment on RUclips but I just have to. Thanks so much God bless you
Thank you for taking the time to write me a comment. I deeply appreciate it!
Have a warm holiday season and happy sewing! 🎄🎄
🤨.
Thanks so much, your video really assisted me in threading my machine
Very straight forward video
Please what type of thread should I use for the over locker?
Hi, thank you for your comment! For this overlock you have to use polyester high speed sewing thread. I am using 120 spun polyester spools.
Qué bonita máquina! Se ve antigua😍, muchas gracias por mostrar🥰👍💕
Thank you so much.I've learn a lot from you.this really helps me in my sewing journey
You're welcome! I'm delighted to hear that my video has been helpful to you in your sewing journey. Keep up the great work, and happy sewing! 😊🧵
Thank u ,excellent I have a 3thread locker and have not use it because I can't thread it,now I can.Appreciate.
Thanks :)
Thank you so much. I was able to thread my machine using this video as a guide.
Perfect overlock threading video I ever watched 👌
Thank you! ☺️
wow ang galing ..gmyan kc edging nmin .dp ako mronong mg soot ng sinolid..slamt s pag demo .
God bless.
Большое спасибо за подсказки,давно такой стоит без использования. Буду пробовать заправлять и шить!
Salamat sa mga ttutorial sa threading ng overlocker, sana magpatuloy at hindi magsasawa sa pag bahagi ng inyong kaalaman.
🙏😊
My mom has exactly the same machine. Just looked at it just now and was trying to figure out the threading. Thank you very much.
Thanks so much..
The best video in the world! Thank you so much ❤❤❤❤❤🇧🇷🇧🇷🇧🇷
Thank you for your comment! ❤
I got value from it, much appreciated
This video is a life saver..... it is very very useful and informative.... 👌
Thank you! 😊
Thank you. I was able to understand it, perfectly.
I'm glad to hear that! 🙏😊
Great job.
It will be appreciated if you can make videos on Solving Problems of Overlocking Machine ẹ.g. how to adjust stitches etc
me encanto, muy bien explicado. Mi maquina saltea puntos, tendran un video que explique como solucionarlo? gracias
👍👍👍👍👍👇
Спасибо огромное!!! Теперь так классно верложит,а меня не правильно раньше информировали, ещё раз огромное спасибо!!!
thank u so much its really help me a lot because thats my edging too👏👏👏👏
Thank you so much, I can now thread on my own❤
Very good video, figured out mine with one look at the tutorial.
=
It comes out beautiful. Thank you so much.
Thank you so much for these videos,I have learnt a lot.
Kindly do one on skipping stitches
Exactly my machine........ I couldn't have threaded it without your video, thank God for sending you! I'm grateful 😘😘😘😘😘
Thanks for the feedback and happy sewing! :)
Seriously THE best video, thank you
Thank you very much for the kind words! :)
thanks for sending this
Thanks, the video helped me and now I know how to thread the machine. My machine is the same as yours and my problem is that the press does not rise and it is difficult for me to insert the cloth and also to place it.
Thanks a lot. I have had this machine for almost three months now. Just setting it up with this video because there was no details in the manual l
Magkano po ganyan
Muchas gracias desde Medellín Colombia no creí encontrar la explicación ya que es tan antigua muchas gracias👍👏
Thanks!!! This machine is tremendously complicated for me bur you have made it easy to understand putting threads
Thank you very match from algeria ❤
Cám ơn bạn rất nhiều đã bỏ thời gian hướng dẩn cho chúng tôi hiểu được nhiều xâu chỉ
Thank you for sharing 👍
Such an amazing method..
It works very well...
Thanks a lot!!!!!
Thank you for this video it help mi thread my machine. 👍
Hello thank you so much i managed to fix thread in my new overlock machine
😊
Have a blessed day thank you sooo much for your sharing great vedeo for yamato edging 🥰👏🙏🤗
You're welcome! I'm glad that you enjoyed the video and found it helpful. Have a blessed day as well! 🙏😊
Vídeo direto sem enrolação zom maravilhoso brasileira agradece, obrigada por ensinar 👏👏👏👏
Thank you
☺️🙏
Thanks. Very clear guide.
Very clear video
I really thank you for this vídeo. That is what I was looking for
You're very welcome! I'm glad the video was helpful for you. 😀
Thank you very much for this useful video from Senegal !
You're welcome! 🙂
This is the best and clearest video I have seen about threading an overlock machine. Thank you very much for doing such an excellent job. This is very very helpful for newbies like me.
Thank you for the beautiful comment!
ลาคาเทาไร
Thank You!
