Having waited ( so far ) near on 11 months on a Reximex Ixia gen2 in FAC, also Turkish, I suggest you don't hold your breath. That said, Thanks for showing Dan, always good to see what's coming.
Hi Henry! I've contacted our suppliers and the Ixia FAC rifles don't have enough demand at this moment in time for the importer to make an order however they're going to let me know if there's any change. I'll let you know as soon as I hear anything. Thanks Henry and all the best.
Just to be clear. No blame directed at BDA ( Dan ), Wasn't ordered through him. However, " not enough demand " Is at least the forth reason ( excuse ) I have had either, relayed to me, or heard direct from the importers. Damn shame, as on paper, the Ixia ticked most of the boxes, for me.
@@henrymoreland8719 Hi Henry. Yeah the Ixia would make a superb FAC rifle but finger's crossed and if demand does rise they'll definitely get them on the way. I actually directly spoke to the importer upon reading your comment and that was the official answer straight from the horse's mouth. So although it's not good news I'll admit at least we've got to the bottom of it. Thanks Henry and fingers crossed they get more interest in the future.
Hi Casper! I definitely think so all of the ingredients are there and the walnut model looks especially tasty! Don't want to say much until we have the production rifle in my mitts though.
Look ok initially but the bottle looks a bit to long for anything but a small (ie narrow) moderator to fit, unless of course the angle of the camera just didn't show us properly. It would as you mentioned, be nice to see a wooden stock perhaps? Nice little teaser to wet our appetite. 😁 👍
The grip is identical to those on Reximex rifles- seems like there is a single factory in Europe banging out rifles/actions for multiple brands and just changing the styling to their desired spec. Not necessarily a bad thing- if the actions are solid, then you get to choose the design you like from whichever brand is offering it...
Hi Neil! The rifles are made in Turkey and there's definitely a few similarities between them. The main advantage of the Edge is the regulator which is usually very uncommon on most Turkish guns. I've tested a few of these and through the chrono they're superb with single digit spreads over the usual 10-20 shots. Interesting rifles for sure.
@@ttuktargettime4905 Get up earlier? Never! Yeah it's an awkward one isn't it? I think this has been one of my worst years for reviews I've barely done any of them mate. I'm trying to free up some spare time at the moment and then I can hopefully rapid fire some videos out there. Cheers Justin and keep it up mate.
@@bigdansairguns83 you to Dan, nobody at the min is putting anything out review wise apart from Mr A Grey but even his are not reviews, the world at the min is not working as it should inc. our sport bud, let's hope it gets better mate, keep punching that paper 😁
Thanks Jeffery! I'm not a major tactical fan myself and this definitely straddles the line between a smart bullpup and Walter Mitty Rambo rifle. That said the walnut is a fantastic looking gun and what with it coming with a regulator will definitely make it stand out compared to the competition.
Hello Dan Very nice to see you back to what you are really good at Describing the gun extremely well And I have to say another belter I like this However my good man I’m still waiting on you doing the review of KRAL EMPIRE X And remember to also add in the Terminator 177 s Take it easy I’m glad you are busy especially today s so called U.K = United Kingdom and every ones sitting around waiting on stock and bullet s the prices going through the roof. Brexit yep those who wanted to jump ship
Hi Prof! I haven't forgotten buddy the Empire will be coming soon. Things are mad at the moment aren't they? I've advised everyone to buy as much lead as they sensibly can. Once the lead ban kicks in here prices are sure to skyrocket. Get what your guns like while you can matey.
This is a really nice platform. I would love to see what the .22 cal in FAC is capable of with accuracy. As you know my favorite hunting pellet is the Daisy Hollow Point 15.4 grain and am curious how they group in this rifle. They should…if this barrel is like my other .22 cal barrels…have the same POI as JSB Hades. I never have to re-zero the gun between those 2 rounds out to 50 yards. Both should be well under sub MOA. Looking forward to your review on this gun. Till then God bless.
Hi Heath! It's an interesting thing isn't it? I still need to get my mitts on those Daisy pellets but it's hard to find an importer for them in the UK. I think the Edge-X will be pretty popular with the tactical crowd and especially the boys that like using night vision, plus it's another Turkish rifle with a regulator like the Reximex Ixia and Mito, if these are successful finger's crossed we might start seeing some other rifles being built with regs like the Krals. Thanks Heath and look after yourself buddy.
