This video has been updated. Here's the Jetson Nano video: ruclips.net/video/epSAtsCOii4/видео.html Otherwise you'll need to make some changes on the install. The change is that you will need to use the scripts on github.com/jetsonhacks instead of github.com/jetsonhacksnano. Here's the updated article on JetsonHacks.com: wp.me/p7ZgI9-3Rc which outlines the changes.
Big thanks to Jim for this and all the other content helping us to get started and then get developing using Jetson. Lighthearted, easy to follow and accurate - what more could we want?
Jim you are a super star of Jetson World, keep up the great work, I am learning a lot from you and I started teaching school kids poor children about Jetson Nano / Python 👍
Thank you for the kind words. You may also be interested in Paul McWhorters channel which is oriented toward high school level teaching on Jetson and other topics: ruclips.net/p/PLGs0VKk2DiYxP-ElZ7-QXIERFFPkOuP4_ Thanks for watching!
Sure glad I found you. I almost gave up on installing Visual Studio Code on a Jetson NX device. I didn't known about going to the right arm.64 install so instead I downloaded the version meant for PC . That was last week. Then I spend days trying to figure out why it won't launch, why I can't use it. Well, after following this I was able to get it up and running. Good job Jim !!! P.S. I did subscribe ;-)
I think it's time for another robot build. This time dividing operations among several nano Jetsons as subsystems and using one as the master controller for the human interface. Perhaps you could use readily available off the shelf components like a wheelchair motor drive assembly. Everything doesn't always need to be a closed loop system. I think you should go big if its in your price range and you have shop space available. Anyway, thank you for all the interaction over the past few years and for being so nice. I hope you have a safe and Merry Christmas...Rick
Thank you for the kind words. Unfortunately there is a major lockdown here. I live in a small house with no shop, so unless I can build something on the kitchen table, it's out of reach. Next year should be more interesting. Happy New Year!
@@JetsonHacks Thats funny because I'm building on the kitchen table too, and sometimes another project on the desk in my bed room. I hope you have a great new year.
Hi Sir, I have a question. I'm using the new Nano B01 and 2 raspberry Pi cameras. I need to change the exposure times of the two cameras, how can I do this?
Great video and thank you! Question : After installing vscode, I had to type "code --no-sandbox" to get it to run. When typing "code" nothing happens. Is there a fix?
Thank you Jim! Could you provide me with a method to completely uninstall Code OSS 1.32 so I can install the latest VS Code as per your instructions without any conflict? Thank you!
I don't have a good answer as I have not worked with the Code OSS for quite some time. I seem to remember that it installs a code-oss .deb package which you could remove with apt-remove. Good luck on your project!
@@JetsonHacks Thank you for the response, much appreciated. I used the following commands: sudo dpkg --remove code-oss sudo dpkg --purge code-oss I don't have any issues using the latest VS Code so far, so it seems to have worked fine!
I get an error when trying to install visual studio, on line 23 "code", I still tried to install with the downloaded file, that file takes you to the software application, press the install button and it does not install, do you know how I could sort out?
Have not been able to add micropython IDE for Raspberry Pi Pico (Raspi suggests Thonny). No success in adding micropython in Visual Studio either. Love your videos!
@@JetsonHacks I found that while there is an updated Thonny for Raspi, there is not for Ubuntu.. Goal is to have Raspi Pico transmit data to Nano via Rx Tx. Keep fire extinguisher close by at all times!
They should be the same. Code OSS is a community build, so there's a couple of more steps involved in installation. I do not know if Code OSS updates automatically like the official version. Thanks for watching!
Hello Jim, so I have a problem facing me with my Jetson nano 2gb, put in note that I don’t know much about single board computers and AI. So what I’m currently facing is that when I updated my jetson nano(well I don’t know if that was a jetson nano update or if it was an ubuntu update, but it had me checking all the files and when it finished it asked me to restart)after I restarted the nano It just showed the nvidia logo and it didn’t boot, please if you know what is wrong let me know, and thanks for reading this whole article BTW, I mean if you did🙃. Sorry for spamming this question, I know I asked twice, once here, and once on your website, but its a nano life and death situation🙃🙃🙃
hii JetsonHacks, it's Deepak from India. I have Nvidia Jetson tx1 with flashed jetpack 4.2. I don't have enough knowledge about jetson tx1 developer kit but I want to learn and do some projects. So can you please provide some social media link to chat with you to solve some my doubts?
I'm doing well, thank you for noticing. New post next week! Also, I've been doing livestreams with the NVIDIA folks every month. Last week: ruclips.net/video/HQBqZEcMIrM/видео.html
This video has been updated. Here's the Jetson Nano video: ruclips.net/video/epSAtsCOii4/видео.html
Otherwise you'll need to make some changes on the install. The change is that you will need to use the scripts on github.com/jetsonhacks instead of github.com/jetsonhacksnano. Here's the updated article on JetsonHacks.com: wp.me/p7ZgI9-3Rc which outlines the changes.
Thank you so much for the video! I'm here because ETA PRIME recommended you in his Jetson Nano 2Gb review video.
You are welcome. ETA Prime is the best!
Big thanks to Jim for this and all the other content helping us to get started and then get developing using Jetson. Lighthearted, easy to follow and accurate - what more could we want?
You could want fame, power, glory and money. But you won't get that from me. Thank you very much for the kind words, and thanks for watching!
Jim you are a super star of Jetson World, keep up the great work, I am learning a lot from you and I started teaching school kids poor children about Jetson Nano / Python 👍
Thank you for the kind words. You may also be interested in Paul McWhorters channel which is oriented toward high school level teaching on Jetson and other topics: ruclips.net/p/PLGs0VKk2DiYxP-ElZ7-QXIERFFPkOuP4_
Thanks for watching!
