Well well, that escalated quickly
HTML-код
- Опубликовано: 6 фев 2025
- » vasyn.com «
• Links to Where I Purchase Parts:
eBay: goo.gl/LwmuxE\
Amazon: amzn.to/2z6hMbF
• Camera Equipment I Use:
Main Camera: amzn.to/2W2ZLId
Backup Camera: amzn.to/3gMgjwj
Go Pro: amzn.to/31Yi59n
Main Lens: amzn.to/2ZX7ZTB
Backup Lens: amzn.to/2W2OgAM
Photo Lens: amzn.to/2O8sc35
Microphone: amzn.to/31ZRDfo
Drone: amzn.to/3iMOIwJ
Gimbal: amzn.to/321daUZ
• Instagram: / dvniemela
• Facebook: / dvniemela
• Sponsors: (Discount Codes)
avalonking.com... (DEVIN25)
SK Tools: bit.ly/3mdXhSl (DVNIEMELA)
IAA: bit.ly/3cMmRKk (DEVIN2022)
litlightz.com (DVNIEMELA15)
www.braumracin... (DVNIEMELA)
aprperformance...
www.prismaticp...
www.maperforma...
» Send Me Stuff «
Devin Niemela
P.O. Box 48687
Spokane, WA 99228
Hey Devin I have experience in this. A little bit of advice. Find a mid brand paint with a good paint mixer working for the company. Im in the industry and no one uses Deltron. Deltron PPG will make shops go out of business on material costs. No bueno. Also be careful on the hood because you primed to the tape line. Never do that because your base coat will make an edge and it will show up just like that with an edge and you'll def see it when you clear. Too avoid that make sure you DA that edge flat. Feather the hell out of it. Start blend priming. Kinda how you did the fender just dont let the primer get to the tape line. Also look into high compression fittings for your paint gun and upgrade guns. Check out Iwata Lph400. Thats a sweet beginner/ intermediate paint gun. And the color they mixed isnt too bad. The rule of thumb with blending is : its better to blend a lighter color than darker color. But if your not happy with the color just bring the spray out card to the paint company and they should re tint it for you. The 2nd time always matches on point. Keep it up sirr, you got us Florida boys watching! If you ever need any advice in paint and refinishing reach out to my channel. Take care!
Yooo the smoker is a big come up an a well needed house mod for sure 🤙🏼
Devin, we all know you for your hard work ethic and never give up on a project mentality. Your grit throughout working on projects inspires everyone that watches your channel. I think you shouldn’t let money get in the way of you improving your painting skills. You’re very good at figuring out how to make things work and being proud of what you accomplished and the work you put in. I say you paint the parts but be very meticulous and do a lot of research on it so you’re sure that it will turn out good.
You have to bend the card To match the contour of the panel so the light hits it the same on both surfaces. Then you can see if the paint matches
when i painting car bumbers i sanding the bumper with 320 with a da and hard reatch areas with 320 sponge after that i spray 4 to 1 ration standox primer 3 coats then dry sand that with a 500 paper to make it smooth with the DA, pro tip use black powder guide coat to know when ur panel is flat then after that go over all with brown/red scothbrite to to make ur edges uniform and smooth, you will get glas surface when u lay ur clearcoat :)
Booger Boy 😅😂😂 Bobbi turned savage once Berrys head got lifted. ROASTED
I can imagine Devon one day hiring people for work and one of the job descriptions would say no lunch you get cashew lol 😂😂😂 I'd work anyways!
Your work is amazing cuz u never give up even if the colours don't correspond good job
For that price for just base I would want the base to be perfect match, so I would go and get it redone, but for cheaper paint in the 100-200$ range I would of sprayed it since your still blending.
I wouldn’t blend that far into the fender like you were saying so there’s a bit more original color left.
