Finally! I have been looking for this router. But don't rule out the home enthusiasts and small businesses and only focus on ISP's, I was looking for a way to add 802.3af/at to my network but did not want to add ANOTHER device to my network. Now I just replace my RB260GSP and RB4011iGS+ with this and power all the small desktop switches, camera's and accesspoints throughout the house from this one device instead of separate power bricks, marking it more efficient, simpeler and power redundant. It's powerful enough to route and firewall my gigabit fiber connection as well as VPN and QoS without breaking a sweat. For a small business that uses all wireless laptops and a couple of AP's (seen more than once) you always need a extra 5-8 port PoE switch and a router just for a setup like that, that can be done with just this router. Or a slightly bigger network with just a couple of accesspoints and wired connections you can use this router to power the AP's and camera's and use a non-poe switch to get connectivity to the desktops.
@@deineroehre My wAP Audiences should be here tomorrow after being on backorder for a month. Wish I could say the same for some switches and a the RB5009 though. September. :(
@@Ayymoss Yeah, absolutely insane. My order of 9x CRS354-48P-4S+2Q+RM from September 2021 (!) was delivered last month. How am I supposed to do business if I can't sell anything? Even with me selling mostly my knowledge (most parts on stock, haven't outsourced my brain to china yet), the customers need hardware for their networks too and this delays some major projects. With no good explanation from Mikrotik because other vendors like Lancom or Aruba (or even homeuser-only products like AVM or Ubiquiti) are mostly on stock. This doesn't make it easy to stick with Mikrotik for network equipment, with the actual prices and deliverytime on parts I can even upsell to Lancom-based solutions with only minor discussions, at least for the businesscustomers. Have fun with your wAP Audience, if it does really arrive in the meantime...
Truly looks too good to be true. Considering the absolutely enormous supply chain issues with MikroTik POE devices over the last year though I am justifiably apprehensive. Hell, it has been near impossible to get our hands on a Netpower 16p. I want to try this so bad that it feels like it will be available sometime around 2030 lol.
I had the same experience. Ordered MikroTik AC AP, waited for a month. The store ended up cancelling the other. Went with TP-LINK Omada instead. For home use could have been enough to set up Honor or Huawei WiFi 6 router as an AP for under 40€ but I wanted to test out Omada since it was pitched as a Unifi alternative. I'm not disappointed :). Hopefully MikroTik will have WiFi 7 AP by the time I decide to change mine :)
Me too, We're looking at 6+ months for pretty much ANYTHING here in Australia. I do have a spare hAPac2 but wanted to buy another hEX PoE, no chance of getting one this side of 2023 I don't think.
I'm getting the RB5009UPr+S+IN which supports PoE out. I have one Ubiquity NanoG GPON which is my WAN (PPPoE). It supports Passive PoE-In - 24V Passive PoE (Pins 4, 5+; 7, 8-) and I also have a TP-Link Access Point that is also Passive PoE. Will I be able to power it using the PoE Out on the ports?
Looking at their release cadence, I think they could update RB5009 in August(in a few days or weeks). At least I am hoping they will release something with more 2.5G ports - 2 Gbps fiber costs 8 Euros/month here, it’s a shame to be limited by the router
Or anywhere for that matter. US side has been out of stock all year and now looking in most places wont have anything until spring 2023. They really should just produce a lot of these and get them out the door already
You could power it by 12V but I doubt you could provide PoE to anything. Most PoE transformers expect either 24 ot 48-57 and will get a little upset if they get less
I really wanted one of these then I saw the CCR 2004 PCIe and fell in love with that one and got it instead. I might still get one of these for a project I have coming up
You can't. The router only goes up to PoE+ (Type 2), which is ~25W in. Even Type 4 devices cap out at 70W in. If you want to power other devices, you need a dedicated PSU.
@@maslai1039 It is, but I imagine the circuitry for hybrid in/out ports is complicated enough as is for the price point, without having to carry potentially 3-4 times the load per port.
Does anyone know a reliable source in the USA to buy this product? Their website lists a few but they don't have a lot of the new products in stock generally for individual customers.
I still whant to get one that works and put it to the test. I already went thru some and they all stop working of had a problem. sent one over if you have a spare.
@@mikrotik where is it in stock exactly? I can't find it anywhere available and shops changing all the time date when it will arrive, always they say 2 months from when I ask..
