Great channel, I take a lot of important information for myself. I own a Yamaha Virago 1100, 95 year of manufacture. live in Russia. Thank you for the video, continue your work.
Спасибо за вашу работу, как раз собрался снимать и отдать на порошковую покраску. Информация как это сделать есть только у тебя. Единственное, я думаю что внутреннюю обойму подшипника я не буду вытаскивать, их в России сейчас сложно купить.
Ohh mate I can't recommend it enough to get a bike lift... Changed my life completely, I'm thinking to make a review about it, but first I need to finish the bike which is on it. 😉
Great video, thank you !! I have no issues in removing it, but I am concerned about aligning / centering it when putting it back on... Question: Is there much of a process re-installing the swingarm as for 'centering' it...? Are there shoulders that automatically center it or does it require measuring...?
Your welcome.. Glad you like it. Unfortunately it is not my bike and have no idea what make the bag support bars are. In a long term plan I would like to make my own bars out of stainless steel, but that's far away. I can send you a few pictures in email if you want to , but I don't think I'll make a video about it, sorry.
Hi, thank you, really appreciate it. Both 1100 I have worked on needed new exhasut so I can't say for sure, but I think you should be able to do it with the exhasut still attached..
Is it possible to install the wheel with the male and female splines not lined up. I just took my virago 1100 to a mechanic to get the rear tire changed, and after he install the wheel, now there's noise coming from the driveshaft and wheel where it meets the drive shaft. Sounds like a tapping , as if something is hitting the walls of the driveshaft or if there's binding. It happens when the bike is in gear while on the center stand and wheel moving without any acceleration. It does it in all the gears, and it's louder in 5th gear. Any ideas? Thanks
Hi, short answer is no. However there is a spacer inside the wheel and if he left that out it may cause some problems. Regarding the tapping noise while on center stand, if it's not continuous and fairly mild than that is considered normal. What you hear is the play between the gears from the final drive all the way back to the gearbox (especially if you just leave the bike on idle) v-twins doesn't idle super smoothly. If it is very noisy and continuous then your universal joint maybe on it's way out. You can chek how big is the play by putting it in gear, on the center stand with the engine off, just move the wheel and you'll see how much it moves back and forth before it engages the gearbox. It is very hard to tell you what could it be without actually listening to it. I recommend to join the "Virago owner's club " on Facebook and post a short video there, we will be able to help better that way.. facebook.com/groups/7272457493/?ref=share
Hello. I will have a look if automatic French available or not, but me personally can't translate it as I don't speak French. I have many carburettor videos on my channel, have a look around I'm sure you'll find them.
Great channel, I take a lot of important information for myself. I own a Yamaha Virago 1100, 95 year of manufacture. live in Russia. Thank you for the video, continue your work.
Thank you very much. Really appreciate your feedback. 😉🔧🔧👍
He's definitely very informative!!! Great videos!!!
I need this thanks!!
Absolutely spot on, and exactly what I needed. Thorough and brilliantly demonstrated explanations as always. Excellent.
Thank you very much.... Really appreciate your kind words. I'm glad it helped you 👍
Awesome video, they are getting more and more interesting. You have a well equipped Batcave there. Cool.
😂😂I know, I wish it was bigger, I just able to walk in now, I have to stop buying more tools.. 🚫😁
Great well explained video this guy knows his stuff
Спасибо за вашу работу, как раз собрался снимать и отдать на порошковую покраску. Информация как это сделать есть только у тебя. Единственное, я думаю что внутреннюю обойму подшипника я не буду вытаскивать, их в России сейчас сложно купить.
Beau travail ! Une vidéo bien détaillée , j'attaque demain. Merci 😉
De rien, je suis content que vous l'ayez trouvé utile ... bonne chance.
Ps: Google Translate 😉
Awesome video my man!👌 Looking forward to part 2!
Buenas tardes desde Madrid, aprendo con tus tutoriales. Me faltan las herramientas.
