Philips TV, 49PUS7909 model. After 2 weeks of work no longer included, reboot loops. TV can not get started. Perfect quality from branded manufacturer.
Проработав 2 недели, перестал включаться. Т.е. при включении в розетку не проходит начальную стадию загрузки, зацикливается в ребут. Скачков напряжения не было, изменений по подключенным интерфейсам за эти 2 недели тоже не было. Сборка российская, раньше хотя бы от 42 дюймов шла венгерская. Досадный прецедент, учитывая, что безоговорочно отдавал предпочтение телекам фирмы Philips, и это 4-й телек фирмы в личном опыте.
Решение найдено, господа!) Выключаем из разетки, потом держим джостик на телевизоре вниз и не отпуская джостика втыкаем в разетку, ждем.... ждем... и запускается что-то похожее на BIOS. А там выбираем сброс (предпоследняя строчка), потом строчку со словом"yes", ждем окончания сброса и через это же меню перезагружаем, радуемся)
I had the same problem with Phillips android tv. The technician said the main board faulty. it's only been 1 year. cost 160 dollars. won't buy Phillips product again.
у меня тоже Филипс 47pfs7309/60 сломался даже года не прошло . проблема почти аналогичная : завис на одном из каналов и не переключается . звонил на горячую линию Филипс попросили специальную прошивка установить но увы не помогло . завтра повезу на ремонт .
I had almost the same problem - not so intense though, it just restarted sometimes every 15-20 minutes - with a 47pfh6309/88. Yesterday after having tried almost everything I could think (disconnecting every device, factory resetting, flashing with older firmware, etc.) I tried disabling ambilight. Till now, it seems like restarts have stopped. Try this before you contact a repair center. edit: Eventually ambilight was not the problem. It kept rebooting even with ambilight set to off after some hours. Problem solved when I disabled wifi and connected the TV through an ethernet cable. I don't know why exactly but as some other reports that I've found connection to some AP's can cause similar problem.
I have almost the same problem (while I’m watching on streaming apps the TV suddenly restarts itself) and I found on Google that : “An app that uses a lot of memory of the TV for buffering (video streaming apps) can cause the TV to reboot or freeze. Ensure a steady, high quality network connection for the use of these apps.” And I didn’t want to change the internet provider to fix the issue, but now tomorrow I will install the internet cable and I will come with the update. Cheers in advance. :)
I think this is the problem with all of them philips. Mine too, if i dont have the wi fi connected the tv works fine. So long i connect the wi fi it seems after some while its restarts itself.
Aynı arıza bende de var garanti varken açılıp kapanmama yapıyordu arasira şimdi bunun aynı oldu yani 2 yıl garanti çok az ayriyeten bu bence kronik bir arıza
Кажется мне, что у Вам просто неудачный аппарат попался. Мой работает без ошибок,тьфу-тьфу. Была в начале проблемка с Хромом - он просто не открывался, но проблема быстро решилась - После ночного простоя без питания, при следующем включении ТВ нашел обновления, установил их и после этого все стало на свои места. Наличие полноценного браузера - очень полезная штука! Отмечу следующее: 1) Быстрый, на практике тормозов не заметил, только при загрузке 2) Андроидовские игрухи не тормозят 3) Можно переместить приложения на внешний диск 4) При некоторых манипуляциях можно разблокировать "unknown sources" и устанавливать любые приложения, правда качать их не из маркета 5) xbmc стал и запустился
Да, возможно. Потому что после замены по гарантии на аналогичный, он работает без нареканий с конца января. В целом девайс неплохой, со своими минусами, но и не без достоинств. Из недостатков хотелось бы отметить: 1. Плавность (digital narutal motion) не работает в режиме 3D 2. Нет настроек глубины 2D-3D 3. Малый угол обзора 3D, чуть ниже или выше середины - полэкрана двоится 4. Опция ClearLCD, повышающая отклик матрицы, всегда неактивна 5. ТВ в 90% случаев не может открыть все файлы "каталог медиаресурсов" через DLNA по проводной сети 6. Аналогично не всегда открывается список всех файлов с USB 7. Вся андроидная часть работает в FullHD а не в 4k, т.