Hi Al! I couldn't tell you off the top of my head but the new models have lightened triggers and they are definitely adjustable. Sadly I don't have an exact number for the pull weight however. Thanks Al and I hope this helps.
Hi Phillip! From what little testing I've done with this particular rifle it shot very very well at 30 yards. The Turks are knocking out some excellent barrels lately.
Mmm I think I’m looking at my new gun? As I was watching the film I was thinking I wonder if they are going to do it in a walnut stock? Then you said the magic words! And if it’s price around £600 then I’m in 🙌🏽😎👍🏽
Hi Lloyd! Take a look at some of the images online at the walnut it's a pretty looking little thing too especially if it has the marine barrel. Thanks Lloyd, it'd be nice if we could get the walnut when we do the review to stand if alongside the black.
@@bigdansairguns83 I don't know I'm useless with Tek. It only started on your last video all that rest are ok. Have you tried that scope's out yet and are the any good for springer? I'm looking at getting one for my Remington express compact .
@@erikball7215 Hi Erik! They're a nice little scope to be fair. That said I'd probably take a Konus or a Hawke over the Milbro as I find the sight picture a bit small on these and the reticle is a bit busy for my tastes. It should stand up to an Express no problem at all though.
Hi Bob! I can't say too much yet until we get the production models in but from what limited testing I've been able to do with the rifle quickly at 30 yards it seems pretty much spot on. 20p groups at that distance. The Turkish barrels have really come on leaps and bounds. It'd be fantastic if the .177 could mimic the results we were getting from our Pretensis!
Hello Dan - very interesting this one ! But I hope this being a pre-series gun, it is not too late to make some critical remarks from which the production versions could benefit. . Maybe ASI could use their clout to get Rainson to redesign the buttpad to be also vertically adjustable. This is very much needed for bullpups and semi bp's. I would like to see more detail of the extension parts of the pad to see if it could be made longer than shown and to see how solid / rigid it is. You might try your substantial muscle to try that also - wriggling around a bit. Also the height over which the cheek rest is adjustable seems quite limited. I do appreciate that there may be too little space inside the butt assembly for that however. A basic design aspect that cannot be corrected is the short length over which the barrel is clamped. That's for another model, unfortunately... The short barrel tenon is less obvious because it's masked by the side "pic" rail assy. ALSO, I don't quite see why they fitted a STEPPED RAIL on top of the action. Possibly the lower part serves for red dot type of sights ?!
QD sling mounts aren't new they've been around for probably 25 years and they're on a few different air rifles and they're nice but if they're not a good quality ones the amount can pop off and the gun come smashing onto the ground.
Hi Derrick. They're certainly a rarity and to my knowledge new to the UK. Although obviously not enough to give a proper verdict I've had a play with these (clicking them is addictive) and they seem pretty tight/well made so finger's crossed no issues should arise there.
@@bigdansairguns83 hello big Dan ....the Walther Reign has QD Mount holes also and I believe those are in the UK and it is super scary when comes undone I caught mine in mid-air before it actually hit the ground but I could see it actually happening easily.
@@gumbystown Hi Derrick! Honestly I never knew the Reign had them but then we only stocked them very briefly. The QD studs on these lock in really positively so finger's crossed it shouldn't be a problem.. that said the only way we'll find out is in a few years when they've had plenty of use and abuse. Only time will tell on this one Derrick I guess matey.
Hi Steve! It'd certainly knock the weight down a tad.. the question is how much it'd increase the costs however. What will be interesting is how fast the tuning companies react and make aftermarket bottles etc. Thanks Steve and I'll pass it on to A-S-I, who knows!😉
Hi mate! A fellow reviewer I'll make sure to subscribe buddy! They're not externally adjustable but the regulator is an adjustable unit, I've just spoken to A-S-I and the first batch will be .177 and .22 only. That said Rainson do make a .25 and if interested I'm sure we could have one coming our way on special order for you. Thanks Reeve and all the best!
Hi John! They should be ready by very early August finger's crossed. Take that with a slight pinch of salt though as you know what shipping dates can be like.
Looks good Dan, is it kral ish?? Umm. What kind of barrel are we talking about... Cold hammer forged?? Choked?? Anyways I hope it performs as good as it looks.. ATB jules..
Hey B.A! It's certainly..Turkish.. I don't think she's cold hammer forged but I'm quite confident they're choked but we'll find out on the production model to see what's going on up the spout. We'll soon find out matey! Thanks Jules!
