That one sure looks like it's been opened before. That plastic card is sliding too easily across the edges and the person's hand is not even burning from the "heat" on the glass. This video is still instructional on how to do it, but doesn't quite show the struggles involved in actually doing it. Note; A lot of careful scraping and profuse cursing is involved. Special care needs considering while slicing that lower right side where the three cables are which are easily cut noted earlier by a viewer.
The process of removing the screen is taking too much time and we have shorten it.Just needs to be very gentle and pry the screen after heat. Removing tablet screen are complicated and need lot of patience.
THANK YOU. Not one of these videos show how difficult it is to get even a razor blade between the glass and backing. They’ve all been opened before, closed, and reopened for the videos. The most difficult part is never shown. Once you’re inside, then it’s easy and nobody needs a video showing the guts phase.
Thank you. I am wondering if one can still use a normal professional phon, or other techniques like the sun and a black mat that absorbes sun energy and then position after some minutes of exposition of it to the sun, the Ipad so that the glue loses grip ... If repair costs too much it then can become better to ask Apple directly to work on it. The problem is that they do not repair, they just ask you for more money... to buy something new. No to consumerism
Be carefull You will destroy the Connection between the Touch Screen Glass iyou removecinntze First step an the Logic Board Heinz this plastic Card to Cut the Touch Glass3s glue Its total bullshit that This Guy doesnt Show the exactly Part you should Not Cut to deep with the Card So watch other Videos aus Well
Always you should not go that deep. And also cables are on the right hand side. You need to open from left to the right.The process of cutting adhesive takes time and need patience. We did a slight mistake by editing the screen removal process. It takes some time. Always advice to watch the video before performing the repair.Thanks for you valuable feedback.
@@destiny1230ful few things you can do to diagnose , - check the device is detecting in pc or laptop when connected (if it is detecting, your screen is broken or loose connection) - if it is not detecting in pc or lap, it might be loose battery connection or bad battery - you can try a new battery These are some of the basics you can try.
Thanks! This really helped out.
Thanks for the tip and glad you liked it.🙏
Straightforward presentation. Have an upvote.
Thank You
Thankyou so much! excellent easy to follow tutorial
Thanks for your feedback
This is definitely one of the better repair video’s I’ve seen - will be ordering a battery from you guys. !
Many thanks
Glad it was helpful!
Great and very helpful video
Glad it was helpful!
Great video many thanks !!
What glue to you use, and where can one buy a battery for an iPad Air?
You can use b7000/t7000 glue. For the battery, your location
?
4:12 remove 5 screws (two a different size than the other 3) & tape
Thanks for your feedback
nice thankyou brother
Welcome
exellent great video
Thanks
What’s a good battery to ask for if I get my battery replaced by a pro?
There are good OEM ones, Location?
@@DIYGeardo Chicago suburbs, US
Thanks @diygeardo
where can I find the home screen button flap that the black tape holds down once the little door is closed?
Where is your location
@@DIYGeardo Newport, RhodeIskand
Rhode Island
That one sure looks like it's been opened before. That plastic card is sliding too easily across the edges and the person's hand is not even burning from the "heat" on the glass. This video is still instructional on how to do it, but doesn't quite show the struggles involved in actually doing it. Note; A lot of careful scraping and profuse cursing is involved. Special care needs considering while slicing that lower right side where the three cables are which are easily cut noted earlier by a viewer.
The process of removing the screen is taking too much time and we have shorten it.Just needs to be very gentle and pry the screen after heat. Removing tablet screen are complicated and need lot of patience.
THANK YOU. Not one of these videos show how difficult it is to get even a razor blade between the glass and backing. They’ve all been opened before, closed, and reopened for the videos. The most difficult part is never shown. Once you’re inside, then it’s easy and nobody needs a video showing the guts phase.
Can we buy battery
Yes. location?
@@DIYGeardo I will but in august
great vid, thanks
Thanks
whats the name of the glue i restore 2 of my phones and tablet but i dont know what glue is that im using glustick sometimes double adhesive tape
B7000/T7000
ser gut danke
Thanks
Nice vid but could not understand what type of glue or what you said when it came to the part of gluing it back together.....
Pre cut double sided tape or b7000/t7000 glue.. if you are going with tape, make sure it is an original pre cut tape
@@DIYGeardo Thank you.
the cable on the right side came off the glass screen. Is that fixable?
Flex cables can't replace that easy in this models. Need the complete digitizer
How to get Ipad air 1 battery?
You can buy it on ebay or amazon
jstech.com.au/global
Thank you.
I am wondering if one can still use a normal professional phon, or other techniques like the sun and a black mat that absorbes sun energy and then position after some minutes of exposition of it to the sun, the Ipad so that the glue loses grip ...
If repair costs too much it then can become better to ask Apple directly to work on it.
The problem is that they do not repair, they just ask you for more money... to buy something new. No to consumerism
Heating always helps to loosen the grip, but with this way i am not sure, but always can give a shot.But i am not suggesting
@@DIYGeardo thanks i will do with the heat gun
Be carefull
You will destroy the Connection between the Touch Screen Glass iyou removecinntze First step an the Logic Board Heinz this plastic Card to Cut the Touch Glass3s glue
Its total bullshit that This Guy doesnt Show the exactly Part you should Not Cut to deep with the Card
So watch other Videos aus Well
Always you should not go that deep. And also cables are on the right hand side. You need to open from left to the right.The process of cutting adhesive takes time and need patience. We did a slight mistake by editing the screen removal process. It takes some time. Always advice to watch the video before performing the repair.Thanks for you valuable feedback.
I followed everything but the ipad is not turning on, please help!
Is the charging sign visible ? I feels like loose connection
@@DIYGeardo no charging sign
@@destiny1230ful few things you can do to diagnose ,
- check the device is detecting in pc or laptop when connected (if it is detecting, your screen is broken or loose connection)
- if it is not detecting in pc or lap, it might be loose battery connection or bad battery
- you can try a new battery
These are some of the basics you can try.
@@DIYGeardo it worked! However the apple icon comes on and disappears smh....it's not turning on as is customary. Is something not connected?
@@destiny1230ful have you double check all connections?
Get rid of that bloody music !!!
Thanks for your feedback
super annoying music
Sorry about that.. we will work on it
@@DIYGeardoI should say 'distracting' .. I think its because it requires more skill than the average person can do easily..
@@shaanee I understand.. will work with editing.. thanks for your feedback..