Very good option but no stock. I have searched for this model and there is no stock. I have searched for RB260GSP and there is no stock. I have searched for RB260GS and there is no stock. I have searched for RB960PGS (hEX PoE) and there is no stock. I have searched Wireless Wire Cube Pro and there is no stock. Missing stock of many models.
@@mikrotik Yes. About the model of the presentation, I imagined it. But what about the rest? Please, is there any news about when we will have new stock of Mikrotik products?
What's the point of single 2.5Gb port? I think majority of users doing 2.5Gb networking use it to connect PC with NAS. Also it's awesome that all ports have PoE+. But with 420mA limit, even with 57V adapter (which you don't even sell, and this comes with 48V), it just barely won't be enough for Raspberry Pi 5 which needs 25W to power USB drives.
Can anybody mention a use-case for mounting 4 exactly same devices in the same 1U rackspace? I cannot get over it. A 16-port and a 24-port option with rackmount would make much more sense so I would not have to configure / update / maintain 4 devices...
@@steve87uk Come on. Think again. For lab use you can virtualize, use software solutions, simulate, etc. These are real products for production environments. You can use them in labs for sure, but why to design them for lab use? It does not make sense.
@@michaeljarcher 2 in 1U space would be much more logical for redundancy, but 4. Also I do not understand why they are not making the RB4011 in a similar rackmount form factor than the RB3011. That rackmount accessory for the RB4011 is the ugliest thing in the world.
Ideal for small home networks, POE on every port is really good. I wish there were a few more 2,5Gbit Ports and at least an additional SFP (for the DSL-Modem in SFP-Form factor, 10Gbit not needed...). And it would be great if there would be ANY mikrotik devices on stock. Not a single 802.3at/af POE-Switch is on stock (at least in germany and at the moment), no cAP, no hAP AC (with the practical POE-Port für DECT-Bases when fed with 48V) And Wifi 6e will get introduced by Mikrotik in 2030 or when?
To get a CD with the corresponding source code for the GPL-covered programs in this distribution, wire transfer $45 to MikroTikls SIA, Brivibas gatve 214i, Riga, LV-1039, Latvia. Please contact MikroTikls SIA for our current account information and wire transfer instructions. Offer valid for three years from the date of distribution of this software. This CD will only include the source code of the following programs and any non-proprietary programs distributed according to license requirements. This CD will not include MikroTikls proprietary SOFTWARE.
@@DominicMeyer do they really respect the spirit of the GPL and open-source software or do they mostly take what they want and keep as much of their own stuff as possible proprietary?
@@mikrotik a lot of devices support only A - you should consider to add this to main 24/48 poe switches it will help integrators to stay only with mikrotik
@@stanisawbiaas827 Just get rid of cheap devices which don't comply to standards - PD have to support A AND B, so there is no real issue with Mikrotik supporting B, all standard-POE devices will work with this.
@@mikrotikнет, в характеристиках на сайте компании НЕ так написано. Там сказано относительно режима B, что он актуален лишь для POE-IN ! Таки, а, как на самом-то деле в ситуации с POE-OUT ?
WHAT A BEAST!!!!!!!!!!! Please remove legacy USB (C please) and add WiFi6 and you will have the coolest networking gadget on earth....I really mean it.
Как долго его ждал и как жаль, что сейчас не купит его в РФ. Ждал подобный функционал (poe out на всех портах) на выходе "первого" rb5009 и взял его сразу как только появился в продаже. Очень доволен данной моделью, - не смотря на отсутствие wireless как у rb4011,- вывозит всё что угодно, для небольшого дома и малого/среднего бизнеса самое оно, а в некоторых местах, думаю, и в большом можно применять! С новой бетой РОСи появились контейнеры и с этим роутером это просто чудо. Надеюсь когда-нибудь смогу приобрести эту новую модель, а может уже более обновленную
Мощный роутер в совершенно непригодной упаковке, теперь ещё и с PoE. Назовите мне хоть один пример, когда нужен роутер способный гонять 10 Гб\с с 8 PoE выходами. Ну и вишенка: 77к рублей. Да, знаю, но меня как конечного пользователя IT не интересует вся это политическая возня.
You can use it with a few crs\css powered by PoE, so, you can place it more compact without big ugly DCs blocking access to neighbor sockets because of plug size.
