Very good for a concept. Install straight motors without gear boxes, programmable motor controllers, and a sealed throttle device. This thing could go much faster and with programmed ramps you could get much better performance. Maybe even tighten up the clearances between the props and the tubes to get greater thrust from them too. Great project and great results.
This same concept designed onto the hull of a canoe or kayak would really be badass, primarily for its ability to push through weeds and debris without tangling up the props . Amazing potential here.Nice.
Sweet, nicely done, thank you for demonstrating the assembly, and most importantly the actual use of it…. I love it! Dude you should just make a bunch of them and sell them as aerators (avoid the lawsuit crazy crowd), this would be good for an investor.
Maybe a Momentary switch you can hold down with your fingers wired to a relay would be better than a damn double pole throw ac breaker.. still pretty cool
Im going to go out on a limb here with a crazy guess that this guy has his doctorate in electrical or mechanical engineering or something. I mean, this is what he does for fun? I wish I had half the tools and skills he does. Wow. Impressive.
ага да. два таких винта стоят 4 тысячи аккум 6s 5А стоит 5-6к два мотора с редукторами выйдут 2к плюс два вала гребных и втулки пусть 1к и 1к на все эти трубы и провода. итого 12-15к за какую то хуету. проще лодочный мотор купить 3лс бушный и лодку и ходить 22км в час.
Man if you built those impellers like they built the jets on jet skis then you'd get ten times the power out of those props. All the water is cavitating around the blades . Makes me wanna build this for my kayak.
He probably built it before and was juat showing us how otherwise , no you wouldn't have 2 dc motor and shafts and propellars that match all of your perfectly matched pieces of pvc pipe as well as batteries and most other hardware. It worked great !
I know im asking the wrong place but does any of you know a trick to log back into an instagram account?? I stupidly lost my login password. I appreciate any tips you can offer me.
@Rey Cassius I really appreciate your reply. I got to the site on google and Im in the hacking process now. Takes quite some time so I will reply here later with my results.
One important thing.. One motor should have been wired backwards to create a counter rotating engine. This give stability and allows it to go straight without manipulation. Common practice on all multi engine setups weather a plane or vessel. But the idea is excellent for a kayak. Or something similar.
That's cool! If you placed a larger step up cone facing forward to be a scoop then a step down at the back to increase thrust you'd be surprised at the outcome. I must admit sir, you have a lot of odd components on hand. Do you have an ebay store or family owned hardware store? Very impressed. Please keep up the good work, you give me lots of ideas.
Beautifully executed and a wonderful scraps box you have. Love the welded pipe construction. It does occur to me that the butt-weld for the cowling tangs might be vulnerable. If you were to use two endcaps for the motor mount, back-to-back you could sandwich the rubber seal between them. You could then weld the tangs inside the second endcap. Lovely work.
If you lost your grip on it, it’s gone! Rather than the conventional tethered kill Switch though, you should utilize a momentary switch directly under your fingers or palm.
It's 7 o'clock in the morning, I'm watching this wonderful video , not even watched to the end yet (don't worry I will) cup of tea, thinking I'll get up in a minute, just another minute, and I know on the other side of the world, this bloke is up making another wonderful invention, and I feel an even more of a lazy bastard than I did before, ah well nother cuppa maybe, and then a little snooze, hold on finish the vid first zzzzzzzzzzzzxxx 👍
😀помню мы на речке как купались .я на тот берег + веревка намотанная на плаху доску по середине .те тащат . Плаху вниз и сразу на глубине омута уходишь .😀троем тащят так плавки слетали с меня + волосы заглаживались нештяк так . Вот так отдыхали мы . Давай удачи
@MANBEARPIG 7734 at the moment the propellors propulse the water partially into his body, making the shaft longer will have the propulsion outlet behind his body Less resistance in the path of the outlet means going faster
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
Very good for a concept. Install straight motors without gear boxes, programmable motor controllers, and a sealed throttle device. This thing could go much faster and with programmed ramps you could get much better performance. Maybe even tighten up the clearances between the props and the tubes to get greater thrust from them too. Great project and great results.
It would also help if most of the thrust wasn't going down his pants
And add a deadman switch on a tether so the thing doesn't get away from ya
He did a pretty damn good job using materials he found around the house, I'd give him on a scale of one to ten about a "12".
