HEY, IF YOU ARE TRYING TO MAKE THIS, HERE ARE THE PARTS NECCESARY, I WROTE EM DOWN: IRFP 260 MOSFET 150 ohm resistor 100 ohm resistor 50 ohm resistor push button momentary switch transformer jumper wires AND IF U NEED HELP, CUZ HE DOES SPEAK SO FAST, JUST SLOW IT DOWN TO 0.5 SPEED AND TURN ON SUBTITLES
1:42 MOS-FETs aren't triggered by current and there is no current flowing between the Gate and the Source(leakage currents may occur, but they are neglect-able)... The Drain-Source-Voltage depends on the Gate-Source-Voltage. It's the main difference to Bipolar-transistors.
I recently have learned the basics of electronics and wiring and I feel like a whole new world of possibilities has opened up! Channels like yours are amazing and a great way to share knowledge through fun projects like this one. Thank you for putting your creativity out into the world You sir have earned my subscription today!
Hey, new subscriber here. I experimented with using the flash circuit of a disposable camera a long time ago and was able to get some reasonably high voltages, but could not find a use for it. It would be cool if you could find a use for hacked disposable camera flashes.
are you sure the formula at 3:30 is correct? I fond another one for transformators: U2=N2/N1*U1 (or as written there: V(s)= S(t)/P(t)*P(V)) And this one does make sense because if you calculate with units only you get V=V which is right but with your formula it is V=1/V or V=t^2/V depending on if you use t as Unit for turns
I am using the exact same transformer but with the irfz44n mosfet and a 100ohm 2W resistor but it doesn't seem to be working. Is there anything I'm doing wrong or could try to make it work? I already tried to swap the feedback coil and I tried 50ohm and 200ohm. I'm pretty sure I connected it in the right way.
IRFP260 "Transistor" "Current flowing in" the IRFP260 is a MOSFET, a metal-oxide semiconductor field effect transistor. You're partially correct in calling it a transistor but the working principle in MOSFETs is voltage, not current like BJTs
how is it different to the cheap 'taser' we made ? that one doesn't seem to light anything it just burns holes through, although I managed to light a dry leaf sort of.
If you power the transformer you bought from the side where the apark is created, will the current be increased and the voltage decreased? I am asking that because I have bought one like this!!😂😂
I have been looking for those transformers but just can't for the life of me find them! where did you get them? all the transformers I have are just huge...
My 10 yr old son just found this video and he wants to make the arc lighter. I found the switch and the resistor but need help with what transformer to use…do you have any links to the components you used?
is it possible to send information over your skin to another device you can build charge on the skin and you can use the capacitance of your body to manipulate magnetic signals like a theramin. but what I was thinking of is. lets say your phone has a metal plate on the back that puts a charge onto your skin and you with your other hand you touch another plate attached to a tv or a computer can you use your skin conductivity to transfer information like a wire from point a to point b like a photo or music or even a video because while I think its possible I also think it would be really static or grainy but I just wanna see a video of it I can garentee no one else has tried it.
but then why couldnt you just have the current flow to a step up transformer then have the higher voltage flow to the 2 conductive parts that make the arc
Micaiah Bardwell no, I managed to understand the one and a half minute. You did very well. Anyway, I have bought one transformer like Keystone's (makes 100,000V!), so I don't need to make one right now.😂😂
Nice!! The feedback coil isn't part of the primary, it doesn't actually help with generation of output, it's simply a driver coil, virtually no current is really through it. Very nice build though.
www.ebay.com/itm/1-Pc-10KV-High-Frequency-High-Voltage-Transformer-Booster-Coil-Inverter-New-/282215688077?_trksid=p2349526.m4383.l4275.c10 something like that, i think
Build a radio direction finder, maybe for Am or Fm, so you could track the transmiters you made. Planes use radio direction finders to home in on radio frequencies transmitted by the nearest airports to help them navigate.