Until proper documentation, or at least align the current one with these new devices, these are just fancy expensive bricks. On the other hand, is this the novelty? Are you bragging about POE in 2022?
What is not correct in the current documentation about these devices? And about PoE, if you don’t have a need for a powerful router with poe on its ports, it’s simply not a device for you
Я только НЕ понял, что компания пожадничала средств на такую малость, как полное оснащение платы твердотельными конденсаторами ? Какой смысл в установке только лишь одного твердотельного конденсатора, когда надёжность платы складывается из надёжности всех её компонентов ? Или разработчики компании НЕ изучали в ВУЗах теорию надёжности конструкций ? Вот, высохнет электролит через год-другой и всю такую замечательную плату останется отнести на помойку ? Зла на вас НЕ хватает ! 😠😠😠
Finally, great update, well, looks that you guys are listening. Looking forward now for the 2.5GB switches.
The perfect router for a MicroPOP. Great job Mikrotik !
Personally I'd love to see a version of this that has 10Gb SFP+, two 2.5GbE ports, and five GbE ports
I would also like to see at least 2 2.5G. 2 Gbps fiber is very cheap over here and I have a PC and Wifi 6E AP to feed that speed.
Finally! I have been looking for this router. But don't rule out the home enthusiasts and small businesses and only focus on ISP's, I was looking for a way to add 802.3af/at to my network but did not want to add ANOTHER device to my network. Now I just replace my RB260GSP and RB4011iGS+ with this and power all the small desktop switches, camera's and accesspoints throughout the house from this one device instead of separate power bricks, marking it more efficient, simpeler and power redundant.
It's powerful enough to route and firewall my gigabit fiber connection as well as VPN and QoS without breaking a sweat.
For a small business that uses all wireless laptops and a couple of AP's (seen more than once) you always need a extra 5-8 port PoE switch and a router just for a setup like that, that can be done with just this router. Or a slightly bigger network with just a couple of accesspoints and wired connections you can use this router to power the AP's and camera's and use a non-poe switch to get connectivity to the desktops.
Everything is fine. BUT there is shortage for classic 5009 in LT for several months already.
Please do an SFP+ switch in this form factor next. 😋
I know that you will tuck your router in the rack most of the time, but dang! It looks beautiful.
So when it's out in the wild, it still looks nice.
I would love to see this with dual SPF+ cages.
perfect device for my needs, can't wait to get one
POE OUT!!! Finally, thank you so much.
Awesome product. It would be nice if I could buy it. :D
I have it on order with 3 UK retailers, and they're estimated in September and October.
yeah, none of the 4series or 5series are avilable anywhere. WTF?
@@gkos12 POE-Switches and hAP AC or cAP are out of stock either, I can't get any devices at the moment.
@@deineroehre My wAP Audiences should be here tomorrow after being on backorder for a month. Wish I could say the same for some switches and a the RB5009 though. September. :(
@@Ayymoss Yeah, absolutely insane.
My order of 9x CRS354-48P-4S+2Q+RM from September 2021 (!) was delivered last month. How am I supposed to do business if I can't sell anything?
Even with me selling mostly my knowledge (most parts on stock, haven't outsourced my brain to china yet), the customers need hardware for their networks too and this delays some major projects. With no good explanation from Mikrotik because other vendors like Lancom or Aruba (or even homeuser-only products like AVM or Ubiquiti) are mostly on stock.
This doesn't make it easy to stick with Mikrotik for network equipment, with the actual prices and deliverytime on parts I can even upsell to Lancom-based solutions with only minor discussions, at least for the businesscustomers.
Have fun with your wAP Audience, if it does really arrive in the meantime...
I've been waiting for hEX PoE upgrade and this is just it!
Can this push 2gbit PPPoE internet through with firewall and IPv6?
I dont get it.... Each port can support 25W, in screenshot you are showing 915mA, but in specs the maximum is 640mA. What are the correct numbers?
Where we will see more CRS500 series models? To replace the CRS328-24P or the CRS326?
Truly looks too good to be true. Considering the absolutely enormous supply chain issues with MikroTik POE devices over the last year though I am justifiably apprehensive. Hell, it has been near impossible to get our hands on a Netpower 16p. I want to try this so bad that it feels like it will be available sometime around 2030 lol.