@@bigdansairguns83 appreciate the reply. Thank you 🙏 This is great news for Airgunners. New companies will drive innovation and quality as competition. Fingers crossed 🤞
Hello mate. Yes they are. I've just got off the phone to A-S-I and they will be getting FAC rifles. Pricing for the black you can see here will be circa £600 or £699 for the camo or walnut.
Hey Sammy! From what I can gather it should be around or maybe just under £600. Prices are still a bit TBA at the moment but when we get the production batch I'll do a quick review with all of the details. Thanks Sammy and I'll keep you updated.
Bu tabancayı aldım ama hava kaçağı var ve tabancanın ucundaki ateşleme odası atış bitene kadar hava basıncı almıyor lütfen açıklayıcı videolar çekin lütfen tabancanın dipçiğini atış yapılan taraftan çıkarın Bu silahı satın aldığım ve düzgün çalışmadığı için iğneyi tamamen sökün veya tamamen sökün.
Hi Christopher! Around £600 judging from what I've heard so far but we can't be certain until they actually land. I'll let you know as soon as we have a concrete number.
It seems to be an interesting rifle for having a large air tank which adds a lot of autonomy, the design of the stock seems to be also attractive except in the area between the barrel and the regulator valve which is in my opinion very ugly in contrast to the rest of the rifle .
Hi Carlos! I agree, although I'm not a fan of "tactical" rifles I do like the looks of this one barring the regulator section. It's a genuinely sweet looking rifle in the walnut and who knows they might even change that area up a bit with the production rifles. Thanks Carlos! All feedback is good feedback and I'll pass it off to A-S-I.
Hi Matt. Tastes and smells Turkish too.. I even went to bed last night with a beard and long hair and then woke up with an amazing shave and haircut. She's Turkish alright!
Hi sir, this is Jill Blake from a gun gear brand. I am attracted by your performance in YTB and sincerely invite you to make a review video. If you are interested, please leave me your email. Then I will send you some products to see. Looking forward to your early reply.
Hi Jill! Thanks for getting in touch and I'm glad you enjoy our videos. We'd love to be able to review some of your products, if you'd like to get in touch you can Email us at bigdansairguns@outlook.com or get in touch with us at our website www.bigdansairguns.co.uk and visit out "contact us" section. Thanks Jill and all the best. Dan.
Welcome back nice to see you🤠
Thanks Yeti!
Having waited ( so far ) near on 11 months on a Reximex Ixia gen2 in FAC, also Turkish, I suggest you don't hold your breath.
That said,
Thanks for showing Dan, always good to see what's coming.
Hi Henry!
I've contacted our suppliers and the Ixia FAC rifles don't have enough demand at this moment in time for the importer to make an order however they're going to let me know if there's any change.
I'll let you know as soon as I hear anything.
Thanks Henry and all the best.
Just to be clear.
No blame directed at BDA ( Dan ),
Wasn't ordered through him.
However, " not enough demand "
Is at least the forth reason ( excuse ) I have had either, relayed to me, or heard direct from the importers.
Damn shame, as on paper, the Ixia ticked most of the boxes, for me.
@@henrymoreland8719 Hi Henry.
Yeah the Ixia would make a superb FAC rifle but finger's crossed and if demand does rise they'll definitely get them on the way.
I actually directly spoke to the importer upon reading your comment and that was the official answer straight from the horse's mouth. So although it's not good news I'll admit at least we've got to the bottom of it.
Thanks Henry and fingers crossed they get more interest in the future.
Look forward to seeing a full review looks very interesting 👍🏻
It shall be done Simon as soon as they're in.
@@bigdansairguns83 cool 😎
looks like it could be a cracking rifle mate, looking forward to the full review Cheers😁😁👍👍👍
Hi Casper!
I definitely think so all of the ingredients are there and the walnut model looks especially tasty!
Don't want to say much until we have the production rifle in my mitts though.
Look ok initially but the bottle looks a bit to long for anything but a small (ie narrow) moderator to fit, unless of course the angle of the camera just didn't show us properly. It would as you mentioned, be nice to see a wooden stock perhaps? Nice little teaser to wet our appetite. 😁 👍
Great showcase. Some cracking stuff coming out of Turkey. Will watch with interest.
Nice one Dan,waiting for the full review!😄👍👍👍👍👍👍👍👍👍😎😎😎😎
Thanks Alan!
