Ledlenser MH10 LED Headlamp
HTML-код
- Опубликовано: 11 июл 2024
- With the best weight to power ratio in the MH headlamp range, the MH10 from Ledlenser is a rechargeable and lightweight headlamp suitable for all kinds of adventures.
Providing 600 lumens of light, a 150m beam range, an IPX4 waterproof rating, and red and green colour filters included - this unit has a whole host of features to functionally illuminate your expeditions.
In this video, our gear expert Liam takes you through all of the handy features of the MH10 as well as what you get in the box, how to charge it, installing the battery, adjusting the band, and how to cycle through the settings - so check it out above!
For more details on the MH10 LED Headlamp from Ledlenser head over to Snowys:
www.snowys.com.au/mh10-led-he...
0:00 - Intro
0:24 - USB rechargable battery
0:45 - Weight & dimensions
0:56 - Materials
1:06 - Headband
1:28 - Lumens & runtime
1:55 - Rear safety light
2:02 - Filters
2:14 - Adjustable focus
Thank you!!!!
You're welcome. ~ Ben
I've got a 30 dollar T6 XML ebay headlamp that is amazing. It's bright, has a variable angle beam and the batteries last for days. The only downside is it's pretty bulky and on the heavy side so not the greatest when weight and space is at a premium. But for 4wd camping, it's perfect.
Thanks for your feedback, Spacegoat92. ~ Ben
Stop worrying everyone, I got the focus working!
Tried pliers, too abrasive.
But may have loosened enough for me to wiggle back n forth till it smoothly wound out.
phew!
Glad you got it sorted, Sam, let us know if you have any other hassles. ~ Ben
I had the same problem, I got it to work whit some pliers too
The zoom ring is so tight that you need both hands to adjust it. With gloves on it is difficult to adjust it at all in fact. This way way better on the older models like the SEO5 for example. The light switch should be a little bigger and more tactile (not so round and smooth) so that you could feel where it is and operate it with gloves on. The light beam is not as evenly distributed as it was on older models. Feels like led lenser has lowered their aim a bit. Other than that, the light is bright and fits quite well around the head.
Thanks for your feedback, TheStripper! Cheers, Laine
I cant get mine to focus. Seems stuck.
Hey.why my ledlenser turn after 2 minutes from max to medium light? Bartery is full
We'd recommend trying it with another battery to see if the current battery is faulty, if possible.
Otherwise get intouch with your retailer and the warranty team can take a look, see what may be the issue.
~ Lauren
@@SnowysOutdoors I bought another one, new Ledlenser but it seems it works the same... before it was okay, it was working for 10h with 600 lumens. I send it to the retailer, but they said it is ok... how to program it? Instruction says we can use 3 diffrend modes and lock or unlock it, but it doesnt work... As is says i press the button for 16 seconds to set the mode. I think I need to program this somehow in other way?? or I got craped 2 ledlensers...
10h run time on the brightest setting.. Are you sure or was that a lie?
10 hours at the 600 lumen setting is what Led Lenser claim, Gandeloft. ~ Ben
Can the MH10 be strapped on a hardhat?
We don't actually have a hardhat here to try this out, but the headband is fully adjustable and quite large/stretchy, so you should be able to fit it over
~ Lauren
Keine Aufnahmen von Draußen in Dunkeln?
Nein, tut uns leid, wir filmen normalerweise tagsüber. Es ist sowieso schwierig, die Kamera dazu zu bringen, eine gute Darstellung der Nachtleistung zu geben. ~Ben
Я купил фонарь и он нагревается сильно где метал это нормально ?
Мощные светодиодные фонари обычно сильно нагреваются, так что это не редкость.
Как правило, высокие режимы освещения имеют ограничение по времени, чтобы они не перегревались.
~ Lauren
Do you sell separate batteries 🔋 or not ?!!!
Let say someone needs extra battery ?!!!