I had the same experience. Ordered MikroTik AC AP, waited for a month. The store ended up cancelling the other. Went with TP-LINK Omada instead. For home use could have been enough to set up Honor or Huawei WiFi 6 router as an AP for under 40€ but I wanted to test out Omada since it was pitched as a Unifi alternative. I'm not disappointed :).
Hopefully MikroTik will have WiFi 7 AP by the time I decide to change mine :)
Me too, We're looking at 6+ months for pretty much ANYTHING here in Australia. I do have a spare hAPac2 but wanted to buy another hEX PoE, no chance of getting one this side of 2023 I don't think.
I'm getting the RB5009UPr+S+IN which supports PoE out.
I have one Ubiquity NanoG GPON which is my WAN (PPPoE). It supports Passive PoE-In - 24V Passive PoE (Pins 4, 5+; 7, 8-) and I also have a TP-Link Access Point that is also Passive PoE.
Will I be able to power it using the PoE Out on the ports?
Looking at their release cadence, I think they could update RB5009 in August(in a few days or weeks). At least I am hoping they will release something with more 2.5G ports - 2 Gbps fiber costs 8 Euros/month here, it’s a shame to be limited by the router
sorry guys, if i'm not up to date -is there any wifi6 device i can purchase, like now now?
what is the Throughput for this RB5009 ?
Would be great if there was any Mikrotik stock available anywhere in Australia
Or anywhere for that matter. US side has been out of stock all year and now looking in most places wont have anything until spring 2023. They really should just produce a lot of these and get them out the door already
Confused. You say 24-57vdc but the DC jack very clearly says 12-57
You could power it by 12V but I doubt you could provide PoE to anything. Most PoE transformers expect either 24 ot 48-57 and will get a little upset if they get less
PoE redundant Power switches please.
I really wanted one of these then I saw the CCR 2004 PCIe and fell in love with that one and got it instead. I might still get one of these for a project I have coming up
Can it run on -48vdc input? Isolated?
What POE adaptor do you recommend for this RB5009UPr+S+IN? It seems that MikroTik does not sell any POE adaptor, especially for a power ouput of 150W.
You can't. The router only goes up to PoE+ (Type 2), which is ~25W in. Even Type 4 devices cap out at 70W in. If you want to power other devices, you need a dedicated PSU.
@@watchm4ker It's a pity MikroTik has not given the 802.3bt POE-IN to RB5009UPr
@@maslai1039 It is, but I imagine the circuitry for hybrid in/out ports is complicated enough as is for the price point, without having to carry potentially 3-4 times the load per port.
More 2.5gig ports would be great.
They don't even have to make them all 2.5G, just half of them would be useful with the current Fiber speeds.
When it will be available to buy?
Do you guys have a switch with multiple (say, 8) 2.5GB ports? I couldn't care less about POE.
Does "RouterOS V7 only" mean that it will not support next major versions of RouterOS?
No 😄
Thanks for the information @@mikrotik
The updated POE features are great, by the way can you also set forth a metal upper case cover for replacement of the plastic upper case cover?
The metal case on this and RB4011 acts as a heatsink.
the same feeling when I just ordered a switch due to the lack of PoE out in 5009 ..... Damn....
What WiFi solution do you recommend with RB5009UPr+S+IN?
RB5009 + hAP AX2 is a powerful combo. Or cAP AX if you need many AP devices covering your location.
@@mikrotik I intend to use just for home use with 2x cAP AX as a personal lab.
This model support metarouter ?
kk. But with ROS7 Not ready for production can these run stable on ros6 ?
No. ... But ros7 is relative ok
Stable v7 out for many months now
I suspect the RouterOS 7 branch for the newer 5th Gen series hardware is infinitely more stable than the older 4th gen and earlier.
Does anyone know a reliable source in the USA to buy this product? Their website lists a few but they don't have a lot of the new products in stock generally for individual customers.
This specific product was released a day ago, distributors are only now placing orders for it. Contact some of the bigger ones and ask for lead time
I still whant to get one that works and put it to the test. I already went thru some and they all stop working of had a problem. sent one over if you have a spare.
More sfp+ please
Could we get one with at least half of the ports at 2.5G, please?
How much are you willing to pay? 😀
@@mikrotik Just about as much or slightly more. You can work your magic to offer it for a reasonable price
@@mikrotik I am crossing my fingers that you have an update for RB5009 this summer.
is it me or its been a year since release and there is like 2 and a half customer reviews on utube?