The grip is identical to those on Reximex rifles- seems like there is a single factory in Europe banging out rifles/actions for multiple brands and just changing the styling to their desired spec. Not necessarily a bad thing- if the actions are solid, then you get to choose the design you like from whichever brand is offering it...
Hi Neil!
The rifles are made in Turkey and there's definitely a few similarities between them. The main advantage of the Edge is the regulator which is usually very uncommon on most Turkish guns.
I've tested a few of these and through the chrono they're superb with single digit spreads over the usual 10-20 shots. Interesting rifles for sure.
Glad ur back bud 👍
Thanks Justin! Let's hope it lasts longer than just three videos this time haha.
I'm the same bud only get so much time in a week and the months fly bye bud, the next few weeks I'll have to find time or get up earlier 🙄
@@ttuktargettime4905 Get up earlier? Never!
Yeah it's an awkward one isn't it? I think this has been one of my worst years for reviews I've barely done any of them mate. I'm trying to free up some spare time at the moment and then I can hopefully rapid fire some videos out there.
Cheers Justin and keep it up mate.
@@bigdansairguns83 you to Dan, nobody at the min is putting anything out review wise apart from Mr A Grey but even his are not reviews, the world at the min is not working as it should inc. our sport bud, let's hope it gets better mate, keep punching that paper 😁
Not my cup of tea the style but I am liking it can't wait to see your full review Nice one Dan for getting it out here 👍
Thanks Jeffery!
I'm not a major tactical fan myself and this definitely straddles the line between a smart bullpup and Walter Mitty Rambo rifle.
That said the walnut is a fantastic looking gun and what with it coming with a regulator will definitely make it stand out compared to the competition.
Hello Dan
Very nice to see you back to what you are really good at
Describing the gun extremely well
And I have to say another belter I like this
However my good man I’m still waiting on you doing the review of KRAL EMPIRE X
And remember to also add in the Terminator 177 s
Take it easy I’m glad you are busy especially today s so called U.K = United Kingdom and every ones sitting around waiting on stock and bullet s the prices going through the roof. Brexit yep those who wanted to jump ship
Hi Prof!
I haven't forgotten buddy the Empire will be coming soon. Things are mad at the moment aren't they? I've advised everyone to buy as much lead as they sensibly can. Once the lead ban kicks in here prices are sure to skyrocket. Get what your guns like while you can matey.
Hi pal, looks interesting, hope you’re well buddy 🤙
Hi Jon!
I'm not bad matey thanks ever so much I hope you've been keeping well, yeah it should hopefully prove to be an interesting little monster.
Sling studs look like standard QD cups.
Hey Clangerbasher!
They are indeed, it's an interesting way of getting around fitting a sling. It's nice and simple just like me. 😉
@@bigdansairguns83 The AR world have brought a lot of standardisation to the wider world of firearms.
This is a really nice platform. I would love to see what the .22 cal in FAC is capable of with accuracy. As you know my favorite hunting pellet is the Daisy Hollow Point 15.4 grain and am curious how they group in this rifle. They should…if this barrel is like my other .22 cal barrels…have the same POI as JSB Hades. I never have to re-zero the gun between those 2 rounds out to 50 yards. Both should be well under sub MOA. Looking forward to your review on this gun. Till then God bless.
Hi Heath!
It's an interesting thing isn't it? I still need to get my mitts on those Daisy pellets but it's hard to find an importer for them in the UK.
I think the Edge-X will be pretty popular with the tactical crowd and especially the boys that like using night vision, plus it's another Turkish rifle with a regulator like the Reximex Ixia and Mito, if these are successful finger's crossed we might start seeing some other rifles being built with regs like the Krals.
Thanks Heath and look after yourself buddy.
Any Idea what the trigger pull is set at? is it adjustable?
Hi Al!
I couldn't tell you off the top of my head but the new models have lightened triggers and they are definitely adjustable. Sadly I don't have an exact number for the pull weight however.
Thanks Al and I hope this helps.
Nice looking rifle, i wonder what it shoots like, ? Nice one dan ,😁👍
Hi Phillip!
From what little testing I've done with this particular rifle it shot very very well at 30 yards. The Turks are knocking out some excellent barrels lately.
Mmm I think I’m looking at my new gun? As I was watching the film I was thinking I wonder if they are going to do it in a walnut stock? Then you said the magic words! And if it’s price around £600 then I’m in 🙌🏽😎👍🏽
Hi Lloyd!
Take a look at some of the images online at the walnut it's a pretty looking little thing too especially if it has the marine barrel.
