What's the purpose of the last couple of solder spots you put down on the nickel strips, but that weren't connecting anything? And where did you get those small snips?
There were 2500mah cells in it and i changed them to 2000mah. Because i had only those :/ the red light blinking red means battery damaged :/ is this light because the cells smaller capacity? Thanx for answer
It was great! I have a 36-18 multi-volt battery! When I connect it to the device! Its batteries are getting hot! And it catches fire from one of the battery connections and is cut off! This happens without turning on the device! As soon as I install the battery on the device! What is the cause? can you guide me Thank you🙏🏼
I guess you are using 18v drill/device. The battery contains two rows with 4v x 5 lithium batteries aka 20v. To make 36v it combine the 2 rows in series. But when you connect it in 18v device it makes both rows work in paralell. A known fault is that one of the rows has cells in it that are broken. Thats why it gets hot. The charger using 18v to charge the cells in paralell.
What spot welder machine are you using? Could you provide the model too please?
Diy
What's the purpose of the last couple of solder spots you put down on the nickel strips, but that weren't connecting anything? And where did you get those small snips?
Do these ones deactivate the board when power is removed as a way to prevent repacking cells like miluwaukee does?
I ruined one of the case screws. What size screw do I need to get for the Hitachi 18V battery pack casing?
There were 2500mah cells in it and i changed them to 2000mah. Because i had only those :/ the red light blinking red means battery damaged :/ is this light because the cells smaller capacity? Thanx for answer
I changed 2 dead cells in mine . Now have 19v on tester and works in drill 🙂but😭 still flashing when in charger😭 what might fix the new issue?
It was great! I have a 36-18 multi-volt battery! When I connect it to the device! Its batteries are getting hot! And it catches fire from one of the battery connections and is cut off! This happens without turning on the device! As soon as I install the battery on the device! What is the cause? can you guide me Thank you🙏🏼
I guess you are using 18v drill/device. The battery contains two rows with 4v x 5 lithium batteries aka 20v.
To make 36v it combine the 2 rows in series. But when you connect it in 18v device it makes both rows work in paralell. A known fault is that one of the rows has cells in it that are broken. Thats why it gets hot. The charger using 18v to charge the cells in paralell.
Thank you for your reply, best regards, Mehrdad Farazmand
You don't need to replace all batteries
I thought we was going to see a repair not a renewal of batterys good video thou
Not worth. these tools are long gone. for price of repair single battery you can buy new tool
💪 Promo-SM!
Horrible