е. все программы нечёткие, включая галереи изображений, браузер и прочее 8. Не играются 4k файлы (но это мелким шрифтом указано в документации) 9. Очень некачественный алгоритм уменьшения фотографий до 4k (nearest neighbor), фотки с зеркалки портит 10. В режиме слайдшоу по красной кнопке все фотографии сжимаются до FullHD а не 4k 11. Иногда вертикальные фотографии непропорционально растягиваются на весь экран 12. При просмотре фотографий с середины списка невозможно пролистать предыдущие фотографии, выкидывает в список файлов 13. Не передаётся 5.1 звук по HDMI Arc при DLNA/USB просмотре, несмотря на включенную настройку "выводить звук в многоканале" 14. Не всегда срабатывает HDMI Arc, приходится перезагружать ресивер и ТВ 15. Нет детектирования чёрных полей в ТВ режиме (автоформат) и алгоритма нелинейного растяжения 4:3->16:9, которое было во всех тв за последние 8 лет, в том числе и в моих 2-х предыдущих Philips 16. По DLNA/USB нет информации о видеофайле (о разрешении видео, о звуке, каналах) 18. Матрица 60Hz, на более дорогих моделях 4k матрица 120Hz
Слушайте! Прошу прощения. А откуда у Вас информация по поводу матрицы с частотой 60Hz? Или это личным ощущениям? Тут же вроде как самсунговская VA-120hz, модель то серии 7-й. По идее должно быть 100 герц.
Bende de aynı sorun var. Yorumları okuduktan sonra sol arkadaki açma kapama düğmesinin kapağını söküp aşağı doğru sonra yukarı doğru basılı tuttum. Sonra birden açıldı. Siz de deneyin isterseniz
Yes! When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside. When you look at the backside, you will find 3 massive thermalpads. Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board. Dry the board with a hairdryer after you remove the moist on it and assemble the tv and remember the ambilight :) Let me know how it works.
Np! :) My own screen died though, it worked for allmost a year but finally went coocoo, so i purchased another. Still an easy way of using the screen while saving up to another.
Donanım haber de ‘’Philips 55PUS7909 Açılma Sorunu’’ şeklinde bir konu açtım. Bu sorunu yazılımı yenileyerek çözdüm. Mesaj atarsanız yardımcı olmaya çalışırım.
Kardeş donanımhberdeki başlığını okudum aşağı tuşa basarak girdiğin ekrana ben giremiyorum işte başka sitelerde de önerilmişti bu. Bi kere tv şans eseri açıldı sonra gene kapandı yine aynı şey 5 dk sonra. Senin şu tamirci arkadaşına ben de bi götürmek isterim hem o da ekmek kazansın. Adresi verirsen... Teşekkürler. Bu arada istanbuldayım.
CityBorispol Зависания бывают, глюки тоже, все же Андроид старый со всеми вытекающими. Для 3д не лучший вариант, глубина небольшая и задние планы двоятся. В сравнении с Самсунгом на кухне, который дешевле в 2 раза и с активным 3д. Там картинка действительно объёмная, с хорошей глубиной и большими углами просмотра. Более подробно о недостатках ниже в комментах.
Yes! When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside. When you look at the backside, you will find 3 massive thermalpads. Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board. Dry the board with a hairdryer after you remove the moist on it and assemble the tv and remember the ambilight :) Let me know how it works.
as mentioned to others commenting on this: "Yes! When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside. When you look at the backside, you will find 3 massive thermalpads. Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board. Dry the board with a hairdryer after you remove the moist on it and assemble the tv and remember the ambilight :) Let me know how it works."
Toplasan 1000 saat anca çalışmıştır sanırım .. ilk önceleri Kendi kendine kapanıp açılıyor du. Sonra ses çıkmadı son olarak bu. Garanti de bitti 4 ay önce . Bundan sonra bin TL verip ucuz bişey alacağım
@@suleymanylmaz1413 yazık günah yazılım donanımı bozuyor yine aynı olacak.panelini sat kaç para veriyorsa servis git yeni tv al 2 bin liraya sıfır tvler var.ben bozulunca bi daha phlips almam ucuz bişey alırım
When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside. When you look at the backside, you will find 3 massive thermalpads. Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board. Dry the board with a hairdryer after you remove the moist on it and assemble the tv. dont forget the ambilight :) Let me know how it works.