We don't pay for reviews, maybe that is why :)
I can't buy it in anywhere... where is it available in EU?
You can buy it from our distributors: mt.lv/buy it’s still in stock in a few places but it’s very popular and sells out fast
@@mikrotik where is it in stock exactly? I can't find it anywhere available and shops changing all the time date when it will arrive, always they say 2 months from when I ask..
Where to buy? ...
This is an epic release. Does it support hardware offloading on bridge ports with VLAN filtering?
It does yes. Same as for the original RB5009. I have one.
В чем отличие от этой модели RB5009UG+S+IN?? В этой я так понимаю его нет.
PoE out на всех портах?
Все или ещё что-то?
I want this same unit for PoE++ and 2.5Gbps PoE or more.
Cant find the website for performance metrics?
Shhhhhh this is a pre-announcement. Don't tell anyone you saw it. Or do
It's an RB5009, the specs are on the mikrotik website - just look for the specs for the original version.
just one 2.5 port? is this video 4 years old??!
Very good option but no stock.
I have searched for this model and there is no stock.
I have searched for RB260GSP and there is no stock.
I have searched for RB260GS and there is no stock.
I have searched for RB960PGS (hEX PoE) and there is no stock.
I have searched Wireless Wire Cube Pro and there is no stock.
Missing stock of many models.
It’s not released yet, of course no stock
@@mikrotik Yes. About the model of the presentation, I imagined it.
But what about the rest?
Please, is there any news about when we will have new stock of Mikrotik products?
В каких странах 5009 есть в наличии? К сожалению в РФ есть только у перекупов за бешбабло :(
Would trade 4 of the PoE ports for all 8 ports to be 2.5Gb
We don't really need all to be 2.5G, half of them would be great as well.
What's the point of single 2.5Gb port? I think majority of users doing 2.5Gb networking use it to connect PC with NAS.
Also it's awesome that all ports have PoE+. But with 420mA limit, even with 57V adapter (which you don't even sell, and this comes with 48V), it just barely won't be enough for Raspberry Pi 5 which needs 25W to power USB drives.
You can use this port for that then
Can anybody mention a use-case for mounting 4 exactly same devices in the same 1U rackspace? I cannot get over it. A 16-port and a 24-port option with rackmount would make much more sense so I would not have to configure / update / maintain 4 devices...
Lab use.
Redundant systems, what if single router fails, can fall back to other device. And not a home use-case probably.
@@steve87uk Come on. Think again. For lab use you can virtualize, use software solutions, simulate, etc. These are real products for production environments. You can use them in labs for sure, but why to design them for lab use? It does not make sense.
@@michaeljarcher 2 in 1U space would be much more logical for redundancy, but 4. Also I do not understand why they are not making the RB4011 in a similar rackmount form factor than the RB3011. That rackmount accessory for the RB4011 is the ugliest thing in the world.
@@romanvarga I didn't say it was the only use.. Use your imagination!
Ideal for small home networks, POE on every port is really good.
I wish there were a few more 2,5Gbit Ports and at least an additional SFP (for the DSL-Modem in SFP-Form factor, 10Gbit not needed...).
And it would be great if there would be ANY mikrotik devices on stock. Not a single 802.3at/af POE-Switch is on stock (at least in germany and at the moment), no cAP, no hAP AC (with the practical POE-Port für DECT-Bases when fed with 48V)
And Wifi 6e will get introduced by Mikrotik in 2030 or when?
Dawg I just put in my order for the OG 5009 like a week ago :(
How to order
mikrotik.com/buy
Why not console port??
Mikrotik Woobm
when u release MikroTik OLT
We don't plan to make an OLT
@@mikrotik why ?
That's the need of present market
That is not in the scope of our product lines. We make routers and switches.
since this product uses RouterOS which is based on GPL-licensed Linux, where can I get the complete source code ?
RouterOS is Mikrotik's product so you'll not get the source code
To get a CD with the corresponding source code for the GPL-covered programs in this distribution, wire transfer $45 to MikroTikls SIA, Brivibas gatve 214i, Riga, LV-1039, Latvia. Please contact MikroTikls SIA for our current account information and wire transfer instructions. Offer valid for three years from the date of distribution of this software. This CD will only include the source code of the following programs and any non-proprietary programs distributed according to license requirements. This CD will not include MikroTikls proprietary SOFTWARE.