I've been so stressed!😂😂
🤣
Gracias por el vídeo al fin pude enebrar mi máquina ahora pregunto siempre tiene q llevar un hilo de seda ? O pueden ser los tres de poliéster? Gracias
I am using only polyester threads, and I've never used silk ones. The salesman in my local store told me to use only polyester threads with the overlocker.
You can make a video where you explain how to adjust the presser so that it rises. If you already have it, you can tell me what it is. You explain very well. Thank you.
The machine is designed for sewing only fabrics up to 4mm thick. Therefore the presser foot can be only raised slightly.
If it can't be lifted at all, you can try to reduce the presser foot pressure by slightly unscrewing the screw that sticks out behind the needle bar (on top of the machine). (If you look from the side, the screw leads directly to the lever to which the lifting pedal is connected).
Merciiiiiii enormément 🙏🙏🙏🙏 ca fait 3 jrs stréssée de ne pas s'avoir faire correctement 😊😊😊
Thanks so much for sharing. Really helpful
My pleasure! :)
wow yo creia que mi maquina era dificil pero mie que estas es mucho mas compricado pero muy bien espricado gracias
Thanks for this.... I did it perfectly....🙏
Un millón de gracias
Lo voy ha hacer.
Dios te bendiga.
it is very helpful.thankyou .
Can you please do a video explaining the tensions and the best practices and uses?
Your video helped a lot and this machines is pretty good when it works
I don't know how to explain it in a video. But you can try the following (this is my answer from another comment, about the tension): Simply, you should look carefully at the seam. On the top side of the fabric, there will be the upper looper and the needle thread. On the other side of the fabric, you will see the lower looper thread and the needle thread. The needle makes only straight stitches so the needle thread is the straight left line on the top side of the fabric
(the same line when you turn the other side of the fabric). The looper threads are triangular/drops shaped. You need to see (onto the seam) if the threads are too loose or too tight and adjust the tension dials.
You can use different colored threads and see the results on the seam.
* The upper looper's tension dial is that onto the right side of the machine. The needle tension dial is on the top of the machine and to reach the lower looper tension dial, you should open the door/cover on the left side (near the hinges).
** Another thing to know - (It may be working only for me), but my needle tension is very tight when I try to pull the thread, from the tension dial (NEVER PULL THE THREAD FROM THE NEEDLE) I have a feeling that it will break, so you can try to tighten the needle tension dial.
PS. Sorry for the late response.
Very clear and beautiful. Thank you so much for this tutorial.
Happy sewing! 😊
grabeng buwis buhay naman toh..hahaha..pero kakabili ko lang nung ganyan ko.salamat
Thanks for watching your video, very helpful to me, how to do thread the over lock sew machine
Thank you so much, u just saved me.
والله يعطيك الصحة كي فهمتنا ربي يجازيك الخير
This was so helpful tnx a million times
Thank you very much..This video is very use ful
Спасибо большое, это единственное подробное видео, где все понятно показано👍👍👍👍
Спасибо за комментарий! 😊
Лилия, поддерживаю вас! Действительно это единственное видео, где очень четко с отличным освещением все досконально показано. На сегодня у меня есть четырехниточный, а этот оверлок давно стоит без дела, решила заправить на всякий случай. Респект автору ролика!!😘💓👍
Спасибо за добрые слова! 💐
this video was so helpful learning how to thread this machine.. do you have any advice on tension? trying to locate all the tension knobs. having an issue with
I don't have a video about setting the tension. I just don't know how to explain it the way I want to be explained... Simply you should look carefully at the seam. On the top side of the fabric, there will be the upper looper and the needle thread. On the other side of the fabric, you will see the lower looper thread and the needle thread. The needle makes only straight stitches so the needle thread is the straight left line on the top side of the fabric
(and the straight right line when you turn the other side of the fabric). The looper threads are triangular/drops shaped. You need to see (onto the seam) if the threads are too loose or too tight and adjust the tension dials.
You can use different colored threads and see the results on the seam.
* The upper looper's tension dial is that onto the right side of the machine. The needle tension dial is on the top of the machine and to reach the lower looper tension dial, you should open the door/cover on the left side (near the hinges).
** Another thing to know - (It may be working only for me), but my needle tension is very tight when I try to pull the thread, from the tension dial (NEVER PULL THE THREAD FROM THE NEEDLE) I have a feeling that it will break, so you can try to tighten the needle dial.
Useful information about the machine.Thanks for sharing.
I’ve followed your instructions carefully and they’ve been very helpful.
But why does my thread cut every 5 mins? It’s frustrating to have to keep rethreading every other minute. What could be the cause and what do you recommend?
Thank you for your feedback. I assume you're experiencing issues with the thread on the lower looper. Here are a couple of steps that might help resolve the problem:
Firstly, check and adjust the tension. Incorrect tension can cause thread breakage so make sure the thread tension is properly adjusted.