Hey Freddy, I'm having the same issue with my TV. Would you be able to make a tutorial on the above? or take payment for walking this through step by step on a video call? Many thanks - Harrison
To make a tutorial would require, taking apart my tv once more, risking to drop it or something else, its kinda heavy as you might know :) But sure, i can try walk you through it. what kinda messenger do you have?
Как не печально, но Philips продал свое направление по телекам китайской TPV в 2013 году. Аудио и видео - японскому Фунай. Т.е. у Philips только медицинское оборудование и свет. У вышеобозначенных полные права от разработки до производства, шильдик Philips по франшизе. Хотя телек не плох, функционал Андроида и шикарная палитра Philips как и раньше. Но профанаций и развода маркетологов тоже немало, в том числе 4к и функционал Андроида именно для этого девайса.
koshff2 но, не могу сказать, что картинка гавно. Она все так же превосходна, все те же естественные цвета, эмбилайт и отсутствие засветки. На мой взгляд надо подождать пару лет, 2-3 поколения и они догонят конкурентов по функциональности и юзабилити ПО.
What was the result?
Проработав 2 недели, перестал включаться. Т.е. при включении в розетку не проходит начальную стадию загрузки, зацикливается в ребут. Скачков напряжения не было, изменений по подключенным интерфейсам за эти 2 недели тоже не было. Сборка российская, раньше хотя бы от 42 дюймов шла венгерская.
Досадный прецедент, учитывая, что безоговорочно отдавал предпочтение телекам фирмы Philips, и это 4-й телек фирмы в личном опыте.
Решение найдено, господа!) Выключаем из разетки, потом держим джостик на телевизоре вниз и не отпуская джостика втыкаем в разетку, ждем.... ждем... и запускается что-то похожее на BIOS. А там выбираем сброс (предпоследняя строчка), потом строчку со словом"yes", ждем окончания сброса и через это же меню перезагружаем, радуемся)
Works like a charm. A lots of love dear. You revived my TV that was dead for the last two years.
Bundle of thanks.
Итак, сколько времени занимает этот процесс?
Он был на экране удаления около 20 минут.
Hallo zusammen habe denn gleichen Fehler was soll ich jetzt am besten machen ? Würde mich freuen wenn sie mir antworten danke
@@RahmanDermaku97i dont know have you a solution?
Всё сделал как вы написали, появилось меню, но джойстик в меню не переключает. Попробовал пультом, с пульта получилось, но увы, всё тоже самое
i have exacly same type but mine doesn't start...
I had the same problem with Phillips android tv. The technician said the main board faulty. it's only been 1 year. cost 160 dollars. won't buy Phillips product again.
Thank you for comment even though it's a old comment but helpful I literally never had this problem with my other brands of TV's
у меня тоже Филипс 47pfs7309/60 сломался даже года не прошло . проблема почти аналогичная : завис на одном из каналов и не переключается . звонил на горячую линию Филипс попросили специальную прошивка установить но увы не помогло . завтра повезу на ремонт .
I had almost the same problem - not so intense though, it just restarted sometimes every 15-20 minutes - with a 47pfh6309/88. Yesterday after having tried almost everything I could think (disconnecting every device, factory resetting, flashing with older firmware, etc.) I tried disabling ambilight. Till now, it seems like restarts have stopped. Try this before you contact a repair center.
edit: Eventually ambilight was not the problem. It kept rebooting even with ambilight set to off after some hours. Problem solved when I disabled wifi and connected the TV through an ethernet cable. I don't know why exactly but as some other reports that I've found connection to some AP's can cause similar problem.
I have almost the same problem (while I’m watching on streaming apps the TV suddenly restarts itself) and I found on Google that : “An app that uses a lot of memory of the TV for buffering (video streaming apps) can cause the TV to reboot or freeze. Ensure a steady, high quality network connection for the use of these apps.” And I didn’t want to change the internet provider to fix the issue, but now tomorrow I will install the internet cable and I will come with the update. Cheers in advance. :)
I think this is the problem with all of them philips. Mine too, if i dont have the wi fi connected the tv works fine. So long i connect the wi fi it seems after some while its restarts itself.
I have the same problem. Did you find the solution?.