Dude please help me ;__; I have a transformer that I have salvaged from a adapter .. it have 2-wires AC input and simply 2-wires output DC ... what should I do .... please help me .. I cri ;___;
man, correct me if im wrong, but mosFETs are FETs, which means no current goes through the gate, ergo, the gate resistor and the coil can/should be omitted
ohh, sorry, the feedback coil must be there, although there is no current, the coupling magnetic flux creates a voltage which toggles the mosfet. Still not sure why there is a resistor there, and what do you mean by gate current
oopps, sory, wrong again, there is actually a small current through the gate, responsible for chargen the built in capacitor, and im guessing the 150 ohm resistor is to control the RC timing
Once I had a guitar pickup that quit working because of a broken wire in the coil. I rewound it myself with wire I got from Radio Shack (remember them?) It was a LOT of work, but it worked great. It also convinced me that it really wasn't worth it. That's a lot of wire.
excellent presentation! folks should follow his twitter feed! Twitter is how I found this page, KSL liked a tweet and i've been around a since! so mote it be
This guy took the idea for the stun gun, he even used the same boost converter and didn't give credit. Here's the link: ruclips.net/video/XCAZY7pvPRQ/видео.html
Yeah I think I might just buy my own! I’m a biology and chemistry guy I could tell you how to synthesize some useful organic molecules but this I don’t understand haha
Great, now I can stun myself in the face while trying to light a cigarette. Reason enough to quit!
oOMonkeyMagicOo lol
That wont happen the frequency is so high it will stay on the outside of conductors
Lol
Please quit, you are loved.
Lol you dumb enough to do that
HEY, IF YOU ARE TRYING TO MAKE THIS, HERE ARE THE PARTS NECCESARY, I WROTE EM DOWN:
IRFP 260 MOSFET
150 ohm resistor
100 ohm resistor
50 ohm resistor
push button momentary switch
transformer
jumper wires
AND IF U NEED HELP, CUZ HE DOES SPEAK SO FAST, JUST SLOW IT DOWN TO 0.5 SPEED AND TURN ON SUBTITLES
any good link for a cheap transformer? :)
*_OK THANKS_*
Can u also tell the transformer type rating something
Where to find a cheap transformer
WHY ARE YOU SHOUTING?!
I thought I was smart once, then I watched one of your videos...
0:59
i think somethings wrong with your hammer ...
Benjamin Buljevic I
1:42 MOS-FETs aren't triggered by current and there is no current flowing between the Gate and the Source(leakage currents may occur, but they are neglect-able)... The Drain-Source-Voltage depends on the Gate-Source-Voltage. It's the main difference to Bipolar-transistors.
Can i use a bjt in place of mosfet
I think you have your formula for the transformer voltage wrong. It should be Vs = Vp*Ts/Tp
I recently have learned the basics of electronics and wiring and I feel like a whole new world of possibilities has opened up! Channels like yours are amazing and a great way to share knowledge through fun projects like this one. Thank you for putting your creativity out into the world You sir have earned my subscription today!
Looks like a superhero (or supervilain ?) in the making ;)
really cool!!! !!!!very good!you are the best!!I may try to make it in the future!
Hey, new subscriber here. I experimented with using the flash circuit of a disposable camera a long time ago and was able to get some reasonably high voltages, but could not find a use for it. It would be cool if you could find a use for hacked disposable camera flashes.
ffs why are you validating schools idea that cursive is usefull
Can you remake it but with readily available materials?
9:09; Nice paintings behaing you Keystone Science!!😂😂
7:05 "I have the 2 high voltage wires placed about that far apart" I believe the distance "that" is a metric unit. XD
I believe that they are 8 that's to a this.
Make an arc reactor next time.
Why not go all they way and build an iron suit with it
sigmation
gold and titanium*
Hristin Andonov it's called the Iron Suit (Since his name is Iron Man) and it's made of a nickel-titanium alloy known as nitinol with no gold in it
How different is the Arc lighter circuit from the Stun gun? (And what makes them different?)
Basically the same exact circuit just larger spark gap for the stun gun
Join the discord server guys!!!!
That's a pretty clever way to set up the transformer. Did you come up with that, or is that a common thing?
Do you have a link to the transformer
Just had a question, what’s stopping you from just inputting more current into the stun gun to produce a hotter arc?
are you sure the formula at 3:30 is correct?
I fond another one for transformators: U2=N2/N1*U1 (or as written there: V(s)= S(t)/P(t)*P(V))
And this one does make sense because if you calculate with units only you get V=V which is right but with your formula it is V=1/V or V=t^2/V depending on if you use t as Unit for turns
Is anyone going to mention the Tesla and Einstein drawings at the end?
What is the link for that transformer, i dont have any old items to take one out of
Thanks so much for all of your phenomenal videos! You've really helped with my Supervillainry! :)
Great content
wow!! I will try to do it
I am using the exact same transformer but with the irfz44n mosfet and a 100ohm 2W resistor but it doesn't seem to be working. Is there anything I'm doing wrong or could try to make it work? I already tried to swap the feedback coil and I tried 50ohm and 200ohm. I'm pretty sure I connected it in the right way.
