To remove the other side panel that doesn’t have the stick out grab-pull handle. There is a hidden bolt beneath the hollow type pull handle that is in the mid arm rest area, just aft of the window switches . Use a fine edge tool to remove the silicon type rubber base liner in the bottom of that pull/hollow area. There is a long silver torx hidden under there. In total there are 3 black torx and one silver torx to remove before popping off the panel. The 3 black Torx are situated like the door in this video. One under the wood trim, aft of the door release handle, one forward of the door release handle under a small plastic trim just forward of the door lock buttons, then the third is same as the first one the gentleman took out at the start of the vid down under the door panel area that is easily visible. Hope that helps somebody, out. Thanks for posting this vid Sir. It really helped me. Cheers from Australia 👍👍🍻
Dude i want to thank you for taking the time to make this video. It saved me from having a conniption. I've had to replace the foam surrounds for both speakers. Removing the door panel on the driver's side was straight forward but the passenger side was tricky.
The door panels are not the same. One door has a stick out type grab handle, one has a hollow type pull handle. I added an extra comment in the comments here that explains how to remove the other panel. This was a very helpful video. Thankyou Sir! 👍👍 Cheers 🍻
To remove passenger door handle press something like a small hex wrench into the hole on the back of handle (feel hole down low on backside of handle). Press hex wrench into hole and cover pops right off.
To remove the other side panel that doesn’t have the stick out grab-pull handle. There is a hidden bolt beneath the hollow type pull handle that is in the mid arm rest area, just aft of the window switches . Use a fine edge tool to remove the silicon type rubber base liner in the bottom of that pull/hollow area. There is a long silver torx hidden under there.
In total there are 3 black torx and one silver torx to remove before popping off the panel.
The 3 black Torx are situated like the door in this video. One under the wood trim, aft of the door release handle, one forward of the door release handle under a small plastic trim just forward of the door lock buttons, then the third is same as the first one the gentleman took out at the start of the vid down under the door panel area that is easily visible. Hope that helps somebody, out.
Thanks for posting this vid Sir. It really helped me.
Cheers from Australia 👍👍🍻
Dude i want to thank you for taking the time to make this video. It saved me from having a conniption. I've had to replace the foam surrounds for both speakers. Removing the door panel on the driver's side was straight forward but the passenger side was tricky.
Brother, I'm super glad I could help in any way. Thank you
How did you do the other side?
The door panels should be the exact same from side to side.
The door panels are not the same. One door has a stick out type grab handle, one has a hollow type pull handle. I added an extra comment in the comments here that explains how to remove the other panel. This was a very helpful video. Thankyou Sir! 👍👍
Cheers 🍻
To remove passenger door handle press something like a small hex wrench into the hole on the back of handle (feel hole down low on backside of handle). Press hex wrench into hole and cover pops right off.
So if I just want to replace the wooden trims - it’s just a pop up thing like in the video?
Great tip bro.. great video
Thank you i shared on my facebook. I will try it.
Thanks was very helpful
Your the man! Thanks
Excellent video. Thank you.
What is the dimensions? Thanks
Professional !
good video, thx!
👍🏻
Thanks a lot!
What about drivers door?? Thats not the same!!
Hey du siehst genau wie Deutsche Komedien " Kaya Yanar " :)
You said take your time but you give me anxiety jhst because you seem to be so agitated and hyped up..... good vid tho