Решение есть
@@user-vz8hs1ps4f did you find?
try removing small wifi board from main board if this works for you change or repair you wifi board
Cómo quitar una placa WiFi
Aynı arıza bende de var garanti varken açılıp kapanmama yapıyordu arasira şimdi bunun aynı oldu yani 2 yıl garanti çok az ayriyeten bu bence kronik bir arıza
merhaba nasil cozdun harizayi tesekkurler
@@mihamil9846 Merhaba, sen çözebildin mi, aynı sorun bende var şimdi?
@@OGERTY merhaba attim depoya hic ugrasamadin.
Same problems can you help me?
Did you find the solution?
Кажется мне, что у Вам просто неудачный аппарат попался. Мой работает без ошибок,тьфу-тьфу. Была в начале проблемка с Хромом - он просто не открывался, но проблема быстро решилась - После ночного простоя без питания, при следующем включении ТВ нашел обновления, установил их и после этого все стало на свои места. Наличие полноценного браузера - очень полезная штука! Отмечу следующее:
1) Быстрый, на практике тормозов не заметил, только при загрузке 2) Андроидовские игрухи не тормозят 3) Можно переместить приложения на внешний диск 4) При некоторых манипуляциях можно разблокировать "unknown sources" и устанавливать любые приложения, правда качать их не из маркета 5) xbmc стал и запустился
Да, возможно. Потому что после замены по гарантии на аналогичный, он работает без нареканий с конца января.
В целом девайс неплохой, со своими минусами, но и не без достоинств.
Из недостатков хотелось бы отметить:
1. Плавность (digital narutal motion) не работает в режиме 3D
2. Нет настроек глубины 2D-3D
3. Малый угол обзора 3D, чуть ниже или выше середины - полэкрана двоится
4. Опция ClearLCD, повышающая отклик матрицы, всегда неактивна
5. ТВ в 90% случаев не может открыть все файлы "каталог медиаресурсов" через DLNA по проводной сети
6. Аналогично не всегда открывается список всех файлов с USB
7. Вся андроидная часть работает в FullHD а не в 4k, т.е. все программы нечёткие, включая галереи изображений, браузер и прочее
8. Не играются 4k файлы (но это мелким шрифтом указано в документации)
9. Очень некачественный алгоритм уменьшения фотографий до 4k (nearest neighbor), фотки с зеркалки портит
10. В режиме слайдшоу по красной кнопке все фотографии сжимаются до FullHD а не 4k
11. Иногда вертикальные фотографии непропорционально растягиваются на весь экран
12. При просмотре фотографий с середины списка невозможно пролистать предыдущие фотографии, выкидывает в список файлов
13. Не передаётся 5.1 звук по HDMI Arc при DLNA/USB просмотре, несмотря на включенную настройку "выводить звук в многоканале"
14. Не всегда срабатывает HDMI Arc, приходится перезагружать ресивер и ТВ
15. Нет детектирования чёрных полей в ТВ режиме (автоформат) и алгоритма нелинейного растяжения 4:3->16:9, которое было во всех тв за последние 8 лет, в том числе и в моих 2-х предыдущих Philips
16. По DLNA/USB нет информации о видеофайле (о разрешении видео, о звуке, каналах)
18. Матрица 60Hz, на более дорогих моделях 4k матрица 120Hz
Слушайте! Прошу прощения. А откуда у Вас информация по поводу матрицы с частотой 60Hz? Или это личным ощущениям? Тут же вроде как самсунговская VA-120hz, модель то серии 7-й. По идее должно быть 100 герц.
Bende de aynı sorun var. Yorumları okuduktan sonra sol arkadaki açma kapama düğmesinin kapağını söküp aşağı doğru sonra yukarı doğru basılı tuttum. Sonra birden açıldı. Siz de deneyin isterseniz
merhaba bana yardim et nasil cozdun sagol.
Donanım haber e ayrıntılı yazdım. 55pus7909 ile aratırsan iyi olur
I have the exact same issue now! Did you find a solution? thanks!
Yes!
When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen
remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside.
When you look at the backside, you will find 3 massive thermalpads.
Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board.
Dry the board with a hairdryer after you remove the moist on it and assemble the tv and remember the ambilight :)
Let me know how it works.