Color matches good I think the curved pillar Vs flat paper was throwing your eyes off
Idk how you do it. And idk how long/old I gotta be/wait to have a garage and daily activities like u but I hope I get to have a garage and just the cars and work ethic that you have. Big inspiration
I think the flake is just settling different on your card. Fanning out the blend at a diagonal spray during the blend should help. That's what paint society does. Before I learned that, I just did the light fan spray of metallics before clear. It came out pretty damn well and your definitely more skilled then me.
The bumper turned out amazing for sure! I To your point, it's hard to paint match on different surfaces, even from factory. I always get annoyed when I notice how different my 2015 STi bumper is from the hood and fenders. Not by much, but I notice it cannot un see it.😅😅
'This car is perfection'....literally 3 videos later...'We're changing everything' I love you man. Keep up the grind. You've inspired me to tackle car projects I normally would not have.
Alright big baller over here changing his oil
black is the hardest paint to spray besides pearlescent colours it usually gets sprayed all at once - whole car so it all matches
Adjust the pressure spray it darker. Anyways blend will trick eye into thinking same colour. It will bre really hard to find difference. Spray card has a sharp edge and will always be slightly different.
Anyone knows where the small hose attached to the 90 degree fitting on the coolant tank goes? Got myself one but I found no info in where the plug it/route it. The line I’m talking about is showed next to the coolant reservoir cap at 0:42
Where’s the other WRX you bought?
great interesting video devin can bobbi have a lunch break lol
When painting a test card always lacquer them and check the test card in natural light
Well Devin you finally did it, I’m following you by getting a varis kit for my STI, but it may be for my original STI I bought or my current one, idk if I’m buying my first STI back or not yet
@devin .. you will love that smoker , I have the same exact one and it awesome !!
Match to the doors/sail panels . Never match to a gas cap. They are usually a different color. I would do another spray out. Do two medium wet coats and then do a orientation coat to level out the metallics. That will give you your accurate color. Since you’re blending the fenders I would base the whole hood and blend the top of the fenders and where the bumpers butt up to. Hard to tell at the color through the screen but think to yourself what does the spray out card need that the car has? More brown? More black? Then go back to the store and tell them what you think. Hopefully someone there can tint the color for you. Otherwise best bet is to get a camera shot or the doors and go from there. Good luck!
Love the daily uploads cant get enough keep it up man
Paint has flop looks different at different angles and that one at 25 had the best flop imo
Banger m8, loving the daily uploads!
Pay attention to hard lines painting primer. They can show after painting or create a wave.
When are gonna do another house mod and get that garage painted and the floor epoxied??
I assemble those in about 30 minutes make sure you keep the legs loose before tightening all the bolts on the bottom
I would try a few more test pieces and see if you like the outcome better or worst case spray the side skirts and put them on and see if you love it then before you spray everything
I love how you two always keep those cars clean. What wheels are on the Evo 8?
Paint the whole hood and blow the tops of the guards in or it will look shit
these constant upload from devin is getting great. love the content bro
Can you have Bobbi’s dad come by and show you and us with your equipment? Cuss you know he has the good stuff. But we have what you have!! See how he would do the blending of paint ?
Bend the card with the contour of the car when you compare the colors.
It looks like you keep checking the color using the dark primer end and not the light primer end when your using light primer. That’s the point of the card and the 3 shades of primer.
From Kenya 🇰🇪 🇰🇪 🇰🇪 🇰🇪 🇰🇪 with love
tuko wakenya
Lazima hapa
Safi sana
We all here 🙌
Habari marafiki
I know there's 25 G's in that Garage , Blake wouldn't be stealing the cars , I use a bubble balancer from Harbor Freight What a small smart investment
Definitely could have brought the paint shop that fuel door and had them match it up with that vs the paint code
In the beginning of the vid it looked like he took it with them if I’m not mistaken
@@awsomeness9901 my bad if they did, thats just usually what i do when matching. It seems to get a better result on older paint
@@kylenear3145 100% I agree with that!
phantom black is realy nice on the evo. i got the same colour on my evo x :)
Why don’t you get an app to match car painted to your need ? , u need excellent camera down load app to match your paint coat ? Either PPG or DuPont, they will set your right paint mix match ? Or any app deal with matches
15:45 because your shop light color temp is different.