150 ohms for starters
@@fmx_goodriddance4201 lol that was 4 years ago. I got it to work back then but I don't remember how anymore.
Keep up the great videos man.
IRFP260
"Transistor"
"Current flowing in"
the IRFP260 is a MOSFET, a metal-oxide semiconductor field effect transistor. You're partially correct in calling it a transistor but the working principle in MOSFETs is voltage, not current like BJTs
how is it different to the cheap 'taser' we made ? that one doesn't seem to light anything it just burns holes through, although I managed to light a dry leaf sort of.
Does it matter which Mosfet you use?
Peter_Hansen Nielsen not really
Can i use the boost converter to build arc lighter?
Wondering the same thing, especially since he doesn’t show specifically what kind of transformer he uses
do you have a link for the transformer??
Me to
me to plz
.
If you power the transformer you bought from the side where the apark is created, will the current be increased and the voltage decreased? I am asking that because I have bought one like this!!😂😂
Can you use a magnet/electromagnet to arc the electricity outward to light things more easily?
Where did you get the transformer
can i conect the taser and the light to the same nails?
6:47 when you see it, he insert the tactile switch into the bread board the wrong direction
Can we make arc cigarette lighter by stun gun module
I have been looking for those transformers but just can't for the life of me find them! where did you get them? all the transformers I have are just huge...
so let's be honest , when are you making a flux capacitor ;P
WHAT?! Flux capacitor? I think I should get back my plutonium quickly...
Just pull the one out from behind your car stereo ( under the horn)
why is my stun gun so much louder it is deafening
sent from backyardscientist. love the channel.. +1 sub
Why I look so intently at the on-paper set up with no knowledge of the stuff I have no idea.
Keystone science hacksmith Collenferz co-lab that would be the most beautiful thing ever
that would be a bit redundant actually maybe just the hacksmith and keystone science. i bet the to of you could make something really cool
My 10 yr old son just found this video and he wants to make the arc lighter. I found the switch and the resistor but need help with what transformer to use…do you have any links to the components you used?
is it possible to send information over your skin to another device you can build charge on the skin and you can use the capacitance of your body to manipulate magnetic signals like a theramin. but what I was thinking of is. lets say your phone has a metal plate on the back that puts a charge onto your skin and you with your other hand you touch another plate attached to a tv or a computer can you use your skin conductivity to transfer information like a wire from point a to point b like a photo or music or even a video because while I think its possible I also think it would be really static or grainy but I just wanna see a video of it I can garentee no one else has tried it.
1:36 MOSFETs are actually voltage operated, unlike bipolar transistors which are current operated.
They have nearly the same spark gap distance, why's this transformer better at making fires than the boost converter?
so the transformer is the crucial part here. must buy the correct one or it wont work.
but then why couldnt you just have the current flow to a step up transformer then have the higher voltage flow to the 2 conductive parts that make the arc
Look i tried but still can't keep up with you. Love the video.
Micaiah Bardwell me too. After the first minutes things got difficult!!😂😂
You made five? I only made two and a half.
Micaiah Bardwell no, I managed to understand the one and a half minute. You did very well. Anyway, I have bought one transformer like Keystone's (makes 100,000V!), so I don't need to make one right now.😂😂
Output voltage is directly proportional to input voltage and not inversely proportional. Your formula is not correct.
can you tell me abuot the transformaer used??????????
I LOVE how you explained the circuit so well and in depth that even somebody with as little knowledge as me could understand! ;-) Thanks!
genial
wouldn't the boost converter work the same
Nice!! The feedback coil isn't part of the primary, it doesn't actually help with generation of output, it's simply a driver coil, virtually no current is really through it. Very nice build though.
is it possible to make a stun gun that is not a stun gun. What I want is a stun gun that sounds and looks like one but is harmless.
do you have a shopping list/ Bill of materials?
Can this be made with an IRFP 240 MOSFET???
Anybody got a link for the little transformer?
what transformer did you use???? Please explain someone.
Saying "Be safe" with burns on your finger XD
Could some one inform me about the type of transformer
Jackson Osborne-coy I would like to know that as well
Jackson Osborne-coy bumblebee, transforms to yellow camaro
Jackson Osborne-coy inverter
Thanks
www.ebay.com/itm/1-Pc-10KV-High-Frequency-High-Voltage-Transformer-Booster-Coil-Inverter-New-/282215688077?_trksid=p2349526.m4383.l4275.c10 something like that, i think
Great, where can I get transformer or transformer design
Can I use a transformer out of a mobile charger.