You can get the source code if you ask support@mikrotik.com
@@DominicMeyer do they really respect the spirit of the GPL and open-source software or do they mostly take what they want and keep as much of their own stuff as possible proprietary?
@@mikrotik i've asked, no answer yet
You guys are crazy amazing!!!
So are you! ;)
PoE version, finally! :-)
Sadly Mikrotik do not support PoE Mode A
No, ether1 supports A/B, but ether2-8 B-only
@@mikrotik a lot of devices support only A - you should consider to add this to main 24/48 poe switches it will help integrators to stay only with mikrotik
@@stanisawbiaas827 Just get rid of cheap devices which don't comply to standards - PD have to support A AND B, so there is no real issue with Mikrotik supporting B, all standard-POE devices will work with this.
@@mikrotikнет, в характеристиках на сайте компании НЕ так написано. Там сказано относительно режима B, что он актуален лишь для POE-IN !
Таки, а, как на самом-то деле в ситуации с POE-OUT ?
WHAT A BEAST!!!!!!!!!!! Please remove legacy USB (C please) and add WiFi6 and you will have the coolest networking gadget on earth....I really mean it.
Как долго его ждал и как жаль, что сейчас не купит его в РФ. Ждал подобный функционал (poe out на всех портах) на выходе "первого" rb5009 и взял его сразу как только появился в продаже. Очень доволен данной моделью, - не смотря на отсутствие wireless как у rb4011,- вывозит всё что угодно, для небольшого дома и малого/среднего бизнеса самое оно, а в некоторых местах, думаю, и в большом можно применять!
С новой бетой РОСи появились контейнеры и с этим роутером это просто чудо.
Надеюсь когда-нибудь смогу приобрести эту новую модель, а может уже более обновленную
I hope too.
Great router but there is no stock in Spain, we can't buy it...
Perfect router for home use
Now to setup pi-hole & nginx reverse proxy in a container :P
Awesome products.
the future would be at least all ports 2.5gbit or better equal to 10gbe. Everything else is no longer contemporary
Unfortunatly, a non existing product. Not available anywhere...
This product is not released yet. We only uploaded the video today. So yes, it is very new and not available yet.
@@mikrotik Thank you. Can we subscribe somewhere for a release date and info?
"Any ISP Routers"
Wait.. I'm looking at ISP routers and thinking about it for home lolol?!?
Why not? They are affordable for home, and powerful for and isp. Great for everything
A great product you can't buy......
Wow. Nice. 👍
Мощный роутер в совершенно непригодной упаковке, теперь ещё и с PoE. Назовите мне хоть один пример, когда нужен роутер способный гонять 10 Гб\с с 8 PoE выходами.
Ну и вишенка: 77к рублей. Да, знаю, но меня как конечного пользователя IT не интересует вся это политическая возня.
You can use it with a few crs\css powered by PoE, so, you can place it more compact without big ugly DCs blocking access to neighbor sockets because of plug size.
With that music and those router features this video is NSFW.
Until proper documentation, or at least align the current one with these new devices, these are just fancy expensive bricks. On the other hand, is this the novelty? Are you bragging about POE in 2022?
What is not correct in the current documentation about these devices? And about PoE, if you don’t have a need for a powerful router with poe on its ports, it’s simply not a device for you
@@mikrotik Check this "I purchased a RB5009 a couple of weeks ago and the current documentation does not align with what is available in RouterOS."
Excelente produto
Я только НЕ понял, что компания пожадничала средств на такую малость, как полное оснащение платы твердотельными конденсаторами ?
Какой смысл в установке только лишь одного твердотельного конденсатора, когда надёжность платы складывается из надёжности всех её компонентов ?
Или разработчики компании НЕ изучали в ВУЗах теорию надёжности конструкций ?
Вот, высохнет электролит через год-другой и всю такую замечательную плату останется отнести на помойку ?
Зла на вас НЕ хватает ! 😠😠😠
✨✨✨
you need an external microphone - sound on video is awful
Sounds awesome for us. He is using an external microphone already. Try on some other device, maybe something wrong on your pc
I want to have a baby with that 5009
Ахуянаа!!! Вот только где купить?
Mikrotik user interface looks like a design from 90s no offense
Which user interface? I hope you are using the smartphone app
just grab a netonix lol
Побрейся! Странно смотришься.