We have a HiTech battery, Holy Butterfly, check it out here (www.snowys.com.au/hitech-2600mah-rechargable-li-ion-battery). The MH10 uses a standard 18650 3.7V battery which you can pick up at most battery, electronic or even hardware stores. If you want the genuine Led Lenser replacement then get in touch and we'll see what we can sort out for you. 1300 914 007. ~ Ben
Not true, on high bream after 6-8 minutes it drops to mid power. So how can it run for 10 hours. You’ve not used this head torch in the field
Very interesting on your take
Thank you
Hi Paul, we've not used all our products in the field, and rely on manufacturer information for data like run times and lumens. Led Lenser do state that the minimum run time is 10 hours, and this may vary a little depending on certain conditions, but if you are only getting 6-8 minutes then there may be an issue with your headlamp.
If you purchased your headlamp from us then you can use this form (www.snowys.com.au/returns-warranties) and we will look into it for you, otherwise I'd suggest asking at the place of purchase. ~ Ben
@@SnowysOutdoors No, it's not an issue. The headlamp has 3 program modes in which you can switch/choose operation. Have a look into the manual. By holding the green on/off button for an amount of time you can cycle through the different modes.
Hi Paul. Read the manual. It is probaply set to one of the different modes.
@@SnowysOutdoors this headlamps use a 18650 accu 3.6v 3400ma, all the other (honest) manufacturer of headlamp who use this (armytek/nitecore/go'lum for exemple) tell that at 500lumens it give about 3-3h30 of run time so at 600lumens no matter what you do you can't reach 10h (with 600lumens non stop)...so you have to cheat and drop the lumens after few time to reach 10h... you can get 10h with about 180lumens...
All the main brand are playing this game (and acting like asshole) they tell you the lumens after 30s and the duration when it drop under 10% of this lumens. Once you knew the ANSI reglemntation you understand all the crap they said.
Mike It is set to default and when I changed the mode it made no difference, it still drops to a lower power. All can be done is the order of which mode to use. When I take out the battery and replace it goes back to default. Due to where the on of switch is I’ve found it switches on in my pack so I turn the battery around
Cheers
@1:36 never gonna last 10h...do the test, you will see the light will drop to run 10h.
We don't have the facilities to accurately test all these specifications, Goldrush, so we need to rely on what the manufacturer tell us. In the instance of the MH10, Led Lennser specify that it has a maximum lumen output of 600 lumens at 150 metres, with a runtime of 10 hours. ~ Ben
@@SnowysOutdoors Goldrush is right, my MH10 does drop in intensity from maximum after a few minutes. However as you point out, the manufacturer states a "maximum" output of 600 lumens (doesn't say continuous) and a runtime of 10 hours (doesn't state the average lumens to achieve this). It is sneaky, but it is what it is. I still use it and it serves its purpose though.
@@kahuna1247 we try to bring all the specs onto a level playing field on our website, but we are sometimes confused with all the settings on headlamps these days.
There are many brands that will state the maximum output, but is only useful for short periods. So not technically wrong, but not particularly useful.
~ Ben
@@kahuna1247 It switches to a lower default mode,if you hold the power button for 16 seconds it flashes 3 times and remains on full power,mine lasted 10 hrs on full,best headlamp ive ever owned
HD 3 led lenser caplights, first was great, it got stolen, the next 2 both failed within 12 months, wouldnt buy another one in a blue fit
We've always had good feedback on the Led Lenser range, Brian, but that's not to say they have been without fault from time to time. Have you submitted a warranty claim, if they are less than 12 months old then it would be worth having it looked into. ~ Ben
The red and green light filters are useless and keep popping off. Poor design given what they charge for these units. Mine won't stay on for a minute and poorly attached. I would've thought the company would put a bit more thought into this
I've not heard of anyone having problems before, mrdilligaf1968, it might be worth taking it back to where you purchased the items to see if there is an issue. ~ Ben
Ditto not too mention how incredibly hot the unit got during the few seconds the filter was on (before popping off)! So frustrating!
Not true mh 10 goes to a dimmer setting in a few minutes would not recommend
Thanks for your feedback, Mike. ~ Ben