Thanks Lloyd, it'd be nice if we could get the walnut when we do the review to stand if alongside the black.
What is a marine barrel and can you change the bottle for a cf one?
You get four with the Hatsan gladius and three with the Hatsan AT 44.
F-four?!
Yeah but Keith... that's just ungentlemanly.
😉
The new Zbroia Hortitsia I believe comes with five or six stripper clip type mags too.
@@bigdansairguns83 SIX strippers with an airgun? Dang...
@@blomkransen The Ukrainians know what we like.
How long is the barrel on that prototype
The barrel is 58cm bud.
Hi Dan your video size still isn't right. Nice to see you back. Is that a 2020 scope You're hidding?👍
Hi Erik!
Might be haha. For me the video size seems fine? Maybe my laptop is acting out or something.. wouldn't surprise me the bloody thing.
@@bigdansairguns83 I don't know I'm useless with Tek. It only started on your last video all that rest are ok. Have you tried that scope's out yet and are the any good for springer? I'm looking at getting one for my Remington express compact .
@@erikball7215 Hi Erik!
They're a nice little scope to be fair. That said I'd probably take a Konus or a Hawke over the Milbro as I find the sight picture a bit small on these and the reticle is a bit busy for my tastes. It should stand up to an Express no problem at all though.
Looks great, particularly for the price, looks like the full package. But is the barrel any good?
Hi Bob!
I can't say too much yet until we get the production models in but from what limited testing I've been able to do with the rifle quickly at 30 yards it seems pretty much spot on. 20p groups at that distance.
The Turkish barrels have really come on leaps and bounds. It'd be fantastic if the .177 could mimic the results we were getting from our Pretensis!
Hello Dan - very interesting this one ! But I hope this being a pre-series gun, it is not too late to make some critical remarks from which the production versions could benefit. . Maybe ASI could use their clout to get Rainson to redesign the buttpad to be also vertically adjustable. This is very much needed for bullpups and semi bp's.
I would like to see more detail of the extension parts of the pad to see if it could be made longer than shown and to see how solid / rigid it is. You might try your substantial muscle to try that also - wriggling around a bit. Also the height over which the cheek rest is adjustable seems quite limited. I do appreciate that there may be too little space inside the butt assembly for that however.
A basic design aspect that cannot be corrected is the short length over which the barrel is clamped. That's for another model, unfortunately... The short barrel tenon is less obvious because it's masked by the side "pic" rail assy.
ALSO, I don't quite see why they fitted a STEPPED RAIL on top of the action. Possibly the lower part serves for red dot type of sights ?!
When you do the pellet test on the rainson, could you add the QYS Streamlined to the mix ?
Hey Charles!
If we review a .177 we certainly will. If we can get any that is!!
Thanks for the suggestion Charles!
QD sling mounts aren't new they've been around for probably 25 years and they're on a few different air rifles and they're nice but if they're not a good quality ones the amount can pop off and the gun come smashing onto the ground.
Hi Derrick.
They're certainly a rarity and to my knowledge new to the UK. Although obviously not enough to give a proper verdict I've had a play with these (clicking them is addictive) and they seem pretty tight/well made so finger's crossed no issues should arise there.
@@bigdansairguns83 hello big Dan ....the Walther Reign has QD Mount holes also and I believe those are in the UK and it is super scary when comes undone I caught mine in mid-air before it actually hit the ground but I could see it actually happening easily.
@@gumbystown Hi Derrick!
Honestly I never knew the Reign had them but then we only stocked them very briefly. The QD studs on these lock in really positively so finger's crossed it shouldn't be a problem.. that said the only way we'll find out is in a few years when they've had plenty of use and abuse.
Only time will tell on this one Derrick I guess matey.
would be so much better if it had a carbon fibre bottle
Hi Steve!
It'd certainly knock the weight down a tad.. the question is how much it'd increase the costs however.
What will be interesting is how fast the tuning companies react and make aftermarket bottles etc.
Thanks Steve and I'll pass it on to A-S-I, who knows!😉
Looks very interesting Dan. Is the regulator adjustable? Also is it available in sub 12 Ft/Lb in .25 Cal?
Hi mate!
A fellow reviewer I'll make sure to subscribe buddy!
They're not externally adjustable but the regulator is an adjustable unit, I've just spoken to A-S-I and the first batch will be .177 and .22 only. That said Rainson do make a .25 and if interested I'm sure we could have one coming our way on special order for you.