Great points thank you
comment it is always easier than doing it. all those stuff never works in the first attempt
40 years from Now..Man says to The media “my inspiration for getting us to Mars started when I was building PVC watercraft in my moms kitchen.
The amount of stuff this guy has is what blows my mind even more
That is China not India 😂😂😂😂
If ever I'm living near the sea shore,, I would definitely love to make that 😁
Nice idea, and the human mind can accomplish and accomplish.
This same concept designed onto the hull of a canoe or kayak would really be badass, primarily for its ability to push through weeds and debris without tangling up the props . Amazing potential here.Nice.
Those exist
That0Homeless0Guy what’s the product called ? I’d like to check it out, thanks 🙏
@@d_ward4871 Fucked if i know. Look up kayak motor or kayak jet motor. There's even peddle versions too.
My favourite channel creative channel I love this channel
Needs a tether. If your hands let go it could be a long swim.
Deadman switch.
Don’t worry, I built one it can’t get away from me, I put a tether on it and put it around my neck, lol😂
@@Stopcommunism Going down with the ship. Respect.
Lmao @@scottywills124
Didnt realize what meant by a sea scooter.till the end.outstanding.
Very nice Scooter... Congrats..
Sweet, nicely done, thank you for demonstrating the assembly, and most importantly the actual use of it…. I love it! Dude you should just make a bunch of them and sell them as aerators (avoid the lawsuit crazy crowd), this would be good for an investor.
Looks like a tether of some kind would prevent it from taking off across the lake and leaving the operator behind?
Amazing work!
Smart human. I love the creativity. I’m sure there will be more versions/refinements made. Don’t listen to the haters ✌🏼👍🏼
o9o
o
oooo
Loop
9o ok
โอ้สุดยอด...ทำให้เด็กๆเล่นคงจะสนุกมากๆ
Go Bigger 😏
Great work Kid. Nicely done.
Good designed PVC sea scooter , I am just worry about the motor shaft leaking
Did you put the red an black wire together on purpose?
Me to
Maybe a Momentary switch you can hold down with your fingers wired to a relay would be better than a damn double pole throw ac breaker.. still pretty cool
virgin proper electrical parts, chad "make everything out of romex and breakers"
He using Bosch tools so I don't think he can afford to buy the correct things
If only because if you let go.....your scooter is going to be very lonely on its trip.
Thanks to this, Cuba to U.S has never been easier.
🙉🙈🙊
good for a jets ski...brilliant man..well done...
haha I love the graceful docking at the end
Im going to go out on a limb here with a crazy guess that this guy has his doctorate in electrical or mechanical engineering or something. I mean, this is what he does for fun? I wish I had half the tools and skills he does. Wow. Impressive.
Most likely atleast one degree in Mechanical Engineering. Then an education in electronics.
I did not think that these switches are sealed. Great idea)
Как обычно из суперклея и палок получилось что-то стоящее)
ага да. два таких винта стоят 4 тысячи аккум 6s 5А стоит 5-6к два мотора с редукторами выйдут 2к плюс два вала гребных и втулки пусть 1к и 1к на все эти трубы и провода. итого 12-15к за какую то хуету. проще лодочный мотор купить 3лс бушный и лодку и ходить 22км в час.
I’m jealous, you have more quality junk than I have , enjoyed watching ! 😁
This kid did a great job and made something cool.
I just built one while watching this!
No u didnt
Wheres the video
Man if you built those impellers like they built the jets on jet skis then you'd get ten times the power out of those props. All the water is cavitating around the blades . Makes me wanna build this for my kayak.
Y’all ever notice how he this man has everything 😂
money
money and now he has all he needs cuz you cant go get some stuff like that
OMS_fights Bb except shoes
He probably built it before and was juat showing us how otherwise , no you wouldn't have 2 dc motor and shafts and propellars that match all of your perfectly matched pieces of pvc pipe as well as batteries and most other hardware.
It worked great !
A girl to shoot the videos...Omg
Land.
Water.
Now what?
Sky. 👍
call colin furze
Lol
That reminds me I gotta get my paraglider wing out to air it out.
Nah, next is space
This Scooter look so good, You are good designer,
That, Sir, is MARVELOUS!!! My brother is a plumber & we will make this!!!
Kudos to you. I love ingenuity. There are always ways to improve and many will suggest them, but you built it, they only talk about building one.
I know im asking the wrong place but does any of you know a trick to log back into an instagram account??