@@JetsonHacks yes I do Jim, Paul lessons are wonderful too 👍
Sure glad I found you. I almost gave up on installing Visual Studio Code on a Jetson NX device. I didn't known about going to the right arm.64 install so instead I downloaded the version meant for PC . That was last week. Then I spend days trying to figure out why it won't launch, why I can't use it.
Well, after following this I was able to get it up and running. Good job Jim !!!
P.S. I did subscribe ;-)
Thank you for the kind words. I am glad you found the video useful. Thanks for watching, and the subscribe!
Thanks, Jim for another useful video.
You are welcome, and thanks for watching!
I think it's time for another robot build. This time dividing operations among several nano Jetsons as subsystems and using one as the master controller for the human interface. Perhaps you could use readily available off the shelf components like a wheelchair motor drive assembly. Everything doesn't always need to be a closed loop system. I think you should go big if its in your price range and you have shop space available. Anyway, thank you for all the interaction over the past few years and for being so nice. I hope you have a safe and Merry Christmas...Rick
Thank you for the kind words. Unfortunately there is a major lockdown here. I live in a small house with no shop, so unless I can build something on the kitchen table, it's out of reach. Next year should be more interesting. Happy New Year!
@@JetsonHacks Thats funny because I'm building on the kitchen table too, and sometimes another project on the desk in my bed room. I hope you have a great new year.
Please make more electronics programming video on navidia
Muchas gracias, me ayudo mucho, un saludo desde México.
Hi Sir, I have a question. I'm using the new Nano B01 and 2 raspberry Pi cameras. I need to change the exposure times of the two cameras, how can I do this?
Please ask this question on the official NVIDIA Jetson Nano forum, where a large group of developers and NVIDIA engineers share their experience.
@@JetsonHacks Thank you for the reply, already created a topic on thei forum, I hope to receive an answer asap!
Great video and thank you! Question : After installing vscode, I had to type "code --no-sandbox" to get it to run. When typing "code" nothing happens. Is there a fix?
I do not know the answer to this question, I have not encountered this issue. How did you go about installing it?
@@JetsonHacks Yes, it works with the "code --no-sandbox" to start caveat. Great video
Hey sir i'm stuck in the same problem too. Did you solve the problem ?
Thank you Jim! Could you provide me with a method to completely uninstall Code OSS 1.32 so I can install the latest VS Code as per your instructions without any conflict? Thank you!
I don't have a good answer as I have not worked with the Code OSS for quite some time. I seem to remember that it installs a code-oss .deb package which you could remove with apt-remove. Good luck on your project!
@@JetsonHacks Thank you for the response, much appreciated.
I used the following commands:
sudo dpkg --remove code-oss
sudo dpkg --purge code-oss
I don't have any issues using the latest VS Code so far, so it seems to have worked fine!
@@darryng I am glad you got it to work!
I get an error when trying to install visual studio, on line 23 "code", I still tried to install with the downloaded file, that file takes you to the software application, press the install button and it does not install, do you know how I could sort out?
I don't know how to fix your issue given your explanation. There appears to be some issue with line 23 that you'll need to investigate.
Have not been able to add micropython IDE for Raspberry Pi Pico (Raspi suggests Thonny).
No success in adding micropython in Visual Studio either.
Love your videos!
Thanks for the info! And thanks for watching!
@@JetsonHacks I found that while there is an updated Thonny for Raspi, there is not for Ubuntu.. Goal is to have Raspi Pico transmit data to Nano via Rx Tx.
Keep fire extinguisher close by at all times!
Thanks for the video! I was wondering how to setup a CAN bus on jetson nano, have you ever try that? Thanks
Not yet! Sounds like fun, good luck on your project!
Though I disagree with NVIDIA VP MARKETING ATTACKING VIDEO BLOGGERS ABOUT NVIDIA VIDEO CARDS.... MERRY CHRISTMAS TO “”YOU”” SIR!
Thank you! Have a great new year.
Which is recommended VS or pycharm for jetson nano?
Whichever one fits your needs. Thanks for watching!
Hi, what is the difference between it and Code OSS?
They should be the same. Code OSS is a community build, so there's a couple of more steps involved in installation. I do not know if Code OSS updates automatically like the official version. Thanks for watching!
Hello Jim, so I have a problem facing me with my Jetson nano 2gb, put in note that I don’t know much about single board computers and AI. So what I’m currently facing is that when I updated my jetson nano(well I don’t know if that was a jetson nano update or if it was an ubuntu update, but it had me checking all the files and when it finished it asked me to restart)after I restarted the nano It just showed the nvidia logo and it didn’t boot, please if you know what is wrong let me know, and thanks for reading this whole article BTW, I mean if you did🙃.
Sorry for spamming this question, I know I asked twice, once here, and once on your website, but its a nano life and death situation🙃🙃🙃
My understanding is that the update tends to kill the poor little Nano 2GB. Check on the Jetson Nano Forum for help.
hii JetsonHacks, it's Deepak from India. I have Nvidia Jetson tx1 with flashed jetpack 4.2. I don't have enough knowledge about jetson tx1 developer kit but I want to learn and do some projects. So can you please provide some social media link to chat with you to solve some my doubts?
Please ask your questions on the official NVIDIA Jetson TX1 forum, where a large group of developers and NVIDIA engineers share their experience.
Hey Jim. I noticed you haven't posted in a while. I hope all is well.
I'm doing well, thank you for noticing. New post next week! Also, I've been doing livestreams with the NVIDIA folks every month. Last week: ruclips.net/video/HQBqZEcMIrM/видео.html