@@freddyen i tried and it finally worked after almost a week.
Thanks ALOT!
Np! :)
My own screen died though, it worked for allmost a year but finally went coocoo, so i purchased another.
Still an easy way of using the screen while saving up to another.
@@freddyen Hi, i have the same problem and i want to try your solution. Do you have a video for that so its easier for me to do it. Thx :)
@@3mar_xg255 unfortunatly no, but tale a a look at the backside of the tv, it's pretty easy😊
Де би лойд!!
такая же беда только с philips 55pus7909 как исправить то?????
у меня проработал 2 года и теперь такая же шляпа
Самому исправить мне не удалось, только сервис. Мне повезло, что был ещё на гарантии. Подозреваю, что это болячка.
Есть решение
@@user-vz8hs1ps4f tak gde ono i kakoje?? Est est no nenapishesh....
Bu tv nin aynisi vardi bende 2016 tuketici hakem heyetine verdim ve parami iade ettiler.
Bendede var aynisi garantisi biteli 2 ay oldu ayni arizayi veriyor
Bende başvursam heyete paramı geri alabilirmiyim.
you are able to solve the problem? Regards
Not resolved. I handed him to warranty repair.
nashol problemu ?
Нет, не нашел. Сдал в гарантийный ремонт, по результатам отпишусь (по истечении 45 дней согласно законодательству).
Дмитрий Гальцев 2 года прошло и какая проблема была, мать?
Hi
Donanım haber de ‘’Philips 55PUS7909 Açılma Sorunu’’ şeklinde bir konu açtım. Bu sorunu yazılımı yenileyerek çözdüm. Mesaj atarsanız yardımcı olmaya çalışırım.
Hello. How do you fix this problem please tell me? Best Regards.
www.donanımhaber.com go this site. And search on forum ‘philips55PUS7909 Açılma sorunu’
I writed everting. You can translate vith google
Kardeş donanımhberdeki başlığını okudum aşağı tuşa basarak girdiğin ekrana ben giremiyorum işte başka sitelerde de önerilmişti bu. Bi kere tv şans eseri açıldı sonra gene kapandı yine aynı şey 5 dk sonra. Senin şu tamirci arkadaşına ben de bi götürmek isterim hem o da ekmek kazansın. Adresi verirsen... Teşekkürler. Bu arada istanbuldayım.
Abi bana yardımcı olurmusun
Вот и мой 65PUS9109/12 через 1 год и 11 месяцев 13.02.17 перешёл в этот режим старт-перезагрузка. Печалька. Кто знает как лечить буду благодарен.
Юрий, если удастся найти решение проблемы, отпишитесь, пож-ста, здесь.
When you want to currys PC world it will go on and off and the plug and a remote will go up to your USB cable or USB port on your phone
Не стоит брать, что в итоге?
Не ремонто пригоден, замена на новый по гарантии.
3-й месяц полет нормальный, а картинка все-таки потрясающая у него.
Дмитрий Гальцев есть ли зависания, глюки?
как ведет себя в 4к, 3Д
в играх и фильмах есть ли задержки?
спасибо
CityBorispol
Зависания бывают, глюки тоже, все же Андроид старый со всеми вытекающими.
Для 3д не лучший вариант, глубина небольшая и задние планы двоятся. В сравнении с Самсунгом на кухне, который дешевле в 2 раза и с активным 3д. Там картинка действительно объёмная, с хорошей глубиной и большими углами просмотра.
Более подробно о недостатках ниже в комментах.
Взял LG 730. О чем ни разу не пожалел
трусы отличные
Спасибо!
хах) смеюсь в слух!
trying to root the android?
For what purpose? It has been replaced by warranty.
+Дмитрий Гальцев for what? for having good item :)
how to ??
Anyone has solved this issue!!?
Yes!
When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen
remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside.
When you look at the backside, you will find 3 massive thermalpads.
Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board.
Dry the board with a hairdryer after you remove the moist on it and assemble the tv and remember the ambilight :)
Let me know how it works.
Freddy Kristensen ًُ
I have had the same problem. All yoiu need to upgrade softwire
Doesn’t work unfortunately. Tv is completely unresponsive to any kind of usb I put in
awful backlight bleed even at DAY!