"Well I opened the hood so I mine as well just build the whole car" -Devin Niemila
When doing metallic paint mate .. do I drop coat before you put clear on so the metallic particles stand up
Devin you need get brand deal for scotch brite pads.you ❤️ them things:)
Same color as my car have to blend and you be good. 2012 Evo x
Devon love the channel. Btw your into subis and evos, have you tought about geting into skylines??
“BUTTER BOI” NEW STICKER
Loved her reaction why did you do that
Honestly would like to see what you cook up in that smoker🔥
There is levels to this game and this dudes work ethic is on a different level completely 👏 great job 👌♥️
That's wat Adderall does to yah
trust the process Bobbi....trust the process
Any old school cars?
@Devin you always have me keep it lit
Chill songs today I dig it
Papa dev is like some smoked ribs this weekend
I think u should go paint match it better cause I don't see any brown in it at any angle .
The Mitsubishi Designers did such a beautiful job on the front bumper design, not a fan of the Varis and Chargespeed bumpers myself.
Hey Devin, is the old phantom black front bumper that you took off of Bobby’s car for sale?
Next time you are filling stone chips use a razor blade as a spreader, it’s a lot more precise and you don’t get big blobs of glaze all around the chips
Hey bud your going to have problems on that hood with a ghost line in your paint because of the hard edge you might wanna sand that and reprime past the last section and flip your paper and feather it off before than resand good luck
I remember when it was devin starting his Evo and bob starting her Sti…. Oh how times have changed 😂
Good boy make her work for her car. Lol sorry Bobbi. U are lazy for ur cars. U need to help sometime.
What up Devin, love the content, quick question which cordless impact wrench do you use?
I wanna see how much the paint stuff actually costs you
I have the same smoker
You need to roll the tape so you don't leave hard lines
Best couple car team 🔥
well this is an easy one. just paint out the simplest smallest type part you have. and let that decide what you do next. you aint gotta do it all at once bruhski. make sure something looks right after a respray then grade up from there. and make sure the foxy thang helpin ya wears a mask when using a sander even outside. cant have her dying off or the channel would be half what it is. much love.
Must not have watched bruhski 😂
why is bobbi so fire my guy?
What wheels are those?
Vasyn automotive coming soon
is it me or is that a type r in the back?
You can't compare flat sample with curved surface. Not with this kind of color anyway.
Devin why don't you get with Bobbi's father and have him help you the paint matching?
CARBON HOOD SCOOPS!!!!!
Take it to Bobbi’s dad…
It's metallic paint is why,
Devin, I agree, while hard to tell watching a vid, the color looks a tad off. Like its a touch darker than the original car color. The car has this slight brown tint to the black. At some points, it almost looks like there is purple but I think its the more brown tint in the black that I am seeing. Close but yeah, I would def ask and see what they say.
solid colors are the only way to go. metal flake, and pearls are miserable to make a 100% match. for a guy who likes to tinker with body work, by cars with plain solid colors.
When is the building a STI hatchback in 20 minutes video
def get some some help to match the paint better
💯🔥👌🏽
BRO WHO’s TYPE R IS THAT!!!??!!!
25 psi looks like it would get you closer
Legendary
Killin it
🚩🚩🚩🚩 she didn’t want your breath particles smh
👍🏻
Ppl don't want your breath particles, only other particles, lol.
please wear masks when sanding down stuff....dont want u to inhale any weird plastic particles....and alwaays use the expensive or best quality painnts and clears
All the adds in this one
✌🏽✌🏽✌🏽
Just wrap it
🤑🤑
What EVO 10? # NISSAN!. It's my fault, i need to stop watching this channel if all you do now is NISSAN stuff.
why put a body kit on a evo what a gronk