I stupidly lost my login password. I appreciate any tips you can offer me.
@Rory Emilio instablaster =)
@Rey Cassius I really appreciate your reply. I got to the site on google and Im in the hacking process now.
Takes quite some time so I will reply here later with my results.
@Rey Cassius It worked and I now got access to my account again. I'm so happy:D
Thanks so much you saved my account :D
@Rory Emilio Glad I could help xD
in florida I call it trolling for gators, really nice project
Injeanus
Those switches dont like water. Maybe a coupple of relays and a pair of reed switches and magnets would be able to make it completely waterproof?
Put rubber button boots on them. Thats simpler
Also should be momentary switching mechanism in case you let go.
I'm sure you could also seal them with something like silicone grease.
Thank you so much for sharing your knowledge .From Sri Lanka .
Nice... Super kreatif...
Пока делал, купил торцовочную пилу, а начинал с ножовкой )) 👍👍👍
это японец или китаец
И бормашинку))) лобзиком ручным видимо задолбался)))
One important thing.. One motor should have been wired backwards to create a counter rotating engine. This give stability and allows it to go straight without manipulation. Common practice on all multi engine setups weather a plane or vessel. But the idea is excellent for a kayak. Or something similar.
Right. Counter rotating and mirror image prop pitch.
That would be correct if it was not inside the tube. But they will not act that way
That's cool! If you placed a larger step up cone facing forward to be a scoop then a step down at the back to increase thrust you'd be surprised at the outcome.
I must admit sir, you have a lot of odd components on hand. Do you have an ebay store or family owned hardware store? Very impressed. Please keep up the good work, you give me lots of ideas.
This will be used in the coming 007 movies to help agent 007 to escape the hunt killers. Well done...
Great job.very talented
You turned yourself into a human fishing lure haha
ahahahahhaahhhaahaha
I've seen little firework boats that'd make him feel like a real submarine. 🤣
If that's a 'sea scooter', I now know I never want a sea scooter. Thanks for the informative video.
Im impressed it worked so well considering the size of the wheels
Thanks so much for the quick turnaround on your project ,nice job
Mantap,,, kreatif,,, 😇😇😇
Now we can make this❤️
Thank you bro🥰
Hiii thanks for making videos 😄😄😄👍👍👍 love you and your channel.keep it up.❤️❤️
Very good bro
Thanks
Beautifully executed and a wonderful scraps box you have. Love the welded pipe construction. It does occur to me that the butt-weld for the cowling tangs might be vulnerable. If you were to use two endcaps for the motor mount, back-to-back you could sandwich the rubber seal between them. You could then weld the tangs inside the second endcap. Lovely work.
And his boxes are sooó clean!
Still great video for understanding the basics.
The
This would get your kayak moving quite well
Just had the same thought. Thinking of a way to make outriggers that double as propultion and can use rod mounts....
That's exactly what I was thinking mounted on a kayak
Funny I came to this video looking for that same thing “a thruster for my kayak lol”
@@Youtubsucks5 .
How many horses power is this propulsion unit
It’s pretty fast. It came out good really creative good job.
Good job
Super creative alike the ingenuity that went into it. I saw something like this at CES2020. 🤩
Las Vegas?
Thank you @creativechannel now I can smuggle my cousins to the United States with a pvc water scooter true the Rio grande Valley
@Bo Hunter thats why its called smuggling lol
Consider of the Water Temprature bro.
Nice idea except the non waterproof switches!! And check out using magnetic couplings for the drive shafts.
Brilliant well done . Now build a plastic SUBMARINE LOL. thanks for sharing Ray K UK. YNWA.
Sounds really cool in the water too
Good success ! Give you some advice. You need a latch switch with a rope attached. When you miss, the motor will stop. The Scooter will not run away.
hy taik babi lek, comee
Dude you are a Genius
I was wondering what you would fasten that to I didn’t realize it was gonna be dragging you
feed pro
There's a video in your ads
Звук, как в Иван Васильевич меняет профессию, когда межвременной портал открывается))
Marat Galeev ору
Плагиат
Marat Galeev cdgc
German TÜV getting a stroke watching this ;-)
Nice work. If it´s working, it´s not dumb. Keep on building.
I like your style, Brocephus.