Secondly, make sure the thread isn't old or dried out. Test its strength by gently pulling it; if it appears weak or aged, switching to a fresh spool of thread might solve the issue. Even if the thread seems strong and visually fine, different brands can affect performance, so trying another spool might be beneficial.
I hope these steps will assist in resolving the problem.
@@ArtOfClay Its the thread that does directly into the needle that keeps breaking. It's my first time using the machine so I'm not sure where the tension is or how to adjust it. Do you have a video for that?
Then, you can check if your needle is not blunt and if it is installed correctly. I don't have a video about setting the tension, but there are 3 knobs used to regulate the tension off all three threads.
This comment may help you with setting the tension: (this is my answer from another comment, about the tension): Simply, you should look carefully at the seam. On the top side of the fabric, there will be the upper looper and the needle thread. On the other side of the fabric, you will see the lower looper thread and the needle thread. The needle makes only straight stitches so the needle thread is the straight left line on the top side of the fabric (the same line when you turn the other side of the fabric). The looper threads are triangular/drop-shaped. You need to see (onto the seam) if the threads are too loose or too tight and adjust the tension dials.
You can use different colored threads and see the results on the seam.
* The upper looper's tension dial is on the right side of the machine. The needle tension dial is on the top of the machine and to reach the lower looper tension dial, you should open the door/cover on the left side (near the hinges).
** Another thing to know - (It may be working only for me), but my needle tension is very tight when I try to pull the thread, from the tension dial (NEVER PULL THE THREAD FROM THE NEEDLE) I have a feeling that it will break, so you can try to tighten the needle tension dial.
Excellent! And I am hoping I can get mine threaded now!
Machine ya overloki shingapi
Hi! Thank You so much for making the video. I was just thinking whether to buy it or not cause without the thread instruction it would take a week at least to figure it out. But I don´t have this kind of table and so doesn´t the person I am buying from. Does this machine work just on a normal table as well (without the hole in table)? Or will the engine stop me somehow? Also I am missing a thread stand, as it takes a month to deliver from abroad, but there is no good affordable thread stand in my small country. Could it work without a thread stand as well? Or what alternative would you recommend for thread stand? Thank You so much!!!
Hi, thank you for your comment! The machine is sturdy and built to last a long time. However, it's important to note that it's heavy and lacks modern conveniences like easy-to-use buttons and knobs for changing settings quickly. It's best suited for those who don't need to adjust settings frequently. Initially, it can be temperamental, but once you're familiar with it, it's an excellent machine.
The engine is attached to the back, so it doesn't need to be mounted on a specialized table. I have mine on a regular desk, and I simply made holes for waste fabric and pedals, though these aren't necessary.
When I purchased the machine, it was mounted on a wooden board with a thread stand. The machine requires a thread stand for smooth thread flow from the spools. If you don't have one, you can make a DIY stand from a metal clothes hanger or wire. Just ensure the threads flow smoothly from the bobbins to the machine.
Thank you God bless you too
Thank you so much more easily for me.
You saved my life
Best instruction video ever! Finally know how to thread this machine. Thank you so much!!
You're welcome! Thanks for the feedback! :)
We have same sewing machine after following this method my machine wont make chain? What's the possible problem? Btw, very clear tutorial easy to follow. ❤
Check if the needle is inserted correctly. You can also change it (if it's dull or bent). Check the needle tension too. When you thread the machine, all the threads must go under the presser foot.
It can be also a problem with the timing.
These are the things I can think of.
@@ArtOfClayplease what could be the problem for the last thread cutting , after following your tutorial I used same method to thread mine, but I noticed that the thread from the back kept cutting after 2inch of weaving, I just bought my machine newly and the needle was set up from the manufacturer. Please help
There are a few reasons why the lower looper (back thread) thread breaks. Check if the thread passes through the little hook inside... ( 05:40 ). Check your thread - perhaps it's weak, dried out, and can break easily.
Finally, check if the tension is not too tight.
Is there a way to adjust how far the pressure foot raises? Mine only lifts by a few mm so it’s hard to get the fabric underneath
The instructions say that the machine cannot sew more than 4 mm thick fabrics. Therefore, I think this is the maximum.
Perfect. Thank you!
Como passar a linha na chinesinha de duas agulhas
Faz 2 anos que comprei nunca usei ,esqueci como liga, meu tem o motor gente esqueci tudo ,está travado na roda do lado ,adorei encontrar preciso relembrar tudo .
شكراً لك على هذا الفيديو لي ايام وانا حائرة كيف اعمل بها وشكر لصديقة هي التي دلتني على هذا الفيديو
Thank you so much God bless you.