He looks like the actor playing spider man in spider man homecoming
Will a IRLZ44N mosfet work?
Build a radio direction finder, maybe for Am or Fm, so you could track the transmiters you made.
Planes use radio direction finders to home in on radio frequencies transmitted by the nearest airports to help them navigate.
Dude please help me ;__;
I have a transformer that I have salvaged from a adapter .. it have 2-wires AC input and simply 2-wires output DC ... what should I do .... please help me .. I cri ;___;
The IRFP260 can be substituted by IRF3205PBF mosfet?
Ps: Plz I need answers & explainations, thank you.
Can build computers but still dis not have a hammer
cool
man, correct me if im wrong, but mosFETs are FETs, which means no current goes through the gate, ergo, the gate resistor and the coil can/should be omitted
ohh, sorry, the feedback coil must be there, although there is no current, the coupling magnetic flux creates a voltage which toggles the mosfet. Still not sure why there is a resistor there, and what do you mean by gate current
oopps, sory, wrong again, there is actually a small current through the gate, responsible for chargen the built in capacitor, and im guessing the 150 ohm resistor is to control the RC timing
Can u pls give link to purchase the transformer
The fastest talking YT'er. Are you sure you were not a car salesman in past lives? :)
Try watching "Today I found out".
Lol, there was one time I try to build your pocket taser and try to light a paper on fire with It and It didn't work xD, now I know why
Could you make music out of a taser?
use OBS for your stream friday :P
Once I had a guitar pickup that quit working because of a broken wire in the coil. I rewound it myself with wire I got from Radio Shack (remember them?) It was a LOT of work, but it worked great. It also convinced me that it really wasn't worth it. That's a lot of wire.
Your calculation for the Voltage in the secondary coil at 3:30 is wrong. Your units don't work out. Voltage does not equal inverse Voltage.
I have two transformers but neither have a feedback coil. Do I need to wind one or can I put the transformers in parallel?
excellent presentation! folks should follow his twitter feed! Twitter is how I found this page, KSL liked a tweet and i've been around a since! so mote it be
Can you make a video of simple Arc Gasifier, to vaporize home garbage and optionally turn it into the energy?
hey keystone, I'm a 3rd year Electrical engineering student. I'm looking for a good project for my college, can u suggest some ideas?
+ashish barick hmmm, what kind of projects are you looking for ?
Keystone Science, like, some small, simple yet different kind of project/experiment, like the one in this video, not too costly :/
are you married
You should try to make a "Caterpillar Drive" from "The hunt for Red October". (A pump made with magnets and running a current through sea water.)
Would an IRFZ44 work here?
How many turns are in the feedback coil and on the primary coil?
This guy took the idea for the stun gun, he even used the same boost converter and didn't give credit.
Here's the link: ruclips.net/video/XCAZY7pvPRQ/видео.html
Nova_Freak ohhh wait, my bad sorry, you said he copied me ... sorry... thanks for letting me know 😅
Keystone Science No problem.
OK so basically your transformer formula says if I increase the primary voltage the secondary voltage will be decreases ... What the fk
I have the same switch as u but i broke one of the 4 legs, will it still work?
Yes actually it's a 2 pin switch the pins are interconnected you can search on internet for its diagram if I am not late to reply😅
Nice work, it seems you mess up with the formula (values and formula seems both wrong), can you provide the secondary/primary ratio turns?
Yeah I think I might just buy my own! I’m a biology and chemistry guy I could tell you how to synthesize some useful organic molecules but this I don’t understand haha
Current cannot flow from the gate to the drain on a mosfet. Mosfets are controlled by the gate to drain voltage difference
Can you make vids on how to make tesla gun and atmospheric energy harvester?
Hey that's me in that Patreon list!!!
Love your stuff bro! Are you a friend of President Monson?
+- WretchedcoW - yes it is :) thank you so much!! And I wish I was! I do hold quite a bit of respect for him though, but I've never met him
Ha! I have a nose for my own kind ;)
Love your stuff but more than that--love that you are smart enough to laymen things out for us less educated!
Please can you share the link from which you bought the transformer, please.
If I ravage my old think pad can I find a transformer? If so, will it work?
Show me how put all the equipment in one