Another Incredible Build! Thank You for your Videos
Waaaaawwww
That's so amazing IDEA 🤜🤜🤜👉👉🤘🤘🤘
Who else was impressed with that impeller shaft runout
Nice work.
Thanks for sharing.
it could be a life saver! verygood
2 thumbs up back atcha lil' man.
Секретная китайская разработка"Посейдон":)
If you lost your grip on it, it’s gone! Rather than the conventional tethered kill Switch though, you should utilize a momentary switch directly under your fingers or palm.
Good idea.. strap it to your wrist for now
Well i assume its not for butterfingers.. shouldnt lose grip unless your a girlman
@@chuysalazar466 you're*
Nice job and cool idea...
It's 7 o'clock in the morning, I'm watching this wonderful video , not even watched to the end yet (don't worry I will) cup of tea, thinking I'll get up in a minute, just another minute, and I know on the other side of the world, this bloke is up making another wonderful invention, and I feel an even more of a lazy bastard than I did before, ah well nother cuppa maybe, and then a little snooze, hold on finish the vid first zzzzzzzzzzzzxxx 👍
Quite therapeutic watching this !!!
My only concern is the switches.....
Great idea though ❤️👍😇
Awesome builds! You are a braver man than I getting into that water! ;-)
Great job, sir. Congratulations on a fun and functional home build! 😊
Very clever Idea, good project.
That has the potential for so many leisure and military applications that its unreal
Deux mot: Ingénieux et astucieux! Bravo continuer...
In future creative channel be like:
Home made time machine with pvc pipe for small time intervals 😂😂😂😂😂
😁😁😁👍
using 775 motor
A dead man switch might be a good addition, in case it scapes your grip.
Also adhesive as the prop guard sounds like an accident waiting to happen. There should be some mechanical fastener to keep it in place.
waaaaah nice. love your work
😀помню мы на речке как купались .я на тот берег + веревка намотанная на плаху доску по середине .те тащат .
Плаху вниз и сразу на глубине омута уходишь .😀троем тащят так плавки слетали с меня + волосы заглаживались нештяк так .
Вот так отдыхали мы .
Давай удачи
THATS 🥇 🔥
Ps: if you were to extend the propellers more you wouldn’t disrupt the outlets and would go faster
@MANBEARPIG 7734 at the moment the propellors propulse the water partially into his body, making the shaft longer will have the propulsion outlet behind his body
Less resistance in the path of the outlet means going faster
Douwe Bakker cavitation... supply of water too little.
Congratulations dude you made it, good project and we obviously can say the results are just great
I’d like to see Colin furze remake this
Colin furze would make it powered by an actual jet engine, or rocket or something
Collin fur would use welding and tools I prolly dont have
Chuck Norris would build it and then beat up Colin Furze just for trying to make it better than him.😎👍
Colin fur would use a pulse jet above water 💧
Rickyrickrack chuck norris,never heard of her said Bruce Lee...
Love it. I'm going to attempt one for underwater diving. Just a few modifications👍😊
Did you manage to make one?
Great inventino and creation 👍u are Very good
Great ideal great build . Just need more info on parts for those that don't know
Good idea 👍👍
awesome video I like it a lot this I congratulate you are a genius Creative Channel !! 👏👏
Ad
Congratulations for 3 million subscribe 😀🙌🔥
thank you so much
😍😘
@@ChannelCreativeVN Funny :D It works
but switches are not waterproof.
Soo awesome! It would take me forever to swim that distance. Great job!
The sound of the pipes are satisfaction
Honestly this was pretty cool, a little more work and you could make this pretty flawless. Keep up the good work.
awesome!!!
What if a crocodile comes behind ur ass it looks like philippines submarine missile let it go let's see the bang bang
898u8u8
J
very nice guy I couldn't make one of these kk I really loved it congratulations on the dedication you have for this channel, a hug from Brazil ❤️❤️❤️
Парень.. такие выключатели в воде - это как минимум не правильно!!! Но за идею - лайк.
Тоже чё то смутило
Он с азии.Не понимать тебя
Awesome build
I wonder how many times he practiced this. Very impressive.
Am I the only one that enjoys sounds played at high speed?
Congratulation for 3 million🔥🔥🔥 subscribers🎉🎉🎉🎉🎁🎊🎉
Solo le hace falta un poco más de propulsión pero está genial , felicitaciones , excelente trabajo
That's awesome, love it!
Very nice, young man!