I have the very bad TV brand on the same issue
as mentioned to others commenting on this:
"Yes!
When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen
remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside.
When you look at the backside, you will find 3 massive thermalpads.
Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board.
Dry the board with a hairdryer after you remove the moist on it and assemble the tv and remember the ambilight :)
Let me know how it works."
@@freddyen
It works as you said!
Philips 55put6401 resuscitated by your method!
Thank you very much!!!
@@Clasic6 your TV works again? :) its always great to have positive feedbacks, thank you so much!! =)
@@Clasic6 btw, i know how to allow the "unknown scources" in the android options, that way you can install the pornhubap...uhm... kodi and stuff! ^^
Freddy Kristensen . I have same problem
Toplasan 1000 saat anca çalışmıştır sanırım .. ilk önceleri Kendi kendine kapanıp açılıyor du. Sonra ses çıkmadı son olarak bu. Garanti de bitti 4 ay önce . Bundan sonra bin TL verip ucuz bişey alacağım
aynen tv çöp.2 kere servise gitti anakart değişti yine arıza.bunu philipsin götüne sokacaksın aslında bile bile arızalı ürün satıyorlar
Aynı sorunu şuan bende yaşıyorum 2 yıldır öyle duruyor çok pişmanımm
Есть решение
el peor televisor que me he comprado
Servis 550 TL istedi yapılsın dedim bakalım ne olacak
anakart değişti 6 ay sonra yine aynı.oç bunlar bozuk malı kakalıyolar
Neoldu sonra duzeldimi tv bendede aynı sorun var.
@@suleymanylmaz1413 ayda bir yazılım atıyorum android recovery ekranından.yakında çöpe atıcam.2 gün tvyi açmazsan sapıtıyor
Bende anakart yanmış dediler yapılsa 750 tl yeni kart takılırsa fiyatı 1750tl dediler
@@suleymanylmaz1413 yazık günah yazılım donanımı bozuyor yine aynı olacak.panelini sat kaç para veriyorsa servis git yeni tv al 2 bin liraya sıfır tvler var.ben bozulunca bi daha phlips almam ucuz bişey alırım
cpu problem
Yanıtınıza denk geldim. Benim 8109 philips tv de durum aynen bu şuanda.Bir çözümü var mı kendim yapabileceğim bildiğiniz?
@@OGERTY malesef cpu arızası
When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen
remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside.
When you look at the backside, you will find 3 massive thermalpads.
Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board.
Dry the board with a hairdryer after you remove the moist on it and assemble the tv. dont forget the ambilight :)
Let me know how it works.
I did the same as you did, but no improvement.
@@hidrojen091 did u dry the PCB om all 3 pads agter removig the moist? And resetted the software?
Hey Freddy,
I'm having the same issue with my TV. Would you be able to make a tutorial on the above? or take payment for walking this through step by step on a video call?
Many thanks - Harrison
To make a tutorial would require, taking apart my tv once more, risking to drop it or something else, its kinda heavy as you might know :)
But sure, i can try walk you through it.
what kinda messenger do you have?
we can use messenger, how do i find you?
Ну что? Говно Ваш Филипс с андройдом, а ты его нахваливал - эх. Как там по англицки? )))) А по факту - сочувствую(((
Как не печально, но Philips продал свое направление по телекам китайской TPV в 2013 году. Аудио и видео - японскому Фунай. Т.е. у Philips только медицинское оборудование и свет.
У вышеобозначенных полные права от разработки до производства, шильдик Philips по франшизе.
Хотя телек не плох, функционал Андроида и шикарная палитра Philips как и раньше. Но профанаций и развода маркетологов тоже немало, в том числе 4к и функционал Андроида именно для этого девайса.
От сюда вывод - Телики Филипс больше не покупать!
koshff2 но, не могу сказать, что картинка гавно. Она все так же превосходна, все те же естественные цвета, эмбилайт и отсутствие засветки.
На мой взгляд надо подождать пару лет, 2-3 поколения и они догонят конкурентов по функциональности и юзабилити ПО.
Дмитрий Гальцев
ты считаешь, что есть не глючащие телевизоры?
koshff2 возможно Панас, Сони. Сони по дизайну не плохи и ближе всего к Филлам.
Reboot system now
Crappy brand and equipment