Thanks Reeve and all the best!
@@bigdansairguns83 Excellent Dan. Looking forward to your review.👍
How long do you think it will be when you will have them on sale
Hi John!
They should be ready by very early August finger's crossed. Take that with a slight pinch of salt though as you know what shipping dates can be like.
@@bigdansairguns83 Thank you for the reply
Looks good Dan, is it kral ish?? Umm. What kind of barrel are we talking about... Cold hammer forged?? Choked?? Anyways I hope it performs as good as it looks.. ATB jules..
Hey B.A!
It's certainly..Turkish..
I don't think she's cold hammer forged but I'm quite confident they're choked but we'll find out on the production model to see what's going on up the spout.
We'll soon find out matey! Thanks Jules!
Do you know what barrel it has, Dan?
At circa £600, this could be an absolute gem. 👍
Hi Rusty!
It's their own barrel to my knowledge, seeing how Turkish rifles have been shooting these days that's definitely not a bad thing at all.
@@bigdansairguns83 appreciate the reply. Thank you 🙏
This is great news for Airgunners.
New companies will drive innovation and quality as competition. Fingers crossed 🤞
Not a record though Hatsan Gladius comes with 4 mags Dan
Hi Gary!
Don't you find four of them to be overkill though? I find three a far more gentlemanly number.
😉😁
Wow! Do you know if they are bringing a .25 FAC verson and do you have any idea of price.
Hello mate.
Yes they are. I've just got off the phone to A-S-I and they will be getting FAC rifles. Pricing for the black you can see here will be circa £600 or £699 for the camo or walnut.
@@bigdansairguns83 Dan I really appreciate you getting back. I live in Northern Ireland, do you ship to a FAD here?
Keep up the great channel!
How much is it dan lad
Hey Sammy!
From what I can gather it should be around or maybe just under £600. Prices are still a bit TBA at the moment but when we get the production batch I'll do a quick review with all of the details.
Thanks Sammy and I'll keep you updated.
Any idea when it will be available yet Dan? I'd like the camo version in .177
500cc regulated for £600 sounds like a dream. When?
How much is the price dolar $?
Great gun but the magazines suck! I ended up sending it back after constant magazine jams, poor owner’s manual also.
how many joules
Bu tabancayı aldım ama hava kaçağı var ve tabancanın ucundaki ateşleme odası atış bitene kadar hava basıncı almıyor lütfen açıklayıcı videolar çekin lütfen tabancanın dipçiğini atış yapılan taraftan çıkarın Bu silahı satın aldığım ve düzgün çalışmadığı için iğneyi tamamen sökün veya tamamen sökün.
What is this video look like it was shot in early 2006
Kral mechanism
This is actually a "sort of" all new block from what I can tell. I'm seeing more Benjamin vibes than Kral especially the stepped rail.
General design pretty close to my aselkon MX8 Evok
What's the price ?????
Price on these monsters
Hi Christopher!
Around £600 judging from what I've heard so far but we can't be certain until they actually land. I'll let you know as soon as we have a concrete number.
Mmmmmm looks better from the left side , as opposed too the right hand side .. weird ..
Hi Mark.
We all have a good side... unless you're a Fiat Multipla.
It seems to be an interesting rifle for having a large air tank which adds a lot of autonomy, the design of the stock seems to be also attractive except in the area between the barrel and the regulator valve which is in my opinion very ugly in contrast to the rest of the rifle .
Hi Carlos!
I agree, although I'm not a fan of "tactical" rifles I do like the looks of this one barring the regulator section. It's a genuinely sweet looking rifle in the walnut and who knows they might even change that area up a bit with the production rifles.
Thanks Carlos! All feedback is good feedback and I'll pass it off to A-S-I.
It looks Turkish
Hi Matt.
Tastes and smells Turkish too.. I even went to bed last night with a beard and long hair and then woke up with an amazing shave and haircut.
She's Turkish alright!
Hi sir, this is Jill Blake from a gun gear brand. I am attracted by your performance in YTB and sincerely invite you to make a review video. If you are interested, please leave me your email. Then I will send you some products to see. Looking forward to your early reply.
Hi Jill!
Thanks for getting in touch and I'm glad you enjoy our videos.
We'd love to be able to review some of your products, if you'd like to get in touch you can Email us at bigdansairguns@outlook.com or get in touch with us at our website www.bigdansairguns.co.uk and visit out "contact us" section.
Thanks Jill and all the best.
Dan.