Thank you, I'm here to help. Don't worry about the tools, just buy them slowly, like I did over a few years. Eventually You will have all you need.
fantastic job !!! Gratula !! :)
Köszi öreg. Próbáltam érthetőre es könnyen követhetőre csinalni. 😉🔧🔧
Excellent Video as Always Mate :)
Thank you. Really appreciate it 😉
Nice one! I want to get my bike up on a table!!🤙
Ohh mate I can't recommend it enough to get a bike lift... Changed my life completely, I'm thinking to make a review about it, but first I need to finish the bike which is on it. 😉
Great video!!
Excellent video. Where did you get the bracket for the saddle bags?
Thank you..they came with the bike, so I don't know, sorry.
Great video, thank you !! I have no issues in removing it, but I am concerned about aligning / centering it when putting it back on...
Question: Is there much of a process re-installing the swingarm as for 'centering' it...? Are there shoulders that automatically center it or does it require measuring...?
Hello thank you. Me and an other member of the Virago owners Facebook group answered your questions, check it out.. 👍😉
@@MidlandCruiser Yup, I saw them; great stuff - thank you very much !!
Is it about the same as fo a XJ900f?
Hi. Thank you for your video!
Keep up the good work!!
Could you show us your saddlebag support bars?
Your welcome.. Glad you like it. Unfortunately it is not my bike and have no idea what make the bag support bars are. In a long term plan I would like to make my own bars out of stainless steel, but that's far away. I can send you a few pictures in email if you want to , but I don't think I'll make a video about it, sorry.
@@MidlandCruiser Ok. My email: mybardak@mail.ru Thank you.
Sent you a few email witht the pictures. Check your spam folder may end up there... 👍
wery good video man
Sweet!!!
Hi there. The video is perfect! I am running a750 from1992 prod.year. Can I do the swingarm removal without dismantling the exhaust off the bike?
Hi, thank you, really appreciate it. Both 1100 I have worked on needed new exhasut so I can't say for sure, but I think you should be able to do it with the exhasut still attached..
@@MidlandCruiser Thanks for the quick reply mate! Will try and post the result.
@@borilapostolov4419 your welcome... Honestly I think you'll be fine 👍
@@MidlandCruiser Can I ask something else here about speedometer issue, or send You an e-mail?
@@borilapostolov4419 sure send it to midlandcruiser@gmail.com 👍
Is it possible to install the wheel with the male and female splines not lined up. I just took my virago 1100 to a mechanic to get the rear tire changed, and after he install the wheel, now there's noise coming from the driveshaft and wheel where it meets the drive shaft. Sounds like a tapping , as if something is hitting the walls of the driveshaft or if there's binding. It happens when the bike is in gear while on the center stand and wheel moving without any acceleration. It does it in all the gears, and it's louder in 5th gear. Any ideas? Thanks
Hi, short answer is no. However there is a spacer inside the wheel and if he left that out it may cause some problems. Regarding the tapping noise while on center stand, if it's not continuous and fairly mild than that is considered normal.
What you hear is the play between the gears from the final drive all the way back to the gearbox (especially if you just leave the bike on idle) v-twins doesn't idle super smoothly.
If it is very noisy and continuous then your universal joint maybe on it's way out. You can chek how big is the play by putting it in gear, on the center stand with the engine off, just move the wheel and you'll see how much it moves back and forth before it engages the gearbox. It is very hard to tell you what could it be without actually listening to it.
I recommend to join the "Virago owner's club " on Facebook and post a short video there, we will be able to help better that way..
facebook.com/groups/7272457493/?ref=share
@@MidlandCruiser thank you very much, that definitely helps me out a lot. I'll remove the wheel and take a look at it.
Genio
What kind of bearing and seal did you use pls?
Here is the bearing I used Koyo 30203JR ebay.to/3f582E6
And here is the seal I used SKF CR25x40x5HMSA10RG ebay.to/3nnDZdF
@@MidlandCruiser nice job bud, cheers 😉
Hello
Thabk you.
Could you please to translate in french ? And du you have vidéo carburateur ?
Hello. I will have a look if automatic French available or not, but me personally can't translate it as I don't speak French. I have many carburettor videos on my channel, have a look around I'm sure you'll find them.
Жаль что в России нету такого человека который про вирагу волосы пилит(
Походу надо начинать английский учить))
Full throttle
🤔